Your System Participates In Cns As One Of Sony Camera - Sony CNA-1 Technical Manual

Your system participates in CNS as one of Sony camera

CCU (1)
MCS mode: Client
Camera head
CCU No. (1)
CCU (2)
MCS mode: Client
Camera head
CCU No. (2)
Your system work
as camera
CNA-1
Device No. (3)
CNA-1 setup
For details of the following setting items, see "Operation Manual (page 17).
"
CNS Configuration CNS Mode
Master Mode
Master IP Address
Target IP Address
Device No.
Gateway Configuration Gateway Mode
Emulation Mode
Device No. Configuration for CNA-1
In this case, Device number of CNA-1 must be set to different number from CCUs connected to the network. CNA-1 will be
recognized as one of camera and CNA-1's Device number is handled as CCU number in CNS.
CNA-1's Device number is set to (3). Therefore, MSU can find CNA-1 as Camera (3) and also RCP (3) can control CNA-1 as
Camera (3).
RCP (1)
MCS mode: Client
RCP No. (1)
Network hub
MSU
MCS mode: Master
MCS
Disable
Master MSU's IP address
Variable
Depends on CCUs connected
to the network.
Enable
CAM
RCP (2) RCP (3)
MCS mode: Client MCS mode: Client
RCP No. (2) RCP No. (3)
CNA-1 Configuration
7