General Computer Operation - CycleOps Cervo 2.4 Owner's Manual

General Computer Operation

DISPLAY LEVELS
The computer has three (3) main display levels:
Top
Middle
Bottom
NOTE: The current display level is indicated by two
black cursors located on either side of the computer
display. (FIGURE 7)
BUTTONS
There are two (2) buttons on the computer:
1) [Mode]
2) [Select]
NOTE: [BRACKETED] words indicate buttons.
There are five (5) types of button presses:
1) Press [MODE] or [SELECT] = a single press and release of either [MODE] or
[SELECT].
2) Hold [MODE] or [SELECT] = a single button press and hold of either
[MODE] or [SELECT] for 2 sec.
3) Press [MODE] and [SELECT] = simultaneously press and release of both
[MODE] and [SELECT].
Heart Rate
•
Speed
•
Multi-Function Display
•
INTERVAL 3
DISPLAY
D
MODE (LEFT)
BOTH
Changes active
Clear data
mode
Enter setup
Find
CURRENT HEART
144
RATE
3
25
2.4
SPEED
DISPLAY
58.I0
MULTI
DISPLAY
SELECT
Select function
10