Plug - Sony MCE-F11 Operating Instructions Manual

Setting the VOLTAGE SELECTOR
(except for China model)
Check that the VOLTAGE SELECTOR on the rear
panel of the player is set to the local power line
voltage. If not, set the selector to the correct position
using a screwdriver before connecting the AC power
cord to a wall outlet.
When you set the selector to "110 – 120 V" position, be
sure to use the supplied plug adaptor.
110 - 120 V
VOLTAGE SELECTOR
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
220 - 240 V
Getting Started
Getting Started Playing CDs
Getting Started
7 EN