General Computer Operation; Display Levels; Display Modes; Buttons - CycleOps PowerTap SLC+ User Manual

General Computer Operation

DISPLAY LEVELS

The computer has three (3) main display levels:
Top
Middle
Bottom
NOTE: These locations only apply to trip and
interval modes and do not apply to Cycle
or Heart Rate Monitor
to customize display options. (SLC+, SL+ and Pro+ only)

DISPLAY MODES

The computer has two (2) main modes of operation:
1) Trip
2) Interval
Hold [MODE] to toggle between display modes.

BUTTONS

There are two (2) buttons on the computer:
1) [Mode]
2) [Select]
NOTE: [BRACKETED] words indicate buttons.
There are four (4) types of button presses:
1) Press [MODE] or [SELECT] - a single press and release of either [MODE] or [SELECT].
Used for entering different modes and navigating functionality.
Power
Speed
Multi-Function
Computer
Function. See COMPUTER SETUP 4
TRANS.
ICON
INTERVAL
DISPLAY
D
MODE (LEFT)
BOTH
Changes active
Find hub
mode
Clear data
Enter setup
POWER
365
DISPLAY
WATTS
3
25
SPEED
DISPLAY
58.I0
MULTI -
FUNCTION
DISPLAY
SELECT (RIGHT)
Select function
11