List Of Available Commands - Sony CNA-1 Technical Manual

List of available commands

Command Command
Category Type
Bit
command
System
Control
Other
command
24
List of available commands
Command
Command CMD_GP PARAM0
Name (Relative/
Absolute)
tally 0x08
SENDER_
call 0x0b
SRCID
SENDER_
panel_active 0x0b
SRCID
SENDER_
iris_active 0x0b
SRCID
SENDER_
para 0x0b
SRCID
PARAM1 PARAM2
TALLY_
0x20 –
DATA
CALL
0x00
VALUE
CONTROL
0x01
VALUE
CONTROL
0x02
VALUE
CONTROL
0x03
VALUE
Usage
* Receive only
When Sony CCU inputs a Tally signal via
External I/O, The CCU sends the tally
command to CNA-1
TALLY_DATA=
bit0 Red
bit1 Green
bit2 Yellow
SENDER_SRCID=
0x90 when your system works as
Controller
0x20 when your system works as Camera
CALL VALUE=
0x80 current status query
0x81 Call off
0x82 Call on (two seconds)
SENDER_SRCID=
0x90
CONTROL VALUE=
0x00 Current active status query
0x01 Active-off (release own control to
Camera)
0x02 Active-on (get control to Camera)
0x81 Active-off status reply
0x82 Active-on status reply
*This command is available in condition of
Panel Active Function of CNA-1 is enabled
(default is disable).
Same as panel_active command but this
command affects only Iris and MasterBlack
control.
Same as panel_active command but this
command does not affect permission of
another control panel (parallel control can be
used).
* Iris, Master Black, all absolute word
commands are not allowed in the permission
received by this command.