Table of Contents
Advertisement
CHAPTER
2
NOTE
Unpacking
CAUTION
Damaged items
Physical placement
UNPACKING & ASSEMBLY
The TE-1500 system is ordinarily shipped in 2 boxes. Please check the
packing list to make sure that all items have been received. The bath unit
housing is shipped completely assembled with the exception of the
Overflow Jar, tubing, and connecting cables.
Retain all packing materials until the TE-1500 is connected and function-
ing properly. If any component must be returned to CANNON
ment Company, it should be packed in its original shipping container.
Some TE-1500 components are quite heavy. To avoid injury, obtain
necessary assistance when lifting and moving shipping cartons and
heavier unpacked components.
Remove all components from their shipping cartons.
Remove any and all packing materials included to prevent shipping
damage (styrofoam, etc.) from the components.
Inspect all components for damage. Report any damage to the
shipper and to CANNON
Retain all packing materials until the instrument is connected and func-
tioning properly. If any component(s) must be returned to
CANNON
®
Instrument Company, the damaged item(s) should be pack-
aged in the original shipping container. Refer to the final chapter of this
manual for instructions on returning defective equipment. Customers
outside the United States should contact the local CANNON
procedures on returning products to CANNON
Before beginning assembly, please verify that all components listed on
the packing slip are present.
The TE-1500 should be located on a stable, nonflammable laboratory
bench or tabletop in a position permitting convenient access to the front
and rear of the unit. The bath requires adequate ventilation for the
integral cooling fans, so a space of at least eight inches should be pro-
vided between the rear and both sides of the TE-1500 and any wall or
other obstruction. A clearance area on the right side of the unit is neces-
sary to allow access to the rear pump switch. An electrical service
MAINS power outlet matching the electrical specifications on the label
on the TE-1500 rear panel must be located within nine feet of the unit.
®
TE-1500 Thermoelectric Constant Temperature Bath
CANNON
Revision 1.1b—January, 2007; CANNON
2139 High Tech Road • State College, PA 16803 • USA
®
Instrument Company immediately.
®
.
®
Instrument Company
7
®
Instru-
®
agent for
Advertisement
Table of Contents
