Sony MV-700HR Service Manual
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. DVD Player
  5. MV-700HR
  6. Service manual
Sony MV-700HR Service Manual

Sony MV-700HR Service Manual

Portable dvd player
Hide thumbs Also See for MV-700HR:
Table of Contents

Advertisement

Quick Links

Download this manual
SERVICE MANUAL
Ver. 1.2 2005.08
Copyrights
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents, other intellectual
property rights owned by Macrovision
Corporation, and other rights owners. Use of
this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
•"Memory Stick,"
and "MagicGate
Memory Stick" are trademarks of Sony
Corporation.
•"Memory Stick Duo" and "
are trademarks of Sony Corporation.
•"MagicGate" and "
trademarks of Sony Corporation.
•"Memory Stick PRO" and "
are trademarks of Sony Corporation.
Manufactured under license from Dolby
Laboratories. "Dolby", "Pro Logic", and the
double-D symbol are trademarks of Dolby
Laboratories.
"DTS," "DTS Digital Surround" and "DTS
Digital Out" are trademarks of Digital Theater
Systems, Inc.
DivX is a registered trademark of
DivXNetworks, Inc.
Sony Corporation
9-879-661-03
e Vehicle Group
2005H05-1
Published by Sony Engineering Corporation
© 2005.08
System
Laser
Signal format system
Audio characteristics
Frequency response
"
Signal to noise ratio
Harmonic distortion
Dynamic range
" are
Wow and flutter
"
Radio section
Tuning range
Intermediate frequency
Usable sensitivity
Frequency response
S/N ratio
Harmonic distortion at 1 kHz
Separation
General
Outputs
Inputs
Power requirements
Dimensions
MV-700HR
Model Name Using Similar Mechanism
Optical Pick-up Block Name
SPECIFICATIONS
Mass
Operating temperature
Supplied accessories
Semiconductor laser
PAL/NTSC
20 Hz to 20 kHz
90 dB (A)
0.03%
90 dB
below measurable limits
(±0.001% W PEAK)
US, CND, E (PAL), TW,
KR, AUS, CH
FM: 87.5 - 108.0 MHz
225 kHz
20 dBf
30 - 15,000 Hz
66 dB (stereo)
66 dB (mono)
0.8% (stereo)
0.8% (mono)
30 dB at 1 kHz
Monitor
System
Audio/video output
Display
Headphones output
Drive system
Optical output
Audio/video input
Picture size
DC 12V input
Picture segment
12 V DC
Approx. 220 × 44 × 152 mm
(w/h/d)

PORTABLE DVD PLAYER

US Model
Canadian Model
AEP Model
UK Model
E Model
Australian Model
Chinese Model
NEW
SDR-085T
Approx. 1.2 kg
0˚C to 45˚C
AC power adaptor (1)
(including AC power cords
(2) (AEP, UK), (1) (except
AEP, UK))
Power cord for the cigar
lighter socket (1)
Card remote commander
RM-X707 (1)
Headrest installation kit (1)
Installation cradle (1)
Lithium battery for
memory back-up CR2032
(1)
Carrying bag (1)
Operating Instructions (1)
Audio/video cable (1)
(except AEP, UK, RU)
FM antenna (1)
(US, CND, E (PAL), TW,
KR, AUS, CH)
Rechargeable battery (1)
(US, CND, E (NTSC))
Power cable (1)
(E (PAL), TW, KR, AUS, CH)
Connection box XA-121
(E (PAL), TW, KR, AUS, CH)
Liquid crystal color display
Manual flipdown panel
TFT-LCD active matrix
system
7 inches wide screen (16:9)
336,960 (w 1440 × h 234)
dots
– Continued on next page –

Advertisement

Table of Contents
loading

Related Manuals for Sony MV-700HR

Summary of Contents for Sony MV-700HR

  • Page 1: Portable Dvd Player

    AEP, UK)) Power cord for the cigar •“Memory Stick,” and “MagicGate Audio characteristics lighter socket (1) Memory Stick” are trademarks of Sony Card remote commander Corporation. Frequency response 20 Hz to 20 kHz RM-X707 (1) •“Memory Stick Duo” and “...
  • Page 2 THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS IN SUPPLEMENTS PUBLISHED BY SONY.

  • Page 3: Table Of Contents

    MV-700HR TABLE OF CONTENTS SERVICING NOTES ..........4 GENERAL Location of Controls ............6 DISASSEMBLY 3-1. Disassembly Flow ............9 3-2. Cover (Hinge) ..............10 3-3. Front/Rear Case (Main) Section, Monitor Section ..10 3-4. Optical Pick-up Block (SDR-085T) ........ 11 3-5.

  • Page 4: Servicing Notes

    MV-700HR Ver. 1.2 SECTION 1 SERVICING NOTES MODEL IDENTIFICATION NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK OR BASE UNIT – Bottom View – The laser diode in the optical pick-up block may suffer electrostatic break-down because of the potential difference generated by the charged electrostatic load, etc.
  • Page 5 MV-700HR Notes on CD-Rs (recordable CDs)/ About the discs this player CD-RWs (rewritable CDs)/DVD-Rs (recordable DVDs)/DVD+Rs/DVD- can play RWs (rewritable DVDs)/DVD+RWs This player can play the following discs: • Some CD-Rs/CD-RWs/DVD-Rs/DVD+Rs/ •DVD Video DVD-RWs/DVD+RWs (depending on the •DVD-R/DVD+R equipment used for its recording or the •DVD-RW/DVD+RW...

  • Page 6: General

    MV-700HR SECTION 2 This section is extracted from instruction manual. GENERAL Location of controls MV-700HR 1 POWER (on/off) button To turn on/off the monitor. 2 u (play/pause) button 3 x (stop) button 4 . (previous)/> (next) buttons > > S-MENU...
  • Page 7 MV-700HR Ver. 1.2 US, Canadian, E (PAL), Taiwan, Korean, Australian, Chinese models On A/V OUTPUT connectors Attaching the headrest installation Connection You can connect a TV to the A/V OUTPUT kit to the seat connectors to output the contents being played The player can be installed behind the headrest This player is supplied in two kinds of connection method.
  • Page 8 MV-700HR Ver. 1.1 AEP, UK, Russian, E (NTSC) models On A/V OUTPUT connectors Attaching the headrest installation Connection You can connect a TV to the A/V OUTPUT kit to the seat connectors to output the contents being played The player can be installed behind the headrest This player is supplied in two kinds of connection method.

  • Page 9: Disassembly

    MV-700HR SECTION 3 DISASSEMBLY • This set can be disassembled in the order shown below. 3-1. DISASSEMBLY FLOW 3-2. COVER (HINGE) (Page 10) 3-3. FRONT/REAR CASE (MAIN) SECTION, MONITOR SECTION (Page 10) 3-4. OPTICAL PICK-UP BLOCK 3-6. REAR CASE (LCD) SECTION...

  • Page 10: Cover (Hinge)

    MV-700HR Note: Follow the disassembly procedure in the numerical order given. 3-2. COVER (HINGE) 1 screw 3 cover (hinge) (B 2 × 3) 1 screw (B 2 × 3) 2 two claws 3 cover (hinge) 2 two claws 3-3. FRONT/REAR CASE (MAIN) SECTION, MONITOR SECTION 7 monitor section 4 Open the monitor section.

  • Page 11: Optical Pick-Up Block (Sdr-085T)

    MV-700HR 3-4. OPTICAL PICK-UP BLOCK (SDR-085T) 4 optical pick-up block (SDR-085T) 1 FFC 13P (CN104) 3 OP flexible board (CN103) 3-5. MEMORY STICK CONNECTOR, MAIN BOARD q; bracket (detach) 7 seven screws (BTP 2 × 6) 6 Remove the solder of antenna lead wire.

  • Page 12: Rear Case (Lcd) Section

    MV-700HR 3-6. REAR CASE (LCD) SECTION 1 two screws (B P-TITE M2) 6 rear case (LCD) section 1 five screws (B P-TITE M2) 1 two screws (B P-TITE M2) 5 hinge (R) assy 7 front case (LCD) section 4 terminal 3 two screws (B 2 ×...

  • Page 13: Liquid Crystal Display Panel (Lcd900)

    MV-700HR 3-8. LIQUID CRYSTAL DISPLAY PANEL (LCD900) 2 retainer (LCD) 1 screw (BTP 2 × 6) 3 cushion (LCD) 4 liquid crystal display panel (LCD900)

  • Page 14: Test Mode

    [RESET] button. 3. The set is enter the test mode and display as bellow figure. 6. SOFT RESET (EXIT) Releasing the test mode. Display MV-700HR TEST MODE MENU 1. NTSC/PAL SELECT 2. FOR FACTORY 3. LCD SETTING 4. HEAT PROTECTION 5.

  • Page 15: Electrical Adjustments

    MV-700HR SECTION 5 ELECTRICAL ADJUSTMENTS MAIN SECTION 1. DC/DC CONVERTER ADJUSTMENT 1-1. Frequency Adjustment Setting: oscilloscope frequency counter MAIN board TP1955 TP1938 (GND) – Procedure: 1. Connect an oscilloscope or frequency counter to the TP1955 and TP1938 (GND) on the MAIN board.
  • Page 16 MV-700HR 3. INVERTER FREQUENCY CHECK MONITOR SECTION Setting: frequency counter 1. PLL ADJUSTMENT 1-1. PLL Voltage Adjustment MONITOR board Setting: TP434 digital voltmeter TP388 (GND) – MONITOR board Procedure: TP802 1. Connect a frequency counter to the TP434 and TP388 (GND) TP929 (GND) –...
  • Page 17 MV-700HR 7. IR TRANSMITTER CHECK 1 Contrast Level of Luminance Signal Setting: Setting: oscilloscope AF oscillator MONITOR board MONITOR board TP907 TP501 (L), TP502 (R) TP929 (GND) – TP505 (GND) 400 Hz, –20 dB Procedure: frequency counter 1. Connect an oscilloscope to the TP907 and TP929 (GND) on the MONITOR board.
  • Page 18 MV-700HR 8 Gamma 1 qa Vertical Position Procedure: Procedure: 1. In the “7 B-ch Sub Contrast” status, connect the oscilloscope 1. In the “q; VCO Free Run” status, input the monoscope signal to the TP907 and TP929 (GND) on the MONITOR board.

  • Page 19: Diagrams

    MV-700HR SECTION 6 DIAGRAMS 6-1. BLOCK DIAGRAM – DVD Section – DVDRFIP CVBS (Page 21) YUV3/CVBS 198 D/A CONVERTER IC301 ASDATA0 217 DIFFERENTIAL LOUT 7 DVD-L ACLK 215 SCKI (Page 20) DVDA VCOM 10 ABCK 214 BCKIN IC302 DVDB ALRCK 213...

  • Page 20: Block Diagram - Audio Section

    MV-700HR Ver. 1.2 6-2. BLOCK DIAGRAM – AUDIO Section – AV OUT VIDEO (Page 21) J1003 A/V OUTPUT R-CH MUTING SPDIF Q1101 (Page 19) R-CH J1001 CN1003 (1/3) D501, 502 IR TRANSMITTER LED DRIVE (CRADLE) HEADPHONES (IR TRANSMITTER) MODULATOR Q501...

  • Page 21: Block Diagram - Video Section

    MV-700HR 6-3. BLOCK DIAGRAM – VIDEO Section – LIQUID CRYSTAL DISPLAY MODULE RV851 LCD900 (1/2) PAL/NTSC SWITCH V-COM X701 X702 TRAP Q703, 704 V-COM AMP V-COM BIAS 3.58MHz 4.43MHz VCOM VGON 17V VGON +17V IC851 Q851 – 855 VIDEO INPUT VCOM VDD 3.3V...

  • Page 22: Block Diagram - Power Supply Section

    MV-700HR Ver. 1.2 6-4. BLOCK DIAGRAM – POWER SUPPLY Section – LCD BACK LIGHT INVERTER CONTROL • Abbreviation TRANSFORMER IC601 T1033 AUS: Australian model LIQUID CRYSTAL CH : Chinese model 8 OUTL BATT DISPLAY MODULE 13 OUTR BATT CND: Canadian model...
  • Page 23 MV-700HR Ver. 1.2 • Note for Printed Wiring Boards and Schematic Diagrams Note on Printed Wiring Boards: Note on Schematic Diagram: • X : parts extracted from the component side. • All capacitors are in µF unless otherwise noted. (p: pF) •...

  • Page 24: Printed Wiring Board - Main Section (1/2)

    MV-700HR Ver. 1.2 6-5. PRINTED WIRING BOARD – MAIN Section (1/2) – : Uses unleaded solder. • Semiconductor Location Ref. No. Location D1005 C-10 D1006 C-10 D1008 MAIN BOARD (COMPONENT SIDE) D1011 D-10 D1012 E-11 US, CND, E (PAL) ,...

  • Page 25: Printed Wiring Board - Main Section (2/2)

    MV-700HR Ver. 1.2 6-6. PRINTED WIRING BOARD – MAIN Section (2/2) – : Uses unleaded solder. • Semiconductor Location Ref. No. Location MAIN BOARD D171 I-12 (CONDUCTOR SIDE) D172 J-12 D173 J-12 JR1010 D174 J-12 D331 D-10 C1348 L1102 D1002...

  • Page 26: Schematic Diagram - Main Section (1/4)

    MV-700HR Ver. 1.2 • See page 36 for Waveforms. • See page 37 for IC Block Diagrams. 6-7. SCHEMATIC DIAGRAM – MAIN Section (1/4) – (Page 27) (Page 27) (1/4) FL331 Q331 2SC4801 R340 R349 INVERTER R337 CN103 FL228 R350 1.8V...

  • Page 27: Schematic Diagram - Main Section (2/4)

    MV-700HR • See page 36 for Waveforms. • See page 45 for IC Pin Function Description. 6-8. SCHEMATIC DIAGRAM – MAIN Section (2/4) – (2/4) FL165 FL164 C165 C167 C168 C164 100 10V FL227 DVD 3.3V C143 C227 (Page 29)

  • Page 28: Schematic Diagram - Main Section (3/4)

    MV-700HR Ver. 1.2 • See page 36 for Waveforms. • See page 37 for IC Block Diagrams. 6-9. SCHEMATIC DIAGRAM – MAIN Section (3/4) – R1911 (3/4) C1915 C1916 0.001 FB1311 IC1352 BA3121F-T1 FB1110 J1001 R1220 C1212 L1301 R1345 FB1210...

  • Page 29: Schematic Diagram - Main Section (4/4)

    MV-700HR Ver. 1.2 • See page 36 for Waveforms. • See page 37 for IC Block Diagrams. 6-10. SCHEMATIC DIAGRAM – MAIN Section (4/4) – (Page 28) (4/4) (Page 28) Q1006 Q1014,1015 BATTERY DETECT (Page 28) L1551 VOLTAGE CHECK 47µH...

  • Page 30: Printed Wiring Board - Monitor Section (1/2)

    MV-700HR 6-11. PRINTED WIRING BOARD – MONITOR Section (1/2) – : Uses unleaded solder. MONITOR BOARD (COMPONENT SIDE) (SHIELD CASE) 1-866-636- (11) MV-700HR...

  • Page 31: Printed Wiring Boards - Monitor Section (2/2)

    MV-700HR 6-12. PRINTED WIRING BOARDS – MONITOR Section (2/2) – : Uses unleaded solder. (CHASSIS) (CHASSIS) D5, S412 POWER VOLUME + VOLUME – S-MENU > MONITOR BOARD (CONDUCTOR SIDE) S403 S402 S401 S409 S408 S407 S406 S412 S401 – 404...

  • Page 32: Schematic Diagram - Monitor Section (1/4)

    MV-700HR • See page 36 for Waveforms. • See page 37 for IC Block Diagrams. • See page 45 for IC Pin Function Description. 6-13. SCHEMATIC DIAGRAM – MONITOR Section (1/4) – (1/4) Q705,706 Q705 R721 SYNC LOCK 2SC4081 R720...

  • Page 33: Schematic Diagram - Monitor Section (2/4)

    MV-700HR Ver. 1.2 • See page 36 for Waveforms. • See page 37 for IC Block Diagrams. • See page 45 for IC Pin Function Description. 6-14. SCHEMATIC DIAGRAM – MONITOR Section (2/4) – TFTON R601 (2/4) R602 Q601 2SC4081...

  • Page 34: Schematic Diagram - Monitor Section (3/4)

    MV-700HR • See page 36 for Waveforms. • See page 45 for IC Pin Function Description. 6-15. SCHEMATIC DIAGRAM – MONITOR Section (3/4) – C819 L805 10µH R848 (3/4) C814 R842 560p C813 Q802,803 0.015 PLL ON SWICH Q803 R841...

  • Page 35: Schematic Diagram - Monitor Section (4/4)

    MV-700HR Ver. 1.2 • See page 36 for Waveforms. • See page 37 for IC Block Diagrams. 6-16. SCHEMATIC DIAGRAM – MONITOR Section (4/4) – (Page 34) (4/4) Q503 2SD2657KT146 R514 D501,502 1.5k C502 (IR TRANSMITTER) (L-CH) Q407,503 C501 B+ SWTICH...
  • Page 36 MV-700HR • Waveforms – MAIN Board – – MONITOR Board – IC301 1 (BCKIN) IC1001 7 (OUT1), q; (OUT2) IC701 ts (YIN), IC701 yf (VXO-PAL) IC851 7 (OUT2) td (CTRAPOUT), tj (CIN) (PAL mode) (Color bar input) 12 Vp-p 4.4 Vp-p 2.9 Vp-p...
  • Page 37 MV-700HR • IC Block Diagrams – MAIN Board – IC103 BR24L16F-WE2 1kbit EEPROM ARRAY 7bit ADDRESS SLAVE/ WORD DATA DECODER ADDRESS REGISTER REGISTER CONTROL CIRCUIT HIGH-VOLTAGE POWER SUPPLY GENERATOR VOLTAGE DETECTOR IC104 MBM29LV160BE70TN-FS1 A15 1 A14 2 A13 3 TIMER FOR...
  • Page 38 MV-700HR IC105 A2V64S40DTP-G75-T 53 52 51 50 49 48 47 46 45 44 43 34 33 32 31 30 29 MEMORY ARRAY CLOCK BUFFER BANK #0 MEMORY ARRAY BANK #1 ADDRESS I/O BUFFER CONTROL CIRCUIT BUFFER MEMORY ARRAY BANK #2...
  • Page 39 MV-700HR IC351 AN41204A GND 1 VMSP1 POWER POWER FEED FEED 3-PHASE BRIDGE BACK BACK SFG 2 UPPER LOWER FG 3 HALL GENERATOR PRE-DRIVE PRE-DRIVE BIAS EC 4 ABSOLUTE VALUE ECR 5 PRE-DRIVE PRE-DRIVE DISTRIBUTION HALL AMP CIRCUIT MATRIX SAWTOOTH LOGIC...
  • Page 40 MV-700HR IC1101, 1201 TPA2005D1ZQYR IC1352 BA3121F OUT1 OUT2 BIAS SHUTDOWN 1 CIRCUIT INTERNAL OSCILLATOR NC 2 IN+ 3 BRIDGE – VO– IN– 4 IC1401 BD3872FS LOUD LOUD SPEAKER SPEAKER EQUALIZER1 EQUALIZER2 LOGIC TREBLE1 BASS1 fo = 10 kHz fo = 80 Hz...
  • Page 41 MV-700HR IC1901 NJM2387DL2-TE1 IC1902 BA33BC0WFP-E2 REGULATOR VREF – DRIVER OVER VOLTAGE OVER CURRENT PROTECTION PROTECTION BANDGAP REFERENCE THERMAL THERMAL OVER CURRENT ON/OFF PROTECTION SHUT DOWN PROTECT CONTROL – MONITOR Board – IC403 BR24L02F-WE2 1kbit EEPROM ARRAY 7bit ADDRESS SLAVE/ WORD...
  • Page 42 MV-700HR IC501 TA2061AF-EL LEVEL REFERENCE DETECT VOLTAGE PRE- BUFFER EMPHASIS – PRE- BUFFER EMPHASIS LEVEL MIX AMP O. S. M. DETECT IC601 MP1015EF-LF-Z IC631 TK11233CMCL-G AGND FEED BACK ISFB CONTROL VLFB BLOCK BRIGHTNESS ABRT 1 VOLTAGE COMP CONTROL CONTROL IL 2...
  • Page 43 MV-700HR IC701 AN2546FH-AV LOGIC IIC BUS SYNC REGULATOR LOGIC LOGIC SEPARATOR RST 49 LOGIC V SYNC PHASE HHKILL F DET DROP COMP COM DC 50 VCC3 VERTICAL VCOM COMMON OUT COUNT DAC-OUT 51 R-CH AVE DET – SYNC Y-IN 52...
  • Page 44 MV-700HR IC751 µPD6467GR-546-E1 DISPLAY CONTROL 20 VSYNC DATA REGISTER DATA 19 HSYNC BACK GROUND CONTROL DATA REGISTER 18 VB OUTPUT INSTRUCTION 17 VG DATA INPUT DATA CMDCT SHIFT 1bit x 336 word REGISTER 16 VR REVERSE DATA 15 VBLK 1bit x 336 word...
  • Page 45 MV-700HR • IC Pin Function Description MAIN BOARD IC101 CXD9804R (RF AMP, SERVO DSP, MPEG DECODER) Pin No. Pin Name Description AGND Ground terminal DVDA AC coupled input path A DVDB AC coupled input path B DVDC AC coupled input path C...
  • Page 46 MV-700HR Pin No. Pin Name Description Serial data output terminal Not used Disc lid open/close detect switches input terminal STBY Standby signal output to the coil/motor driver Chip select signal output terminal Not used DVDD18 Power supply terminal (+1.8V) 53 to 59...
  • Page 47 MV-700HR Pin No. Pin Name Description DQM0 Data mask signal output to the SD-RAM DVD/CD DVD/CD switch signal output terminal Two-way data bus with the SD-RAM DVSS Ground terminal 117, 118 RD6, RD5 Two-way data bus with the SD-RAM DVSS...
  • Page 48 MV-700HR Pin No. Pin Name Description DVSS Ground terminal MS_SDIO Two-way data bus with a memory stick MS_BS Bus state signal output to a memory stick Serial data input from the system controller Serial data transfer clock signal input from the system controller...
  • Page 49 MV-700HR Pin No. Pin Name Description RFVDD18 Power supply terminal (+1.8V) XTALO System clock output terminal (27 MHz) XTALI System clock input terminal (27 MHz) JITFO Output terminal of the RF jitter meter JITFN Input terminal of the RF jitter meter...
  • Page 50 MV-700HR MONITOR BOARD IC401 µPD780024AGK-C85-9ET-A (SYSTEM CONTROLLER) Pin No. Pin Name Description TEST Test mode setting terminal "H": test mode when power on, normally fixed at "L" Power on/off control signal output for main power and LED drive signal output PW-ON "H": power on, LED on...
  • Page 51 MV-700HR Pin No. Pin Name Description REM_HALT Wake up signal input from the remote commander PW_IN Low-voltage detection signal input terminal REM_IN Remote control signal input terminal ACC CHECK Accessory power check input terminal from the cradle DV_MUTE Muting on/off control signal output terminal Not used...
  • Page 52 MV-700HR MONITOR BOARD IC751 µPD6467GR-546-E1 (OSD DRIVER) Pin No. Pin Name Description SCLK Serial data transfer clock signal input from the system controller Chip select signal input from the system controller DATA Serial data input from the system controller Clear signal input after the power supply rises Power supply terminal (+3.3V)
  • Page 53 MV-700HR MONITOR BOARD IC801 MN5814 (LCD CONTROLLER) Pin No. Pin Name Description SYNCIN Composite sync signal input terminal Not used HSYNCIN Horizontal sync signal input from the RGB decoder CPHSEL(SIDE2), 3, 4 Screen size selection signal input from the system controller...

  • Page 54: Exploded Views

    MV-700HR Ver. 1.2 SECTION 7 EXPLODED VIEWS NOTE: • -XX and -X mean standardized parts, so they • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are may have some difference from the original are seldom required for routine service.

  • Page 55: Rear Case (Lcd) Section

    MV-700HR 7-2. REAR CASE (LCD) SECTION not supplied BATT101 not supplied front case (LCD) section Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-2055-330-1 HINGE (L) ASSY 3-250-543-81 SCREW (+B P-TITE M2) (for SILVER) X-2025-515-1 CASE (LCD) ASSY, REAR (SILVER)

  • Page 56: Front Case (Lcd) Section

    MV-700HR Ver. 1.2 7-3. FRONT CASE (LCD) SECTION MONITOR board not supplied not supplied D503 D504 D501 D502 LCD900 not supplied not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-548-082-01 SPRING (LOCK) A-1111-882-A MONITOR BOARD, COMPLETE (US, CND)

  • Page 57: Front Case (Main) Section

    MV-700HR Ver. 1.2 7-4. FRONT CASE (MAIN) SECTION not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark 2-548-100-01 PLATE (LIFT) (for SILVER) X-2025-518-1 BRACKET (DAMPER) ASSY 2-548-100-11 PLATE (LIFT) (for BLACK) 2-630-573-01 CUSHION (LIFT) (for SILVER)

  • Page 58: Rear Case (Main) Section

    MV-700HR Ver. 1.2 7-5. REAR CASE (MAIN) SECTION not supplied (including sled motor, spindle motor) not supplied (spindle motor) not supplied (sled motor) (EXCEPT E (NTSC)) not supplied Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark...

  • Page 59: Connection Box Section (Xa-121)

    MV-700HR Ver. 1.2 7-6. CONNECTION BOX SECTION (XA-121) (E (PAL), TW, KR, AUS, CH) (E (PAL), TW, KR, AUS, CH) not supplied (E (PAL), TW, KR, AUS, CH) not supplied not supplied not supplied (E (PAL), TW, AUS) (E (PAL), TW, KR, AUS, CH) not supplied Ref.

  • Page 60: Electrical Parts List

    MV-700HR Ver. 1.2 SECTION 8 CONTROL MAIN ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • Items marked “*” are not stocked since they The components identified by mark 0 or dotted line with mark 0 are parts list may be different from the parts are seldom required for routine service.
  • Page 61 MV-700HR Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C150 1-165-908-11 CERAMIC CHIP C227 1-117-681-11 ELECT CHIP 100uF C302 1-162-970-11 CERAMIC CHIP 0.01uF C151 1-107-826-11 CERAMIC CHIP 0.1uF C303 1-137-910-11 TANTALUM CHIP 10uF...
  • Page 62 MV-700HR Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1030 1-127-573-11 CERAMIC CHIP C1226 1-100-742-91 CERAMIC CHIP 2.2uF C1032 1-162-970-11 CERAMIC CHIP 0.01uF C1229 1-127-820-11 CERAMIC CHIP 4.7uF C1033 1-127-573-11 CERAMIC CHIP (US, CND, E (PAL), TW, KR, AUS, CH)
  • Page 63 MV-700HR Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C1913 1-162-970-11 CERAMIC CHIP 0.01uF D1011 8-719-421-79 DIODE MA8043-L C1914 1-165-908-11 CERAMIC CHIP C1915 1-137-910-11 TANTALUM CHIP 10uF D1012 8-719-988-61 DIODE 1SS355TE-17 D1013 8-719-988-61 DIODE 1SS355TE-17...
  • Page 64 MV-700HR Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark FB1161 1-400-244-11 BEAD, FERRITE (CHIP) (1608) IC1002 6-707-617-01 IC R1154H001C-FB FB1201 1-414-594-11 INDUCTOR, FERRITE BEAD IC1101 6-704-583-01 IC TPA2005D1ZQYR IC1201 6-704-583-01 IC TPA2005D1ZQYR FB1202 1-216-864-11 SHORT CHIP...
  • Page 65 MV-700HR Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark L1701 1-412-963-11 INDUCTOR 100uH L1901 1-216-864-11 SHORT CHIP R116 1-400-244-11 BEAD, FERRITE (CHIP) (1608) (US, CND, E (PAL), TW, KR, AUS, CH) R118 1-400-244-11 BEAD, FERRITE (CHIP) (1608)
  • Page 66 MV-700HR Ver. 1.2 MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R355 1-216-835-11 METAL CHIP 1/10W R356 1-216-835-11 METAL CHIP 1/10W R1033 1-218-869-11 METAL CHIP 8.2K 0.5% 1/10W R357 1-216-823-11 METAL CHIP 1.5K 1/10W R1034 1-218-857-11 METAL CHIP 2.7K...
  • Page 67 MV-700HR Ver. 1.2 MAIN MONITOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R1222 1-216-821-11 METAL CHIP 1/10W R1710 1-218-285-11 METAL CHIP 1/10W R1223 1-216-843-11 METAL CHIP 1/10W R1224 1-216-821-11 METAL CHIP 1/10W R1910 1-216-797-11 METAL CHIP...
  • Page 68 MV-700HR MONITOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C404 1-162-964-11 CERAMIC CHIP 0.001uF C640 1-162-964-11 CERAMIC CHIP 0.001uF C405 1-162-918-11 CERAMIC CHIP 18PF C701 1-100-352-11 CERAMIC CHIP C702 1-127-715-11 CERAMIC CHIP 0.22uF C406 1-162-918-11 CERAMIC CHIP...
  • Page 69 MV-700HR MONITOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark C801 1-104-851-11 TANTALUM CHIP 10uF D402 8-719-069-55 DIODE UDZSTE-175.6B C802 1-162-964-11 CERAMIC CHIP 0.001uF D403 8-719-069-55 DIODE UDZSTE-175.6B D404 8-719-069-55 DIODE UDZSTE-175.6B C803 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 70 MV-700HR MONITOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark Q853 8-729-905-35 TRANSISTOR 2SC4081-R IC601 6-707-943-01 IC MP1015EF-LF-Z Q854 8-729-026-52 TRANSISTOR 2SA1576A-T106-R IC631 6-704-470-01 IC TK11233CMCL-G IC632 6-705-338-01 IC TK11250CMCL-G Q855 6-550-139-01 TRANSISTOR IMZ1A-T108 IC701 6-704-269-01 IC AN2546FH-AV...
  • Page 71 MV-700HR Ver. 1.2 MONITOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R452 1-216-809-11 METAL CHIP 1/10W R453 1-216-809-11 METAL CHIP 1/10W R616 1-216-821-11 METAL CHIP 1/10W R454 1-216-809-11 METAL CHIP 1/10W R617 1-216-829-11 METAL CHIP 4.7K...
  • Page 72 MV-700HR Ver. 1.2 MONITOR Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark R810 1-216-821-11 METAL CHIP 1/10W R811 1-216-821-11 METAL CHIP 1/10W R923 1-216-864-11 SHORT CHIP R812 1-216-821-11 METAL CHIP 1/10W < VARIABLE RESISTOR > R813...
  • Page 73 MV-700HR Ver. 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark A-1111-889-A CRADLE ASSY (E (PAL), TW, KR, AUS, CH) 1-830-568-21 CORD, CONNECTION (CIGAR) (E (PAL), TW, KR, AUS, CH) 1-469-241-11 CORE, FERRITE (RFC-8 BK) (E (PAL), TW, KR, AUS, CH)
  • Page 74 MV-700HR Ver. 1.2 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark (US, CND, AEP, UK, RU, E (NTSC)) PARTS FOR INSTALLATION AND CONNECTIONS (US, CND) (US, CND, AEP, UK, RU, E (NTSC)) *************************************** A-1121-886-A CRADLE ASSY...
  • Page 75 MV-700HR Ver. 1.2 Ref. No. Part No. Description Remark (E (PAL), KR, TW, AUS, CH) Ref. No. Part No. Description Remark PARTS FOR INSTALLATION AND CONNECTIONS (E (PAL, KR, TW, AUS, CH) *************************************** not supplied A-1111-889-A CRADLE ASSY X-2022-450-1 WIRE (ANTENNA) ASSY...

  • Page 76: Revision History

    MV-700HR REVISION HISTORY Clicking the version allows you to jump to the revised page. Also, clicking the version at the upper right on the revised page allows you to jump to the next revised page. Ver. Date Description of Revision 2005.04...

Table of Contents