Damaged Items; Assembly Procedure; Figure 4: Unpacked Primary Bath Components; Figure 5: Detaching Top Cover Figure 6: Remove Screws From Top Covers - Cannon CT-2000 Instruction & Operation Manual

4. Inspect each component for signs of damage. Report any damages to the shipper and to Cannon
Instrument Company immediately.

Damaged Items

Retain all packing materials until the instrument is connected and functioning properly. If any
component(s) must be returned to CANNON, the damaged item(s) should be packaged in the
original shipping container. Refer to the Warranty section of this manual for instructions on
returning defective equipment. Customers outside the United States should contact their local
CANNON agent for procedures on returning products to Cannon Instrument Company.

Assembly Procedure

1. Unpack the bath unit housing and move it to its permanent location on a stable laboratory
bench or table.
2. Remove the eight screws from the stainless steel top covers. Refer to Figure 5 and Figure 6.
Figure 5: Detaching Top Cover

Figure 4: Unpacked Primary Bath Components

CANNON Instrument Company | Unpack & Assemble
Figure 6: Remove Screws from Top Covers
Remove all screws
9