Installing Ups; Installing Iabb - Huawei iSiteC BTS3601C Installation Manual

Installation Manual
iSiteC BTS3601C CDMA Base Station
1) Nut M12
5) Beam
Figure 2-39 Fixing AC lightning protection box (on pole)

2.4.3 Installing UPS

Generally, there are four modes to install a UPS, i.e. on ground base, wall, metal mast
(with the diameter of v60~v114) or pole (with the diameter of v150~v350).
The detailed installation method of UPS is available in the installation guide of the UPS
supplier.

2.4.4 Installing IABB

I. Structure
The box provents the backup battery groups of BTS3601C from being damaged so as
to provide the BTS3601C with backup power. Its structure is similar to that of
BTS3601C and IAFB.
Inside the box, 6 batteries can be installed. When the box is used independently, only
two batteries are used generally. When the box works together with the UPS, the 6
batteries of it are used. Following are the technical items of the battery:
Voltage rating of a battery is 12V. When 6 batteries are in series, the voltage rating
l
is 72V.
Capacity rating: 26Ah.
l
Work temperature: -15°C~+45°C
l
2) Spring washer 12 3) Plain washer 12
6) Pole 7) Sun-shading cover
2-39
Hardware Installation
2 Installing Cabinet Hardware
4) M12 bolt
8) AC lightning protection box