Tektronix 2215 Instruction Manual page 201

Current Limit Circuit Board
To remove the Current L im it board, perform the fo llo w ­
ing steps:
1. Remove the High-Voltage shield
Voltage S hield" removal procedure).
2. Disconnect the fo u r single-wire connectors fro m the
Current L im it board (P801, P802, P803, and P804).
3. Remove the screw and n u t w hich secure the Current
L im it board to the chassis frame.
To reinstall the Current L im it board, perform
follo w in g steps:
4. Reinstall the securing screw and nut (removed in
step 3).
5. Reconnect the fo u r single-wire connectors (removed
in step 2).
6. Reinstall the High-Voltage shield (see the "H igh-
Voltage Shield" reinstallation procedure).
(see the "H igh-
the