Users; Predefined Users - Interlogix ATSx500A Series Installation And Programming Manual

Chapter 3: System functions

Users

Users are identified to the Advisor Advanced system by a unique number that is
associated with the user's PIN or card.
Note: If the system is EN 50131 compliant, you can edit only your own settings,
and configure only newly added users. See "User data lock" on page 61 for more
details.
For each user, the system records the following:
• Number
• Name
• PIN
• Card ID number
• Phone number
• User group (which determines options the user can access)
• Door group (which determines regions the user can access)
• Language
• Various programmed options
Note: Your own user group might not allow you to program PINs. If it does allow
use of this option, there might still be restrictions on which user groups you are
allowed to update.
Maximum user number in the system is defined in "Specifications" on page 35.
Note: Connecting door controllers to the Advisor Advanced system increases the
maximum user number in the system (see "Specifications > Access control
features" on page 37 for details). However, additional users do not have the
following records:
• Phone number
• Language

Predefined users

There are two predefined users in the system:
• Installer is used to enter the Advisor Advanced system configuration. He has
user group "Installer group" assigned.
• A user with default name Supervisor who can grant access to the installer
menu for the service engineer. He has user group "Supervisor group"
assigned. The default supervisor PIN is 1122.
Note:
If the configured PIN length is configured for more than 4 digits, zeroes are
added to the default PIN values. For example, if the system is configured for 6-
digit PINs, the supervisor PIN is 112200.
60 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual