Table of Contents
Advertisement
5700 Step Top ACC Wood Burner
GENERAL INSTRUCTIONS FOR FLUE SYSTEM
1. Unpack the Flue Mounted Shield, detach the three brackets and familarize yourself with the illustra-
tions.
it meets the outer shield (refer sketch). Cut along the full length of the Flue Mounted Shield on both
ITEM
PART NUMBER
4. Fit the top bracket to the Flue Mounted Shield as illustrated ensuring the rear mid section of the
Two tabs are provided and if folded back at 90 degrees the bracket and Flue Mounted Shield will
mount lower onto the appliance.
The Flue Mounted Shield then locates into the two notches provided n bracket "5B" as illustated.
grill to be removed.
7. Using the pre-punched holes in the two tabs provided on the top bracket as guides, drill into the
MINIMUM HEIGHT OF FLUE SYSTEM EXIT
7038-200_R4
Fig. 8
DATE:
6000
increase as necessary
until nothing within
6000mm of flue top
(3) PLACE DEC: ± 0.005
INSIDE APEX - DIMS ENCLOSED BY AN OVAL ARE CRITICAL DIMENSIONS
Any nearby structure
Page 10
1 May, 2019
SCALE:
MATERIAL:
19 January, 2018
SHEET:
PART NAME
QTY
ANGLE: ± 2°
FRACTION: ± 1/16
REV:
PART NUMBER:
3000
More than 3000
or less
600 min.
7038-201G
7038-201G
EXP-III Wood Burner
f both the lower outer legs from the
.
3000
increase from 1000mm
minimum until clear within
3000mm of flue top
Page 13
19 January, 2018
Advertisement
Table of Contents
