Computer Setup 1 - CycleOps PowerTap SLC+ User Manual

COMPUTER SETUP 1

This setup menu includes: time of day, date, storage rate, wheel circumference, units of measure,
odometer and lactic threshold. NOTE: You are unable to move back to previously viewed set-
tings. You must restart setup 1 to make corrections. You may hold [MODE] and [SELECT] to save
and exit setup.
Set
t
E
d
1 2 3 4 5
Std
12
t
Std
p
t
Std
p
12:00
t
1) From the computer setup main menu press [SELECT] and scroll until the
number one (1) is flashing. Press [MODE] to enter setup mode.
2) Press [SELECT] to toggle between a 12 or 24 hour clock. Press [MODE] to
save.
3) Press [SELECT] to toggle between AM (A) or PM (P). Press [MODE] to
save.
4) Press [SELECT] to toggle through digit values to set hours in time of day.
Press [MODE] to save.
24