Install Checklist; Appliance Setup - Quadra-Fire Explorer III EXP-III-APAC Installation And Operating Instrucitons

Acc wood burner

Table of Contents

EXP-III Wood Burner

5700 Step Top ACC Wood Burner

G. Install Checklist

This standard work checklist is to be used by the installer in conjuction with, not istead of, the instructions contained in this installation manual.

Hearth & Home Technologies welcomes you to our tradition

_________________________________________________________________________________

Customer:

of excellence! In choosing a Quadra-Fire appliance, you

______________________________________________________________________________

Date Installe:

have our assurance of commitment to quality, durability, and

______________________________________________________________________________

Lot / Address:

performance.

Location of Appliance:

___________________________________________________________________________________

This commitment begins with our research of the market,

Installer:

including 'Voice of the Customer' contacts, ensuring we

Dealer / Distributor Phone #:

___________________________________________________________________________________

make products that will satisfy your needs. Our Research

Serial #:

and Development facility then employs the world's most

____________________________________________________________________________________

Model:

advanced technology to achieve the optimum operation of

WARNING! Risk of Fire or Exposion!

Appliance Install

Verified clearances to combustibles.

Appliance is leveled and connector is secured to appliance.

Hearth extension size/height decided.

Outside air kit installed.

Floor protection requirements have been met.

This appliance has been TESTED TO AS/NZS4013 for Hardwood by Vipac Report # 30A-14-0102-TRP-361517-0 Date tested: April 2015

If appliance is connected to a masonry chimney, it should be cleaned and

inspected by a professional. If installed to a factory built metal chimney, the

chimney must be installed according to the manufacturer's instructions and

MODEL QUADRA-FIRE 5700 step top acc Freestanding Wood Stove

clearances.

OVERALL AVERAGE EFFICIENCY BURNING SOFTWOOD

Chimney

WHEN TESTED IN ACCORDANCE WITH AS/NZS 4012: .........................................................

Chimney configuration complies with diagrams.

AVERAGE PARTICULATE EMISSION FACTOR BURNING SOFTWOOD

Chimney installed, locked and secured in place with proper clearance.

WHEN TESTED IN ACCORDANCE WITH AS/NZS 4013: .........................................................

Chimney meets recommended height requirements (14-16 feet).

MAXIMUM AVERAGE HEAT OUTPUT BURNING SOFTWOOD:

Roof flashing installed and sealed.

APPROVED FUEL:

Terminations installed and sealed.

Wetback - All Models: .........................................................................................

Clearances

Manufactured By: ...............................................................................................Hearth & Home Technologies, 352 Mountain House Road,

Combustible materials not installed in non-combustible areas.

Verified all clearances meet installation manual requirements.

Mantels and wall projections comply with installation manual requirements.

Serial No. /

Protective hearth strips and hearth extension installed per manual requirements.

de série:

Appliance Setup

NOTE:

All packaging and protective materials removed.

PERFORMANCE MAY VARY FROM TEST VALUES DEPENDING ON ACTUAL OPERATING CONDITIONS.

U.S. ENVIRONMENTAL PROTECTION AGENCY

Firebrick, baffle and ceramic blanket installed correctly.

Export stove. May not be operated within the United States

All labels have been removed from the door.

All packaging materials are removed from inside/under the appliance.

Manual bag and all of its contents are removed from inside/under the appliance

and given to the party responsible for use and operation.

Hearth & Home Technologies recommends the following:

•

Photographing the installation and copying this checklist for your file.

•

That this checklist remain visible at all times on the appliance until the installtion is complete.

Comments: Further description of the issues, who is responsible (Installer/Builder/Other Trades, etc.) and corrective action needed:

Comments communicated to party responsible ____________________________ by _____________________ on ___________

Page 8

Page 2

August 13, 2018

REVISIONS

ATTENTION INSTALLER:

ATTENTION INSTALLER

Follow this Standard Work Checklist

and Welcome to the Quadra-Fire Family

________________________________________________________________________

___________________________________________________________________

Failure to install appliance according to these instruction can lead to a fire or explosion.

5700 STEP TOP ACC

ACC WOODFIRE COMPLIANCE LABEL

...............................................................................................................

BARCODE LABEL

(Builder / Gen. Contractor)

ECO #

DATE

our stoves, inserts and fireplaces. And yet we are old-fash-

ioned when it comes to craftsmanship. Each unit is meticu-

lously fabricated and surfaces are hand-finished for lasting

beauty and enjoyment. Our pledge to quality is completed

as each model undergoes a quality control inspection.

We wish you and your family many years of enjoyment in

the warmth and comfort of your hearth appliance. Thank

you for choosing Quadra-Fire.

YES

65%

1.5 g/kg

12.7 kW

..........................

BURN ONLY HARDWOOD WITH A MOISTURE CONTENT

LESS THEN 25% (dry basis).

Halifax, PA 17032, United States of America

Date of Manufacture / Date de fabrication:

2017 2018 2019 JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC

UNLESS OTHERWISE SPECIFIED DIMS ARE INCHES[MM] & : TOLERANCES ARE: (2) PLACE DEC : ± 0.03

OUTSIDE MATERIAL.

NORMAL DIM & INSIDE MATERIAL.

7038-201G

7060-228K

CONFIDENTIAL PROPERTY OF HEARTH & HOME TECHNOLOGIES INC.

Explorer III Wood Stove

ITEM

PART NUMBER

IF NO, WHY?

______________________________________

INSTALLATION

______________________________________

DATE:

______________________________________

(Installer)

OUTSIDE APEX

PART NAME:

DRAWN BY:

SCALE:

THIS PRINT IS CHECKED AND CONTROLLED BY THE ENGINEERING

DEPARTMENTS OF HEARTH & HOME TECHNOLOGIES INC.

PART NAME

7038-200_R4

(Date)

(3) PLACE DEC: ± 0.005

ANGLE: ± 2°

INSIDE APEX - DIMS ENCLOSED BY AN OVAL ARE CR

1 May, 2019

MATERIAL:

19 January, 2018

SHEET:

PART NU

Table of Contents

Install Checklist; Appliance Setup - Quadra-Fire Explorer III EXP-III-APAC Installation And Operating Instrucitons

Appliance Setup

Related Manuals for Quadra-Fire Explorer III EXP-III-APAC

Related Content for Quadra-Fire Explorer III EXP-III-APAC

Table of Contents