System - Sony STR-DG710 Operating Instructions Manual

Multi channel av receiver
Hide thumbs Also See for STR-DG710:
Table of Contents

Advertisement

Insert two R6 (size-AA)
batteries
in the
RM-AAU014
remote
commander.
Observe
the correct
polarity
when installing
batteries.
Notes
• Do m)t leave the remote in an extrmnely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix alkaline batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time. remove the batteries to
aw)id possible damage from battery leakage and
corrosion.
• When you replace the batteries, the remote buttons
may be reset to their factory settings. If this
happens, reassign the buttons again/page
74).
rip
Under normal conditions, the batteries should last
for about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new
ones.
6: Selectingthe speaker
system
You can select the front speakers
you want to
drive.
Be sure to use the buttons
on the receiver
tUr
this operation.
SPEAKERS
(OFF/A/B)
Press SPEAKERS (OFF/A/B)
repeatedly to select the front
speaker system you want to drive.
To select
Light up
The speakers connected to the
SPA
SPEAKERS FRONT A terminals
The speakers connected to the
SP B
SPEAKERS FRONT B terminals
To tnrn off the speaker output, press
SPEAKERS (OFF/A/B) repeatedly until the
"SPA" and "SP B" indicators on the display
do not light up.
Note
You c:mnot s_x itch the front speaker system by
pressing
SPEAKERS (OFF/A/B) when the
headphones are connected to the receiver.
m,
27us

Advertisement

Table of Contents
loading

Table of Contents