Computer Setup 2 - CycleOps PowerTap SLC+ User Manual

COMPUTER SETUP 2 (SLC+, SL+, Pro+ and 2.4+ only)
This setup menu includes: rate of display for watts, speed, and cadence. NOTE: You are unable to
move back to previously viewed settings. You must restart setup 2 to make corrections. NOTE:
These settings do not effect the data stored for download.
This function can be used to allow better pacing during time trial efforts. A greater rate of dis-
play allows for a slower update of the display.
Set
t
E d
1 2 3 4 5
PRO
AV WATTS
2
2
PRO
3
2
AV MI
PRO
5
2
C AV
1) From the computer setup main menu press [SELECT] and scroll until the
number two (2) is flashing and press [MODE] to enter setup mode.
2) Press [SELECT] to toggle through (1, 2, 3, 5 10, 30) rate of display values in
seconds for watts. Press [MODE] to save.
3) Press [SELECT] to toggle between (1, 2, 3, 5 10, 30) rate of display values
in seconds for speed. Press [MODE] to save.
4) Press [SELECT] to toggle between (1, 2, 3, 5 10, 30) rate of display values
in seconds for cadence. Press [MODE] to save.
6) Press [SELECT] then [MODE] to reset default settings. Press [MODE] to
save changes.
27