Ensemble S9: Gsm Mobile Equipment, Control, And Status; At+Cpas Phone Activity Status - Ericsson T39 At Command Reference

4.17 Ensemble S9: GSM Mobile Equipment, Control, and Status

4.17.1 Commands
AT+CPAS
Description:
Execution command:
Execution command
response:
Test command:
Test command
response:
Parameters:
<mode>:
<pas>:
Phone Activity Status
Returns the activity status <pas> of the ME. It can be used to interrogate the ME
before requesting action from the phone. If the command is executed without the
<mode> parameter, only <pas> values from 0 to 128 are returned. If the <mode>
parameter is included in the execution command, <pas> values from 129 to 255 may
also be returned.
AT+CPAS[=<mode>]
+CPAS: <pas>
AT+CPAS=? Shows if the command is supported.
+CPAS: (list of supported <pas>s)
<mode>
1
<pas>
0
3
4
129
130
131
Description
Allows the CPAS to return Ericsson-specific <pas> values
Default setting
Description
Ready (ME allows commands from TA/TE)
Ringing (ME is ready for commands from TA/TE, but the
ringer is active)
Call in progress (ME is ready for commands from TA/TE,
but a call is in progress)
MMI is in idle state. This is a sub-state to 'ready' (0) and has
the following definition:
• MMI in idle state, meaning that operator, clock, and date
is shown on the display
• No conversation or data call in progress
• No sub-menus shown on the display
• Only digits, 'clear', '*', 'NO', and '#' allowed in this state
Mobile-oriented call in progress. Sub-state to 'Call in
progress' (4)
Mobile-terminated call in progress. Sub-state to 'Call in
progress' (4)
AT Commands Phone Terminal Terminated 68