Regular Safety Checks - EcoSmart AB Series Installation, Operation And Maintenance Manual

Regular Safety Checks

Like all fire and fireplace systems, it's important to run through
regular safety checks. Please take the time to familiarise yourself
(and any other users) with the safety procedures associated with
using your EcoSmart Fire.
e-nrg bioethanol is the onLy fuel suitable for use in this
appliance.
Check your burner is in good working condition, the shut off
mechanism is working smoothly, the filling point is accessible and
effective, nothing foreign has fallen into it and make sure there is
no visual or physical damage to the burner
frequently inspect all around the installation – including lifting the
burner out of its position to ensure that no fuel has accumulated
in or around the setting at any time
take out your operations manual and refresh your memory on the
operational procedures for using this product – it's available on
our website too
give your burner a good clean, they can be washed out with hot
soapy water and left to dry - or pop it in your dishwasher on the
hot pan cycle with detergent (refer to your operations manual)
Check the operation of your Jerry Can, fire extinguisher, lighter
and lighting rod to ensure you have the right tools to use for
safely operating your fire - replacement accessories are available
from your closest distributor
check your fuel supply is stored according to regulations – if you
are unsure contact your local distributor
Check that all flammable items are within safe distance from the
flame – that's a minimum of 1500mm [59.1in] at all times in all
conditions
And remember, never overfill your burner, never fill your burner
whilst it is in operation or hot, never leave a fire unguarded and
never leave children unsupervised
© Copyright 2004 - 2018 The Fire Company Pty Ltd. All rights reserved. V0318