Download Print this page

Aiwa CX-NMT90 Operating Instructions Manual: Play With Dolby Pro Logic

Compact disc stereo system.
Hide thumbs

Advertisement

PLAY WITH DOLBY PRO LOGIC
DOLBY
PRO LOGIC
-—.
LF
-a
DOLBY
PRO LOGIC
1 Press the VIDEO/AUX
button and start playback
of the video source.
2 Press the DOLBY PRO LOGIC button.
NORMAL
is selected,
and the playback sound has the DOLBY
PRO LOGIC effect.
To
cancel Dolby Pro Logic mode
Press the DOLBY
PRO LOGIC button repeatedly
until P-OFF is
displayed.
To change the sound levels during playback
After adjusting the balance with
the noise sequencer,
the sound
levels of the center or surround
speakers
can be adjusted
during
playback
of laser discs or video software,
1
Press the MANUAL
SELECT
(TEST)
button
on the remote
control
repeatedly
to select
"CEN"
(center)
or '(SUR"
(surround).
2
While the "CEN" or "SUR" is displayed,
press the DOWN 1<<
or UP
Ebl
button on the remote control to adjust the volume.
ADDITIONAL
DOLBY PRO LOGIC MODES
[n addition
to the NORMAL
mode, this unit is also equipped
with
the PHANTOM
and the 3 CH LOGIC modes.
PHANTOM mode: Use this mode when no center speaker is
connected.
The center channel
signals
are output through
the
left and right speakers.
3
CH LOGIC
mode: Use this mode when no surround
speakers
are connected.
This mode reproduces
rear sounds through
the
front speakers.
To select PHANTOM or 3 CH LOGIC
Press the DOLBY PRO LOGIC button repeatedly
until the desired
Dolby Pro Logic mode is displayed.
The Dolby Pro Logic mode
is displayed
cyclically
as follows.
~
NORMAL
-
PHANTOM+
3 CH LOGIC
1
To adjust the balance of connected speaker sound levels
Carry out steps 2 to 4 on page 17.
EXE!
Depending
on the sound source and/or listening
conditions,
a
surround
effect may not be obtained
even when the DOLBY
PRO LOGIC is on.
The full DOLBY
PRO LOGIC effect cannot
be obtained
when
using software
without
IX
IDOLHYSURROUNDI
mark.
In this case, use
the SURROUND
system
instead.
(See page 7.)
ENGLISH
18

Advertisement

Chapters

   Related Manuals for Aiwa CX-NMT90

This manual also for:

Nsx-mt90

Comments to this Manuals

Symbols: 0
Latest comments: