Example Of Startup Sequence (Your System Works As Camera) - Sony CNA-1 Technical Manual

Example of Startup Sequence (your system works as Camera)

Your system
(work as Camera)
2: Startup ( )
5: [socket] connect (port: XXXX)
6: [socket] accept ( )
13: [SSCP] send_command ( )
14: change_camera_status ( )
15: [SSCP] reply_command ( )
CNA-1
1: Startup ( )
4: [socket] listen (port: XXXX)
7: [socket] listen (port: 7000)
8: [socket] connect (port: 7700)
9: [socket] accept ( )
10: [SPP] start_session ( )
11: [SPP] session_accept ( )
12: [SPP] scan_camera_status ( )
16: [SPP] reply_camera_status ( )
Sony Control Panel
3: Startup ( )
This port number can be
set to any port other
than 7700 or 1-1023.
17: Refresh_display ( )
Sony Simple Camera Protocol
15