Ericsson T39 At Command Reference page 132

<iphone>:
<acapacity>:
<ccapacity>:
<ncapacity>:
<tempbatt>:
<tempphone>:
<bcapacity>:
<chargestate>:
AT*ENAD
Description:
Set command: AT*ENAD=[<index>][,<name>,<userid><password>,<bearer>,(bearer settings_1)]
Set command response:*ENAD: <index>[,<cid>]
Read command:
Integer; phone current consumption. Number of mA. Range: 0-65500.
Integer; added capacity during charge. Number of mAh, multiplied by 20.
Range: 0-65500.
Integer; consumed capacity during charge. Number of mAh, multiplied by 20.
Range: 0-65500.
Integer; nominal capacity during charge. Number of mAh, multiplied by 20.
Range: 0-65500.
Integer; battery temperature in degrees Celsius, -20 deg C - +70 deg C.
Integer; phone temperature in degrees Celsius, -20 deg C - +70 deg C.
<bcapacity>
0
1
2
<chargestate>
0
1
2
3
4
5
6
7
Internet Account Define
This command is used for defining an Internet Account. An IA is called a "Data
Account" in the phone MMI.
<bearer>
0
1
Note: If the AT*ENAD command is issued with only the <index> parameter, this is
interpreted as a request for the corresponding account to be deleted.
AT*ENAD? Displays the current <index>s
<name>s,<userid>,,<bearer>,(bearer_settings_2).
Note: Extra comma between <userid> and <bearer>.
<bearer>
0
1
Description
Slim battery
Standard battery
High-capacity battery
Description
Start
Charge
Await
Handheld
Charge completed; safety timer
Charge completed; dT/dt
Charge completed; dv2/dt2
Charge completed; flat V
(bearer_settings_1)
<dialup_nr>,<dial_type>,<data_rate>
<pref_serv>,<pap_chap>
(bearer_settings_2)
<dialup_nr>,<dial_type>,<data_rate>,<lock_state>
<pref_serv>,<pap_chap>,<cid>,<lock_state>
AT Commands Phone Terminal Terminated 130