Table of Contents
Advertisement
EXP-III Wood Burner
5700 Step Top ACC Wood Burner
AUSTRALIAN WARRANTY INFORMATION
Hearth & Home Technologies welcomes you to our tradition
of excellence! In choosing a Quadra-Fire appliance, you
have our assurance of commitment to quality, durability, and
HHT extends the following manufacturer's warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased
performance.
from an HHT authorized dealer.
This commitment begins with our research of the market,
including 'Voice of the Customer' contacts, ensuring we
HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance
make products that will satisfy your needs. Our Research
at the site of installation within two years following the date of original purchase, that the HHT appliance will be free from defects in
materials and workmanship at the time of manufacture.
and Development facility then employs the world's most
advanced technology to achieve the optimum operation of
After installation, if covered components manufactured by HHT are found to be defective in materials or workmanship during the applicable
warranty period, HHT will, at its option, repair or replace the covered components. HHT, at its own discretion, may fully discharge all of
its obligations under this manufacturer's warranty by replacing the product itself or refunding the verifi ed purchase price of the product
itself. The maximum amount recoverable under this warranty is limited to the purchase price of the product. This warranty is subject to
conditions, exclusions and limitations as described below.
Warranty coverage begins on the date of original purchase. In the case of new home construction, coverage under this manufacturer's
warranty begins on the date of fi rst occupancy of the dwelling or six months after the sale of the product by an independent, authorized
HHT dealer/ distributor, whichever occurs earlier. The warranty period for this manufacturer's warranty shall commence no later than 24
This appliance has been TESTED TO AS/NZS4013 for Hardwood by Vipac Report # 30A-14-0102-TRP-361517-0 Date tested: April 2015
months following the date of product shipment from HHT, regardless of the installation or occupancy date. The manufacturer's warranty
period for parts and labor for covered components is produced in the following table.
MODEL QUADRA-FIRE 5700 step top acc Freestanding Wood Stove
The term "Limited Lifetime" in the table below is defi ned as: 20 years from the beginning date of warranty coverage for gas appliances,
and 10 years from the beginning date of warranty coverage for wood, pellet and coal appliances. These time periods refl ect the minimum
OVERALL AVERAGE EFFICIENCY BURNING SOFTWOOD
expected useful lives of the designated components under normal operating conditions.
WHEN TESTED IN ACCORDANCE WITH AS/NZS 4012: .........................................................
AVERAGE PARTICULATE EMISSION FACTOR BURNING SOFTWOOD
WHEN TESTED IN ACCORDANCE WITH AS/NZS 4013: .........................................................
Warranty Period
MAXIMUM AVERAGE HEAT OUTPUT BURNING SOFTWOOD:
Parts
Labor
APPROVED FUEL:
Wetback - All Models: .........................................................................................
1 Year
Manufactured By: ...............................................................................................Hearth & Home Technologies, 352 Mountain House Road,
Serial No. /
HF
N
de série:
o
2 years
NOTE:
PERFORMANCE MAY VARY FROM TEST VALUES DEPENDING ON ACTUAL OPERATING CONDITIONS.
3 years
U.S. ENVIRONMENTAL PROTECTION AGENCY
Export stove. May not be operated within the United States
5 years
1 year
7 years
3 years
10
1 year
years
Limited
3 years
Lifetime
90 Days
Page 16
19 January, 2018
Page 2
REVISIONS
and Welcome to the Quadra-Fire Family
Hearth & Home Technologies Inc (HHT)
1445 N. Highway | Colville, WA 99114 | (509-684-3745)
5700 STEP TOP ACC
ACC WOODFIRE COMPLIANCE LABEL
Hearth and Home Technologies Manufactured Appliances and Venting
Gas
Wood
Pellet
...............................................................................................................
X
X
BARCODE LABEL
X
X
X
X
X
X
X
X
X
ECO #
DATE
BY
our stoves, inserts and fireplaces. And yet we are old-fash-
ioned when it comes to craftsmanship. Each unit is meticu-
lously fabricated and surfaces are hand-finished for lasting
beauty and enjoyment. Our pledge to quality is completed
as each model undergoes a quality control inspection.
We wish you and your family many years of enjoyment in
the warmth and comfort of your hearth appliance. Thank
you for choosing Quadra-Fire.
65%
1.5 g/kg
12.7 kW
..........................
EPA
Coal
BURN ONLY HARDWOOD WITH A MOISTURE CONTENT
Wood
LESS THEN 25% (dry basis).
X
X
X
Halifax, PA 17032, United States of America
X
X
X
Date of Manufacture / Date de fabrication:
2017 2018 2019 JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
X
X
X
X
X
X
X
X
X
X
X
X
X
X
UNLESS OTHERWISE SPECIFIED DIMS ARE INCHES[MM] & : TOLERANCES ARE: (2) PLACE DEC : ± 0.03
OUTSIDE MATERIAL.
NORMAL DIM & INSIDE MATERIAL.
7038-201G
7038-201G
7038-201G
CONFIDENTIAL PROPERTY OF HEARTH & HOME TECHNOLOGIES INC.
5700 Step Top ACC Wood Burner
!
ITEM
Components Covered
Electric
Venting
All parts and material
except as covered by
X
X
Conditions, Exclusions,
and Limitations listed
Igniters, electronic
components, and glass
Factory-installed blowers
Molded refractory panels
Firepots and Burnpots
INSTALLATION
DATE:
Castings and baffl es
Manifold tubes,
HHT chimney and
Burners, logs and
Firebox and heat
All replacement parts
X
X
beyond warranty period
OUTSIDE APEX
PART NAME:
DRAWN BY:
THIS PRINT IS CHECKED AND CONTROLLED BY THE ENGINEERING
DEPARTMENTS OF HEARTH & HOME TECHNOLOGIES INC.
PART NUMBER
PART NAME
7038-200_R4
termination
refractory
exchanger
(3) PLACE DEC: ± 0.005
ANGLE: ± 2°
INSIDE APEX - DIMS ENCLOSED BY AN OVAL ARE CR
1 May, 2019
Page 13
SCALE:
MATERIAL:
19 January, 2018
SHEET:
FR
PART NU
Advertisement
Table of Contents
