Table of Contents
Advertisement
CHAPTER
3
Setting the temperature
Front Panel Description
Start-up Procedure
The controls for the TE-1500 are divided into 4 different "control areas",
as shown on the front panel (see Figure 7). In this manual, the four
control areas will be abbreviated as follows:
Front Panel Control Areas
CONTROL AREA
POWER
TEMPERATURE
TEMPERATURE ADJUST
HEAT
Figure 7: TE-1500 front panel
1. Verify that the TE-1500 has been assembled and installed correctly.
2. Turn the bath POWER switch on. The green lamp above the POWER
switch should illuminate, indicating the thermostat is functioning. The
green lamp in the switch indicates active "mains" power.
®
TE-1500 Thermoelectric Constant Temperature Bath
CANNON
Revision 1.1b—January, 2007; CANNON
2139 High Tech Road • State College, PA 16803 • USA
BATH OPERATION
ABBREVIATION
P
T
TA
H
®
Instrument Company
15
Advertisement
Table of Contents
