Example Of Startup Sequence (Your System Works As Controller) - Sony CNA-1 Technical Manual

Example of Startup Sequence (your system works as Controller)

Your system (works
as Control panel)
2: Startup ( )
10: [socket] connect (port: XXXX)
12: [SSCP] scan_camera_status ( )
16: [SSCP] reply_status ( )
17: refresh ( )
14
Sony Simple Camera Protocol
11: [socket] accept ( )
Send status query
command(s) your
system want to receive
CNA-1
1: Startup ( )
4: [socket] listen (port: 7700)
5: [socket] connect (port: 7700)
6: [socket] accept ( )
7: [SPP] start_session ( )
8: [SPP] session_accept ( )
9: [socket] listen (port: XXXX)
13: [SPP] scan_camera_status ( )
15: [SPP] reply_status ( )
Sony Camera
3: Startup ( )
This port number can be
set to any port other
than 7700 or 1-1023.
14: change
camera status ( )