Sony MCE-F11 Operating Instructions Manual page 6

Getting Started
pWhen your TV does not have audio/video inputs
Use the RFU adaptor RFU-95CH (for China model,
not supplied) or RFU-99E (except for China model,
not supplied).
VIDEO CD player
1
Set the
selector
according to
the TV
system of
your country.
RFU adaptor
(not supplied)
TV
To an AC outlet
EN
6
To RFU OUT
To an AC outlet
3
If the playback picture is
deteriorated, turn the RF
channel setting screw
slowly with a screwdriver
until the playback picture
is clearly displayed on the
TV screen.
VHF/UHF
To ANT (Antenna)
input
To Antenna input
2
Turn on the TV and select
a channel between UHF
channels (RFU-95CH:
22~26, RFU-99E: 30~39)
that is not used to
receive a TV station.
Setting the color system switch
This player conforms to the NTSC and PAL color
systems. Set the COLOR SYSTEM switch on the rear of
the player to the appropriate position, according to
your TV.
If the color system of your TV is NTSC:
Set the COLOR SYSTEM switch to NTSC. Pictures
will not be displayed if you set the switch to PAL.
When you play a VIDEO CD recorded in the PAL
color system, the picture will be stretched vertically
and will be displayed with the upper and lower
parts of the picture cut off.
If the color system of your TV is PAL:
Set the COLOR SYSTEM switch to PAL. Pictures will
not be displayed if you set the switch to NTSC.
When you play a VIDEO CD recorded in the NTSC
color system, the picture will be stretched
horizontally and will be displayed with the upper
and lower parts of the screen masked in black.
If your TV automatically changes the color system
according to the input signal:
Pictures will be displayed with the switch set to
either NTSC or PAL.
If you set the COLOR SYSTEM switch to AUTO, the
player automatically changes the color system of
video output according to the color system of the
VIDEO CD to be played. In this case, the color
system selected remains until you turn off the player,
or you play another VIDEO CD with a different color
system. If you turn off the player, the color system
will be set to NTSC automatically when you turn on
the player again.
Be sure to turn off and on the player when you change
the setting.
COLOR
SYSTEM
AUTO
NTSC PAL
,