Mains Connection For B1, B2 And B3; Mains Connection For B4, C1 And C3 - Danfoss VLT CDS 303 Operating Instructions Manual

How to Install

3.3.3 Mains Connection for B1, B2 and B3

NOTICE!
3 3
Frequency converter sizes differ, but terminal numbers
are always the same. Incoming power is always 91, 92,
93 labeled L1, L2, L3.
NOTICE!
For correct cable dimensions see chapter 8 General
Specifications.
Figure 3.7 How to Connect to Mains and Grounding for B1
and B2
Figure 3.8 How to Connect to Mains and Grounding for B3
without RFI
18
®
VLT Compressor Drives CDS 302/CDS 303

3.3.4 Mains connection for B4, C1 and C3

NOTICE!
Frequency converter sizes differ but terminal numbers
are always the same. Incoming power is always 91, 92,
93 labeled L1, L2, L3.
Danfoss A/S © Rev. 2013-07-03 All rights reserved.
Figure 3.9 How to Connect to Mains and Grounding for B3
with RFI
MG34M422