Receiving Traffic Announcements; Ta/Tp; Presetting Rds Stations With Af And Ta; Setting - Sony MEX-5DI Operating Instructions (XT-XM1) Operating Instructions Manual

Receiving traffic
announcements

— TA/TP

By activating the Traffic Announcement (TA)
and Traffic Programme (TP), you can
automatically tune in an FM station broadcasting
traffic announcements. These settings function
regardless of the current FM programme, or
source (CD/MD, AUX). The unit switches back
to the original source when the bulletin is over.
Press (TA) repeatedly until "
appears.
The unit starts searching for traffic
information stations.
" " indicates reception of such stations.
T P
The unit will continue searching for stations
available with TP if "NO TP" appears
momentarily.
To cancel all traffic announcements, disappear
" ."
T A
To Press
(TA)
Cancel current
announcement
Tips
• You can also cancel the current announcement by
pressing (SOURCE) or (MODE).
• TA can also be set to on/off by pressing (MODE) on
the unit for 2 seconds.
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so you won't miss hearing them.
1
Press (VOL) to adjust the desired
volume level.
2
Press (TA) for 2 seconds.
"TA" appears and the setting is stored.
Receiving emergency announcements
If either AF or TA is on, the unit will switch to
emergency announcements, if one comes in
while listening to an FM station, CD/MD, or
AUX.
Presetting RDS stations with
AF and TA setting
When you preset RDS stations, the unit stores
each station's AF/TA setting (on/off) as well as
its frequency. You can select a different setting
(for AF, TA, or both) for individual preset
stations, or the same setting for all preset
stations. If you preset stations with "
on, the unit automatically stores stations with the
strongest radio signal.
"
T A
Presetting the same setting for all
preset stations
1
Select an FM band (page 24).
2
Press (AF) and/or (TA) to display
"
A F
Note that deactivating "
"
T A
as RDS stations.
3
Press (MENU).
4
Press < or , to select "Edit."
5
Press (ENTER).
6
Press M or m to select "BTM."
7
Press (ENTER).
8
Press (MENU).
The display returns to the normal display.
Presetting different settings for each
preset station
1
Select an FM band, and tune in the
desired station (page 26).
2
Press (AF) and/or (TA) to display
"
A F
3
Press the desired number button ((1)
to (6)) until "Memory" appears.
Repeat from step 1 to preset other stations.
" and/or " ."
T A
" and
A F
" applies to non-RDS stations as well
" and/or " ."
T A
" to
A F
29