Table of Contents
Advertisement
Default Value Data
To transfer files to the SD memory card
1. From the Utility menu, select File Transfer PC to PBX (SD Card).
The dialog box will be displayed.
2. Select the file to upload.
A window showing the upload progress will be displayed.
While transferring files to the SD memory card, the PBX automatically renames them according
to the header information.
A message will be displayed when the transfer is complete.
3. Click OK.
7.1.1.4.
Utility-File Transfer PBX (SD Card) to PC
Copies system data files from the SD memory card installed in the PBX to the connected PC.
This option is only available at Installer level.
The files that can be downloaded from the SD memory card are as follows:
Downloading the DMSYS system data file allows you to make a backup of the configuration of the PBX.
The error data files are snapshots of the configuration of the PBX taken automatically when a major error causes a system
reset. They can be analyzed by your dealer to identify the source of a problem. If there is only one error data file, its name will be
$SYSERR. If there is more than one file, the files will be numbered in chronological order, up to a maximum of 9 files.
To transfer files to the PC
1. From the Utility menu, select File Transfer PBX (SD Card) to PC.
2. Select the file to download from the list of files on the SD memory card.
Only the files listed in the table above can be downloaded. Selecting any other file will cause an error message to be dis-
played.
3. Click Transfer.
The Save dialog box will be displayed.
4. Navigate to the folder in which you want to save the file.
5. Enter a file name.
6. Click Save.
A window showing the download progress will be displayed.
A message will be displayed when the transfer is complete.
7. Click OK.
Name on SD Memory Card
DMINI
DMIDHLC
DMISLC
DMIDLC
DMIPRI
DMICSINF
DMILCOT
DMIT1
DMIOPB3
DMIEIO
DMIIPGW1
DMIIPGW2
DMIIPGW3
DMIPRI23
DMISLCLC
DMIIPEXT
DMIVIPGW
DMIVSPGW
DMIVIPEX
DMIVSPEX
File Name
DMSYS
$SYSERR
$SYSERR1-$SYSERR9
LIC00-LIC99
Corresponding Card
IPCMPR
DHLC8
SLC8
DLC8/DLC16
PRI
CSIF
LCOT8/LCOT16
T1
OPB3
EIO
IP-GW4 (KX-TDA0480)
IP-GW4 (KX-TDA0484)
IP-GW16
PRI23
SLC16
IP-EXT16
V-IPGW16
V-SIPGW16
V-IPEXT32
V-SIPEX32
File Type
System Data
Error Data
Activation Key
41
KX-TDE600GR
Advertisement
Table of Contents
