Download Print this page

Aiwa CX-NMT90 Operating Instructions Manual: Setting The Sleep Timer

Compact disc stereo system.
Hide thumbs

Advertisement

5
6
The duration for the timer-activated
period can be set between
5 and 240 minutes
in 5-minute
steps.
* If this step is not completed
within 4 seconds,
repeat from
step 1.
Prepare the source.
To listen to a CD,
load the disc to be played first on tray 1.
To listen to a tape,
insert the tape into deck 1 or 2.
To listen to the radio,
tune in to a station.
Press the POWER button to turn the unit off after
adjusting the volume and tone.
O
remains
on the display
after the power is turned
off (timer
standby
mode),
When
the timer-on
time
is reached,
the unit turns
on and
begins
play with the selected
source.
The volume
level is automatically
set to 16 when the power
is turned off with the volume
level set to 17 or more.
To check the specified time and source
Press the TIMER
button. The timer-on
time, the selected
source
name and the duration for the timer-activated
period are displayed
for 4 seconds.
To cancel timer standby mode temporarily
Press
the TIMER
button
repeatedly
so that
0
or Q)REC
disappears
on the display.
To restore the timer standby
mode, press again to display
@ or
@ REC.
Using the unit while the timer is set
You can use the unit normally
after setting the timer,
Before turning off the power, repeat step 5 to prepare the source,
and adjust the volume
and tone.
EEn3
Timer playback
and timer
recording
will not begin unless
the
power is turned off,
Connected
equipment
cannot be turned on and off by the built-
in timer of this unit,
Use an external
timer,
TIMER RECORDING
Timer recording
is applicable
for TUNER
and VIDEO/AUX
(with
an external
timer) sources
only.
Press the TIMER button repeatedly until @)REC appears on
the display, and press the II SET button within 4 seconds.
Carry out the steps of "SETTING
THE TIMER
from step 2 and
SETTING THE SLEEP TIMER
The unit can be turned
off automatically
at a specified
time
Use the remote control.
1
Press the SLEEP button.
2 Within 4 seconds,
press the <+
or FF
t.yutton
to specify the time" until the power is turned oflf.
Each time the button is pressed,
the time changes
betvveen 5
and 240 minutes
in 5-minute
steps.
m
Specified
time
To check the time remaining until the power is turned off
Press the SLEEP
button once.
The remaining
time is displayed
for 4 seconds.
To cancel the sleep timer
Press the SLEEP
button
twice so that "SLEEP"
on the clisplay
disappears.
insert the tape to be recorded
into deck 2 after step 5.
ENGLISH
22

Advertisement

   Related Manuals for Aiwa CX-NMT90

This manual also for:

Nsx-mt90

Comments to this Manuals

Symbols: 0
Latest comments: