Reset - Barco NSL-4601 User Manual

KLF
Reply to PC
ID
(char-3~5Bytes)
(0)
Data
(char-1Byte)
0
1
or
ID
(char-3~5Bytes)
(0)
3.6.3

RESET

This function is for setting default value of next item.
Picture
Sharpness(50), Color Tone(Cool2), Size(Wide), Mode(Auto), H/V-Position(50), Clock(50),
Phase(50),
Language(English), OSD Tone(Off), Key Lock(Off).
- Clock (Frequency): This function is for adjusting of picture quality only in PC input.
-Phase: This function is for detail adjusting of picture quality only in PC input.
-Mode : This is for force selecting of Auto/1368x768/1366x768/1280x768/1024x768 mode.
1368x768/1366x768/1280x768/1024x768 mode have very similer timming data so scaler
can't detect correct timing mode automatically. And then user need to select manually.
- NR : This means Noise Reduction. This function is for reducing noise of picture in COMPONENT/S-
VIDEO/VIDEO input.
-Film Mode: This function makes better video quality in normal movie picture.
This function is for only COMPONENT/S-VIDEO/VIDEO input
-On Time : This function is for wake up time when the set is power off(not ac power unplug)
automatically.
-Off Time : This function is for set off time when the set is power on(not ac power unplug)
automatically.
-On Source : This function is for set source when the set is power on at On time.
Send to monitor
Head
(char-2Bytes)
K:
RS232 Protocol NSL-4601
Off
Return Cmd Data
(char-4Bytes) (char-1Byte)
KLC= 1
Key Lock
On
Off
NACK
(Hexa-1Byte)
0x15
Mode(Middle or Standard),
NR(On), Film Mode(Off),
Normal movie picture is originally 24 frame. When make 30 frame video 6 frame is
added. Because of this picture is just a little unstable. Film mode compensate this.
ID
(char-3Bytes)
000
Data End
(char-2Bytes "\r\n")
Brightness(50),
On Time(Off),
Send Cmd Cmd end
(char-3Bytes) (char-1Byte)
EIN .
ACK
(Hexa-1Byte)
\r\n 0x06
Contrast(50),
Off Time(Off),
Color(50), Tint(50),
On Source(PC),
46 of 58