Table of Contents
Advertisement
Chapter 2 Basic Operations
Selecting a Program Source
Turntable
|
CD player
|
[
Tape deck
|
DAT or MD recorder
VCR
LD player
1
Select a program source.
Rotate the FUNCTION knob until the function
indicator you want to select lights on the display.
Phono record
PHONO
-
Radio broadcast
TUNER
TV broadcast
TV
Compact disc
CD
DAT or MD
DAT/MD
program
Video program
VIDEO 1, VIDEO 2,
VIDEO 3, LD
For taped program: Press TAPE.
The MONITOR
indicator lights.
If you select a program source using the remote, you can
turn on the power of the component as well as the
receiver.
2
Start playback of the selected program, for
example, a CD.
.
12
Selecting the Speaker System
SPEAKERS
as a Se
Sa
Sey
es
HEADPHONES
Set the SPEAKERS selector
to
If you connect and
drive
Speaker system A
Speaker system B
| B
Both speaker systems A | A+B
and B
For headphone listening: Connect headphones to the
HEADPHONES jack and set SPEAKERS to OFF.
Adjusting the Audio
MASTER VOLUME
DIRECT PASS
MUTING
BALANCE
To adjust volume
Turn MASTER VOLUME.
To mute the sound
Press MUTING.
The indicator lights up and the volume level is reduced to a
low level (— 20 dB attenuation).
Press it again to restore the previous listening level.
To adjust the balance
Adjust BALANCE
to correct stereo imaging, when the stereo
image is not symmetrical.
To reinforce the bass
Press LOW
BOOST so that the indicator lights up. Press it
again to turn off the effect (the indicator goes off).
(Recommended for low listening levels.)
To listen to the sound without sound effect
Press DIRECT PASS so that the indicator in the button lights
up.
The settings of TONE (STR-GX800ES), EQUALIZER (STR-
GX900ES), SOUND FIELD and LOW BOOST will have no
effect.
Advertisement
Table of Contents
