Software Description - ST STM32 Nucleo Application Note

AN4594
The X-CUBE-MEMS1 firmware and related documentation is available on st.com at
http://www.st.com/x-nucleo.
2.2

Software description

The following software components are required to set up a suitable development
environment for creating applications based on the sensor expansion board:
•
STM32Cube environment and related firmware for the STM32Nucleo and sensor
expansion board
•
Development tool chain and compiler: IAR embedded workbench IDE is the
development environment used for the applications described in this document.
Figure 2. X-NUCLEO-IKS01A1 sensor expansion board
Figure 3. Sensor expansion board connected to STM32 Nucleo board
DocID026958 Rev 1
Getting started
5/16
16