At+Cmgw Write Message To Memory - Ericsson T39 At Command Reference

<toda>:
<mr>:
AT+CMGW
Description:
Execution command:
Execution command
response:
Test command:
Parameters:
<length>:
<stat>:
<pdu>:
<index>:
GSM 04.11 TP-Address Type-Of-Address octet; in integer format.
<toda>
129
145
161
128-255
Integer; GSM 03.40 TP-Message-Reference.
Write Message To Memory
Stores a message to message storage <mem2> (see AT+CPMS). The memory location
<index> of the stored message is returned. By default, message status will be set to
'stored unsent', but parameter <stat> also allows other status values. If writing fails,
+CMS ERROR is returned.
AT+CMGW=<length>[,<stat>]
<pdu><'ctrl-z/ESC'>
+CMGW: <index>
AT+CMGW=? Shows if the command is supported.
Integer; with AT+CMGF='0', this value indicates the length of the actual TP data
unit (in octet units).
<stat>
0
1
2
3
In case of SMS: GSM 04.11 SC address followed by GSM 03.40 TPDU in
hexadecimal format. ME/TA converts each octet of TP data unit into two
IRA-character long hexadecimal numbers.
In case of CBS: GSM TPDU in hexadecimal format.
Integer; value in the range of location numbers supported by the associated memory.
Description
ISDN / telephony numbering plan, national/international
unknown
Default setting if '+' is not in <da>
ISDN / telephony numbering plan, international number
Default setting if '+' is in <da>
ISDN / telephony numbering plan, national number
Valid values, see GSM 04.08 section 10.5.4.7
Description
Received unread (new) message
Default setting
Received read message
Stored unread message (only applicable to SMs)
Stored sent message (only applicable to SMs)
AT Commands Phone Terminal Terminated 101