Unpacking And Assembly; Unpacking The Ct-500 - Cannon CT-500 Manual

CHAPTER
2

Unpacking the CT-500

CAUTION
Damaged items
CANNON CANNON CANNON
CANNON CANNON

UNPACKING AND ASSEMBLY

Some CT-500 components, including the glass jar and the primary
instrument housing, are quite heavy. It is recommended that two people
carry the shipping cartons and the heavier unpacked components.
When lifting the CT-500 bath, do not grasp the handles of the electrical
drawer. Drawer handles are not designed to bear the weight of the
instrument.
1. Remove all components from the shipping container(s).
2. Remove any and all packing materials (styrofoam, etc.) from the
components.
3. Verify reception of shipped materials by comparing equipment items
with packing/parts list(s). Report missing items to CANNON
Instrument Company immediately.
4. Inspect each component for signs of damage. Report damages to the
shipper and CANNON
Retain all packing materials until the instrument is connected and
functioning properly. If any component(s) must be returned to
CANNON ®
Instrument Company, the damaged item(s) should be pack-
aged in the original shipping container. Refer to the final chapter of this
manual for instructions on returning defective equipment. Customers
outside the United States should contact the local CANNON
procedures on returning products to CANNON
Figure 2: CT-500 primary components
® CT-500/600 Series II CONSTANT TEMPERATURE BATH
Version 3..3—March, 2012; CANNON CANNON CANNON CANNON CANNON
2139 High Tech Road • State College, PA • 16803 • USA
®
Instrument Company immediately.
®
.
® Instrument Company
5
®
®
agent for