CycleOps PowerTap SLC+ User Manual page 25

Year
Std
03
0 1 - 0 1
c
Month Day
Std
e
r
c
1
TABLE 3 - PowerTap Storage Rate
Recording Rate (sec)
1 sec.
2 sec.
Std
r
CI
1
2096
5) Press [SELECT] to toggle through digit values to set minutes in time of
day. Press [MODE] to save.
6) Press [SELECT] to toggle through digit values to set year, month, and
date. Press [MODE] to save.
7) Press [SELECT] to toggle through storage rate values (1, 2 seconds).
Press [MODE] to save. NOTE: Different storage rates yield different amounts
of total storage time. Changes to the storage rate do not effect display
information. Refer to TABLE 3 for appropriate storage rate.
SLC+, SL+, Pro+ and 2.4+ (hrs)
12
24
8) Press [SELECT] to toggle through digit values to set the wheel circumfer-
ence. Press [MODE] to save. Refer to TABLE 4 for common tire information.
NOTE: For the most accurate reading perform a roll out measurement
(mm) of the rear wheel.
Elite + (hrs)
6
12
25