Ensemble C4: Interface Commands; Ats3 Command Line Termination Character; Ats4 Response Formatting Character - Ericsson T39 At Command Reference

4.3 Ensemble C4: Interface Commands

4.3.1 Commands
ATS3
Description:
Set command:
Read command:
Test command:
Test command
response:
Parameter:
<value>:
ATS4
Description:
Set command:
Read command:
Test command:
Test command
response:
Parameter:
<value>:
Command Line Termination Character
Defines the character to be used as the line termination character. This is used both for
detection of an end-of-command and in formatting of responses.
ATS3=<value>
ATS3? Displays the current <value> setting.
ATS3=? Shows if the command is supported.
S3: (list of supported <value>s)
<value>
0-127
13
Response Formatting Character
Defines the character to be used as the response formatting character.
ATS4=<value>
ATS4? Displays the current <value> setting.
ATS4=? Shows if the command is supported.
S4: (list of supported <value>s)
<value>
0-127
10
Description
Command line termination character
Command line termination character = <CR>
Default setting.
Description
Command line termination character
Formatting character = <LF>
Default setting
AT Commands Phone Terminal Terminated 24