ActronAir QUE QZB-100 Installation And User Manual page 4

Wall Mount Dimensions
43mm
CTR
Zone Controller Mount
H x W = 81.1mm x 65.3mm
Zone Device Combination Options
Option 1 Option 2 Option 3
Zone controller Remote sensor Zone controller
only only + remote sensor
(averaging)
Dining Dining
Dining 24.0 C o 24.0 C o Dining
24.0 C o 24.0 C o
Zone OFF Zone OFF
Zone OFF
Zone OFF
AC OFF AC OFF
AC OFF AC OFF
OFF OFF
OFF OFF
  
Dining 24.0 C Dining 24.0 C o
o Dining Dining
Zone OFF 24.0 C o 24.0 C o Zone OFF
AC OFF Zone OFF Zone OFF AC OFF
AC OFF AC OFF OFF
OFF
OFF OFF
NOTE: Following options are not allowed: (1) Master Controller + Zone Controller or (2) Two zone controller
6
43mm
CTR
Remote Sensor Mount
H x W = 51.3mm x 63.3mm
Option 4
2 remote sensor Master controller
(averaging) + remote sensor
Dining Dining
Dining
24.0 C o 24.0 C o 24.0 C o
Zone OFF Zone OFF
Zone OFF
AC OFF AC OFF AC OFF
+ OFF OFF +
OFF

Dining Dining
24.0 C o 24.0 C o 24.0 C Dining o
Zone OFF Zone OFF
AC OFF AC OFF Zone OFF
AC OFF
OFF OFF
OFF
Wall Installation
Run a green Cat5E cable through a 25mm diameter hole in the wall.
Plug in RJ45 connector and secure the controller in the control bracket.
Available ActronAir Cat5E green cable:
P.N. 4070-027 7 metres
P.N. 4070-031 20 metres
1
To 12VDC Power Source
Option 5
Wall mates (x2)
Plyboard wall
+

NOTE:
Use provided wall plugs (x2) in lieu of wall mates if applicable. Use the
provided screws. Wall mates or wall plugs must be totally flush to the wall.
Hole for cable MUST not be MORE THAN than 25mm diameter.
Zone controller or
2
remote sensor
Screw (x2)
Control bracket
7