Telit Wireless Solutions HE863 Series At Commands Reference Manual
  1. Manuals
  2. Brands
  3. Telit Wireless Solutions Manuals
  4. Control Unit
  5. HE863 Series
  6. At commands reference manual
Telit Wireless Solutions HE863 Series At Commands Reference Manual

Telit Wireless Solutions HE863 Series At Commands Reference Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

HE863 family AT commands reference
guide
80377ST10083a Rev.6 – 2012-11-12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HE863 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Telit Wireless Solutions HE863 Series

Summary of Contents for Telit Wireless Solutions HE863 Series

  • Page 1 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12...
  • Page 2 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 APPLICABILITY TABLE PRODUCT HE863-EUD HE863-EUG HE863-EUR HE863-NAD HE863-NAG HE863-NAR HE863-AUD HE863-AUG HE863-AUR SW Version 11.00.XY2 Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 2 of 229...
  • Page 3 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Notice While reasonable efforts have been made to assure the accuracy of this document, Telit assumes no liability resulting from any inaccuracies or omissions in this document, or from use of the information obtained herein.
  • Page 4 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 Usage and Disclosure Restrictions License Agreements The software described in this document is the property of Telit and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of such an agreement.

  • Page 5: Table Of Contents

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 Contents Introduction ......................6 1.1. Scope ........................6 1.2. Audience ........................6 1.3. Contact Information, Support ................... 6 1.4. Document Organization .................... 7 1.5. Text Conventions ...................... 7 1.6. Related Documents ....................7 HE863 family Product Specification ..............

  • Page 6: Introduction

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 Introduction 1.1. Scope This document is aimed in providing an detailed specification and a comprehensive listing as a reference for the whole set of AT command. 1.2. Audience Readers of this document should be familiar with Telit modules and their ease of controlling by means of AT Commands.

  • Page 7: Document Organization

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 1.4. Document Organization This document contains the following chapters: Chapter 1: “Introduction” provides a scope for this document, target audience, contact and support information, and text conventions. Chapter 2: “Overview” about the aim of this document and implementation suggestions. Chapter 3: “AT Commands”...

  • Page 8: He863 Family Product Specification

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 HE863 family Product Specification FEATURE ITEM HE863-EUD HE863-EUR HE863-EUG HE863-NAD HE863-NAR HE863-NAG ▪ Dual-band ▪ Dual-band ▪ Dual-band ▪ Dual-band ▪ Dual-band UMTS/HSPA ▪ Dual-band UMTS/HSPA UMTS/HSPA UMTS/HSPA UMTS/HSPA 2100/900 UMTS/HSPA 1900/850 2100/900...
  • Page 9 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 Dual-band ▪ Dual-band ▪ Dual-band UMTS/HSPA UMTS/HSPA UMTS/HSPA 2100/850 2100/850 2100/850 ▪ Quad-Band ▪ Quad-Band ▪ Quad-Band GSM 850/900 interface GSM 850/900 GSM 850/900 /1800/1900 /1800/1900 /1800/1900 ▪ Standalone ▪ Data only Size 41.4(L)X31.4(W)X2.9(T) ▪...

  • Page 10: At Commands

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 AT COMMANDS The Telit wireless module family can be driven via the serial interface using the standard AT commands . The Telit wireless module family is compliant with: 1. Hayes standard AT command set, in order to maintain the compatibility with existing SW programs.

  • Page 11: Definitions

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.1. Definitions The following syntactical definitions apply: <CR> Carriage return character, is the command line and result code terminator character, which value, in decimal ASCII between 0 and 255,is specified within parameter S3. The default value is 13.

  • Page 12: At Command Syntax

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.2. AT Command Syntax The syntax rules followed by Telit implementation of either Hayes AT commands and GSM/WCDMA commands are very similar to those of standard basic and extended AT commands.

  • Page 13: String Type Parameters

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.2.1. String Type Parameters A string, either enclosed between quotes or not, is considered to be a valid string type parameter input. According to V25.ter space characters are ignored on the command line and may be used freely for formatting purposes, unless they are embedded in numeric or quoted string constants;...
  • Page 14 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 commands in the same command line, because if one of them fails, then an error message is received but it is not possible to argue which one of them has failed the execution. If command V1 is enabled (verbose responses codes) and all commands in a command line has been performed successfully, result code <CR><LF>OK<CR><LF>...
  • Page 15 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.2.2.1. ME Error Result Code - +CME ERROR: <err> This is NOT a command, it is the error response to +Cxxx 3gpp TS 27.007 commands. Syntax: +CME ERROR: <err> Parameter: <err> - error code can be either numeric or verbose (see +CMEE).The possible values of <err>...
  • Page 16 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 Numeric Format Verbose Format Illegal ME (#6)* GPRS service not allowed (#7)* PLMN not allowed (#11)* Location area not allowed (#12)* Roaming not allowed in this location area (#13)* GPRS related errors to a failure to Activate a Context and others: service option not supported (#32)* requested service option not subscribed (#33)* service option temporarily out of order (#34)*...
  • Page 17 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.2.2.2. Message Service Failure Result Code - +CMS ERROR: <err> This is NOT a command; it is the error response to +Cxxx 27.005 3gpp TS commands Syntax: +CMS ERROR: <err> Parameter: <err>...

  • Page 18: Information Responses And Result Codes

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.2.3. Information Responses And Result Codes The TA response, in case of verbose response format enabled, for the previous examples command line could be as shown below: Information response to +CMD1? <CR><LF>+CMD1:2,1,10<CR><LF>...

  • Page 19: Command Response Time-Out

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.2.4. Command Response Time-Out Every command issued to the Telit modules returns a result response if response codes are enabled (default). The time needed to process the given command and return the response varies, depending on the command type.
  • Page 20 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CAMM +CPUC +VTS 180 (transmission of full “1234567890*#ABCD” string with no delay between tones, default duration) +CSCA 5 (read and set commands) +CSAS +CRES +CMGS 180 after CTRL-Z; 1 to get ‘>’ prompt +CMSS 180 after CTRL-Z;...

  • Page 21: Command Issuing Timing

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #FTPCLOSE 500 (timeout set with AT#FTPTO, in case no response is received from server) #FTPTYPE 500 (timeout set with AT#FTPTO, in case no response is received from server) #FTPDELE 500 (timeout set with AT#FTPTO, in case no response is received from server) #FTPPWD 500 (timeout set with AT#FTPTO, in case no...

  • Page 22: Storage

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.3. Storage 3.3.1. Factory Profile And User Profiles The Telit wireless modules stores the values set by several commands in the internal non volatile memory (NVM), allowing to remember this setting even after power off. In the NVM these values are set either as factory profile or as user profiles: there are two customizable user profiles and one factory profile in the NVM of the device: by default the device will start with user profile 0 equal to factory profile.
  • Page 23 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 The values set by following commands are stored in the profile extended section and they don’t depend on the specific AT channel instance: +CALM, +CRSL, +CMUT, +CLVL, #CAP, #SRS, #SRP, #STM, #E2SMSRI, #SHFEC,...

  • Page 24: 3.4. At Commands Availability Table

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.4. AT Commands Availability Table The following table lists the AT commands set and matches the availability of every single command versus the Telit wireless module family. HE863-EUD HE863-EUR HE863-EUG COMMAND HE863-NAD HE863-NAR...
  • Page 25 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 HE863-EUD HE863-EUR HE863-EUG COMMAND HE863-NAD HE863-NAR HE863-NAG Function HE863-AUD HE863-AUR HE863-AUG    Service Reporting Control    +CEER Extended Error Report    +CRC Cellular Result Codes ...
  • Page 26 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 HE863-EUD HE863-EUR HE863-EUG COMMAND HE863-NAD HE863-NAR HE863-NAG Function HE863-AUD HE863-AUR HE863-AUG +CGEQMIN    3G Quality Of Service Profile (Minimum Acceptable)    +CGQREQ Quality Of Service Profile (Requested) ...
  • Page 27 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 HE863-EUD HE863-EUR HE863-EUG COMMAND HE863-NAD HE863-NAR HE863-NAG Function HE863-AUD HE863-AUR HE863-AUG #SHFSD   Set Headset Sidetone   #SPKMUT Speaker Mute COntrol   #HFRECG Handsfree Receiver Gain  ...
  • Page 28 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 HE863-EUD HE863-EUR HE863-EUG COMMAND HE863-NAD HE863-NAR HE863-NAG Function HE863-AUD HE863-AUR HE863-AUG    Socket Info    #SGACT Context Activation    Socket Shutdown    #SCFG Socket Configuration ...

  • Page 29: 3.5. At Commands References

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5. AT Commands References 3.5.1. Command Line General Format 3.5.1.1. Command Line Prefixes 3.5.1.1.1. Starting A Command Line - AT AT - Starting A Command Line The prefix AT, or at, is a two-character abbreviation (ATtention), always used to start a command line to be sent from TE to TA Reference 3GPP TS 27.007...

  • Page 30: Hayes Compliant At Commands

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.2. Hayes Compliant AT Commands 3.5.2.1. Generic Modem Control 3.5.2.1.1. Set To Factory-Defined Configuration - &F &F - Set To Factory-Defined Configuration Execution command sets the configuration parameters to default values specified by AT&F[<value>] manufacturer;...
  • Page 31 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +FCLASS - Select Active Service Class 8 - voice Read command returns the current configuration value of the parameter <n>. AT+FCLASS? Test command returns all supported values of the parameters <n>. AT+FCLASS=? Note “ATD<number>;”...
  • Page 32 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 &W - Store Current Configuration 0..1 - profile Note: if parameter is omitted, the command has the same behaviour of AT&W0. 3.5.2.1.7. Manufacturer Identification - +GMI +GMI - Manufacturer Identification Execution command returns the manufacturer identification.
  • Page 33 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +GSN - Serial Number serial number. HE863 series returns IMEI assigned to the indivisual product. Test command returns OK result code. AT+GSN=? Reference V.25ter 3.5.2.1.12. Display Current Base Configuration And Profile - &V &V - Display Current Base Configuration And Profile...
  • Page 34 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 &V3 - Extended S Registers Display <reg0> <dec> <hex> <reg1> <dec> <hex> where <regn> - S register number 000..005 <dec> - current value in decimal notation <hex> - current value in hexadecimal notation 3.5.2.1.16.
  • Page 35 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 E - Command Echo Note: if parameter is omitted, the command has the same behaviour of ATE0 Reference V25ter 3.5.2.2.2. Quiet Result Codes - Q Q - Quiet Result Codes Set command enables or disables the result codes.
  • Page 36 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 V - Response Format information responses <CR><LF> <text><CR><LF> result codes <CR><LF> <verbose code><CR><LF> Note: the <text> portion of information responses is not affected by this setting. Note: if parameter is omitted, the command has the same behaviour of ATV0 Reference V25ter Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved.
  • Page 37 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.2.2.4. Extended Result Codes - X X - Extended Result Codes Set command selects the result code messages subset used by the modem to inform ATX[<n>] the DTE of the result of the commands. Parameter: <n>...
  • Page 38 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.2.2.5. Fixed DTE Interface Rate - +IPR +IPR - Fixed DTE Interface Rate Set command specifies the DTE speed (UART only) at which the device accepts AT+IPR=<rate> commands during command mode operations; it may be used to fix the DTE-DCE interface speed.
  • Page 39 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +IFC – DTE-Modem Local Flow Control Note: Flow control is always hardware bi-directional flow control (both RTS/CTS active) Note: Hardware flow control (AT+IFC=2,2) is not active in command mode. Read command returns active flow control settings. AT+IFC? +IFC: 0,0 Test command returns all supported values of the parameters <by_te>...
  • Page 40 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 &C - Data Carrier Detect (DCD) Control 1 - DCD follows the Carrier detect status: if carrier is detected DCD is high, otherwise DCD is low. (factory default) 2 - DCD off while disconnecting Note: if parameter is omitted, the command has the same behaviour of AT&C0 Note: Current value is returned by AT&V Reference...
  • Page 41 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 &K Flow Control Note: Flow control is always hardware bi-directional flow control (both RTS/CTS active) Note: &K has no Read Command. To verify the current setting of &K, simply check the settings of the active profile issuing AT&V. Note: Hardware flow control (AT&K3) is not active in command mode.
  • Page 42 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.2.3. Call Control 3.5.2.3.1. Dial - D D – Dial The V.24ter dial command D lists characters that may be used in a dialing string ATD<number>[;] for making a call or controlling supplementary services in accordance with GSM02.30 and initiates the indicated kind of call.
  • Page 43 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 H - Disconnect conversation is active the device is in on-line mode (commands are not sensed and characters are sent to the other party), hence escape sequence (see register S2) is required before issuing this command, otherwise if &D1 option is active, DTR pin has to be tied Low to return in command mode.
  • Page 44 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.2.4. Modulation Control 3.5.2.4.1. Modulation Selection - +MS +MS - Modulation Selection Set command has no effect is included only for backward compatibility with AT+MS= landline modems. <carrier> [,<automode> Parameters: [,<min_rate>...
  • Page 45 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.2.5. S Parameters Basic commands that begin with the letter “S” are known as “S-Parameters”. The number following the “S” indicates the “parameter number” being referenced. If the number is not recognized as a valid parameter number, an ERROR result code is issued.

  • Page 46: 3Gpp Ts 27.007 At Commands

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3. 3GPP TS 27.007 AT Commands 3.5.3.1. General 3.5.3.1.1. Request Manufacturer Identification - +CGMI +CGMI - Request Manufacturer Identification Execution command returns the device manufacturer identification code without AT+CGMI command echo. Test command returns OK result code.
  • Page 47 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CSCS - Select TE Character Set to FF; e.g. “032FE6” equals three 8-bit characters with decimal values 3, 47 and 230; no conversions to the original MT character set shall be done. “IRA”...
  • Page 48 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3.2. Call Control 3.5.3.2.1. Hang Up Call - +CHUP +CHUP - Hang Up Call This execution command causes TA to hang up the current call of the ME. AT+CHUP Note: all active call will be released but neither waiting or held calls. Test command returns the OK result code AT+CHUP=? Reference...
  • Page 49 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CBST - Select Bearer Service Type 17 - 33600 bps (V.34) 39 - 9600 bps (V.120) 43 - 14400 bps (V.120) 47 - 19200 bps (V.120) 48 - 28800 bps (V.120) 49 - 38400 bps (V.120) 50 - 48000 bps (V.120) 51 - 56000 bps (V.120)
  • Page 50 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CRLP - Radio Link Protocol Set command sets Radio Link Protocol (RLP) parameters used when non- AT+CRLP=[<iws> transparent data calls are originated [,<mws>[,<T1> [,<N2>[,<ver>]]]]] Parameters: <iws> - IWF window Dimension 1..61 - factory default value is 61 <mws>...
  • Page 51 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CR - Service Reporting Control Reference 3GPP TS 27.007 3.5.3.2.6. Extended Error Report - +CEER +CEER - Extended Error Report Execution command returns one or more lines of information text <report> AT+CEER offering the TA user an extended error report, in the format: +CEER: <report>...
  • Page 52 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CRC - Cellular Result Codes Test command returns supported values of the parameter <mode>. AT+CRC=? Reference 3GPP TS 27.007 3.5.3.2.8. Voice Hang Up Control - +CVHU +CVHU - Voice Hang Up Control Set command selects whether ATH or "drop DTR"...
  • Page 53 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3.3.2. Read Operator Names - +COPN +COPN - Read Operator Names Execution command returns the list of operator names from the ME in the format: AT+COPN +COPN: <numeric1>,<alpha1>[<CR><LF> +COPN: <numeric2>,<alpha2>[…]] where: <numericn>...
  • Page 54 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CREG - Network Registration Report <Ci> - Cell Id for the currently registered on cell Note: <Lac> and <Ci> are reported only if <mode>=2 and the mobile is registered on some network cell. Read command reports the <mode>...
  • Page 55 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +COPS - Operator Selection Parameters: <mode> 0 - Automatic, in this case other fields are ignored and registration is done automatically by ME(default) 1 - Manual. Other parameters like format and operator need to be passed 2 - Deregister from network 3 - It sets <format>...
  • Page 56 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +COPS - Operator Selection Note: since with this command a network scan is done, this command may require some seconds before the output is given. Example AT+COPS? +COPS: 0,0,"Test PLMN 1-1",0 at+cops=? +COPS: (2,"","","45008",2),(1,"Test PLMN 1-1","Test1- 1","00101",0),(3,"","","45005",2),,(0-4),(0-2)
  • Page 57 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CLCK - Facility Lock/Unlock 1 lock 2 query status <passwd> string type; shall be the same as password specified for the facility from the MT user interface or with command Change Password +CPWD <class>...
  • Page 58 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPWD - Change Facility Password <oldpwd> - string type, it shall be the same as password specified for the facility from the ME user interface or with command +CPWD. <newpwd> - string type, it is the new password Note: parameter <oldpwd>...
  • Page 59 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CLIP - Calling Line Identification Presentation Note: in the +CLIP: response they are currently not reported either the subaddress information (it’s always “” after the 2 comma) and the subaddress type information (it’s always 128 after the 3 comma) Read command returns the presentation status of the CLI in the...
  • Page 60 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CLIR - Calling Line Identification Restriction 2 - unknown (e.g. no network present, etc.) 3 - CLI temporary mode presentation restricted 4 - CLI temporary mode presentation allowed Test command reports the supported values of parameter <n>. AT+CLIR=? Reference 3GPP TS 27.007...
  • Page 61 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CCFC - Call Forwarding Number And Condition 0 - unconditional 1 - mobile busy 2 - no reply 3 - not reachable 4 - all calls 5 - all conditional calls <cmd>...
  • Page 62 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CCFC - Call Forwarding Number And Condition Test command reports supported values for the parameter <reason>. AT+CCFC=? Reference 3GPP TS 27.007 Note When querying the status of a network service (<cmd>=2) the response line for 'not active' case (<status>=0) should be returned only if service is not active for any <class>.
  • Page 63 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CCWA - Call Waiting <type> - type of address in integer format <class> - see before <alpha> - string type; alphanumeric representation of <number> corresponding to the entry found in phonebook; used character set should be the one selected with +CSCS.
  • Page 64 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CHLD - Call Holding Services supported 3 - adds a held call to the conversation 4 - connects the two calls and disconnects the subscriber from both calls (Explicit Call Transfer)(ECT). 6 - puts an active call on hold or an held call to active, while another call is waiting 7 - disconnect users in multiparty without accepting incoming call...
  • Page 65 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CUSD - Unstructured Supplementary Service Data Note Only mobile initiated operations are supported 3.5.3.3.14. Advice Of Charge - +CAOC +CAOC - Advice Of Charge Set command refers to the Advice of Charge supplementary services that enable AT+CAOC= subscriber to get information about the cost of calls;...
  • Page 66 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CLCC - List Current Calls <dir> - call direction 0 - mobile originated call 1 - mobile terminated call <stat> - state of the call 0 - active 1 - held 2 - dialing (MO call) 3 - alerting (MO call) 4 - incoming (MT call)
  • Page 67 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CSSN - SS Notification 0 - disable 1 - enable When <n>=1 and a supplementary service notification is received after a mobile originated call setup, an unsolicited code: +CSSI: <code1>[,<index>] is sent to TE before any other MO call setup result codes, where: <code1>: 0 - unconditional call forwarding is active...
  • Page 68 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3.3.17. Closed User Group Supplementary Service Control - +CCUG +CCUG - Closed User Group Supplementary Service Control Set command allows control of the Closed User Group supplementary service AT+CCUG= [3GPP TS 02.85/22.085]. [<n>[,<index>...
  • Page 69 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPOL - Preferred Operator List 0 – long format alphanumeric <oper> 1 – short format alphanumeric <oper> 2 - numeric <oper> <oper> - string type <GSM_AcTn> - GSM access technology 0 –...
  • Page 70 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPLS - Selection of preferred PLMN list +CPLS 2 - HPLMN selector with Access Technology EFHPLMNwAcT Read command returns the selected PLMN selector list from the SIM/USIM AT+CPLS? +CPLS: <list> Test command returns the whole index range supported lists by the SIM./USIM AT+CPLS =? Reference...
  • Page 71 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3.4. Mobile Equipment Control 3.5.3.4.1. Phone Activity Status - +CPAS +CPAS - Phone Activity Status Execution command reports the device status in the form: AT+CPAS +CPAS: <pas> Where: <pas> - phone activity status 0 - ready (device allows commands from TA/TE) 1 - unavailable (device does not allow commands from TA/TE) 2 - unknown (device is not guaranteed to respond to instructions)
  • Page 72 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CFUN - Set Phone Functionality Reference 3GPP TS 27.007 3.5.3.4.3. Enter PIN - +CPIN +CPIN - Enter PIN Set command sends to the device a password which is necessary before it can be AT+CPIN=<pin>...
  • Page 73 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPIN - Enter PIN be given Note: Pin pending status at startup depends on PIN facility setting, to change or query the default power up setting use the command AT+CLCK=SC,<mode>,<pin> Example AT+CMEE=1 AT+CPIN?
  • Page 74 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPIN - Enter PIN Reference 3GPP TS 27.007 3.5.3.4.4. Signal Quality - +CSQ +CSQ - Signal Quality Execution command reports received signal quality indicators in the form: AT+CSQ +CSQ: <rssi>,<ber> where <rssi>...
  • Page 75 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPBS - Select Phonebook Memory Storage “AP” - Selected application phonebook. “BN” – SIM/USIM barred-dialling-number phonebook (only valid with PIN2) “SN” – SIM/USIM service-dialling-number phonebook <password> string type value representing the PIN2-code required when selecting PIN2-code locked Read command returns the actual values of the parameter <storage>, the number of AT+CPBS?
  • Page 76 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPBR - Read Phonebook Entries Where: <index> integer type values in the range of location numbers of phonebook memory <number> string type phone number of format <type> <type> type of address octet in integer format <text>...
  • Page 77 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPBR - Read Phonebook Entries +CPBR: 1,”01048771234”,129,”James” Reference 3GPP TS 27.007 3.5.3.4.7. Find Phonebook Entries - +CPBF +CPBF - Find Phonebook Entries Execution command returns phonebook entries (from the current phonebook AT+CPBF= memory storage selected with +CPBS) which alphanumeric field start with string <findtext>...
  • Page 78 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPBF - Find Phonebook Entries Test command reports the maximum lengths of <number> and <text> fields, in the AT+CPBF=? format: +CPBF:[<nlength>],[<tlength>],[<glength>],[<slength>],[<elength>] where: <nlength> integer type value indicating the maximum length of field <number> <tlength>...
  • Page 79 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPBW - Write Phonebook Entry <secondtext> string type field of maximum length <slength> <email> string type field of maximum length <elength> Test command returns location range supported by the current storage as a AT+CPBW=? compound value, the maximum length of <number>...
  • Page 80 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CCLK - Clock Management Note: the three last characters of <time>, i.e. the time zone information, are returned by +CCLK? only if the #NITZ URC ‘extended’ format has been enabled (see #NITZ). Test command returns the OK result code.
  • Page 81 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CRSM - Restricted SIM Access 178 - READ RECORD 192 - GET RESPONSE 214 - UPDATE BINARY 220 - UPDATE RECORD 242 - STATUS <fileid> - identifier of an elementary data file on SIM. Mandatory for every command except STATUS and may be e.g..
  • Page 82 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CRSM - Restricted SIM Access +CRSM: 144,0,42434A554EFFFFFFFFFFFFFFFFFFFFFF0681105678 9282FFFFFFFFFFFFFF Update Binary, KcGPRS(6F52) AT+CRSM=214,28539,0,0,8,C69018C7958C87 +CRSM: 144,0 Update Record, ADN(6F3A) AT+CRSM=220,28474,9,4,30,657469FFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFF +CRSM: 144,0 Status, FPLMN(6F7B) AT+CRSM=242,28539 +CRSM: 144,0,623C820238218410A0000000871002FFFFFFFF8904 0300FFA5118001318103010A3282011E8304000030E08A01058B032F0609C6099 001C0830101830181 Reference 3GPP TS 27.007, 3GPP TS 11.11/31.102/51.011 3.5.3.4.12.
  • Page 83 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3.4.13. Ringer Sound Level - +CRSL +CRSL - Ringer Sound Level Set command is used to select the incoming call ringer sound level of the device. AT+CRSL=<level> Parameter: <level> - ringer sound level 0 - Off 1 - low 2 - middle...
  • Page 84 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMUT - Microphone Mute Control Note: this command mutes/activates both microphone audio paths, internal mic and external mic. Read command reports whether the muting of the microphone audio line during a AT+CMUT? voice call is enabled or not, in the format: +CMUT: <n>...
  • Page 85 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CAMM - Accumulated Call Meter Maximum +CAMM : <acmm> where: <acmm> - ACMmax value in home units, string type: three bytes of the ACMmax value in hexadecimal format (e.g. “00001E” indicates decimal value 30) Test command returns the OK result code AT+CAMM=? Reference...
  • Page 86 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3.4.20. Read ICCID (Integrated Circuit Card Identification) - +CCID +CCID - Read ICCID Execution command reads on SIM the ICCID (card identification number that AT+CCID provides a unique identification number for the SIM) Test command returns the OK result code.
  • Page 87 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CALA - Alarm Management GPIO6 high, provided its <direction> has been set to alarm output, and keeps it in this state until a #WAKE or #SHDN command is received or a 90 seconds timer expires.
  • Page 88 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3.4.22. Delete Alarm - +CALD +CALD - Delete Alarm Execution command deletes an alarm in the ME AT+CALD=<n> Parameter: <n> - alarm index Test command reports the range of supported values for <n> parameter. AT+CALD=? Reference 3G TS 27.007...
  • Page 89 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +VTS - DTMF Tones Transmission was defined through +VTD command. <duration> - duration of a tone in 1/100 sec.; this parameter can be specified only if the length of first parameter is just one ASCII character 0 - a single DTMF tone will be transmitted for a duration depending on the network, no matter what the current +VTD setting is.
  • Page 90 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGCLASS - GPRS mobile station class Read command returns the current value of the GPRS class in the format: AT+CGCLASS? +CGLASS: <class> Test command reports the range for the parameter <class> AT+CGCLASS=? 3.5.3.7.2.
  • Page 91 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGEREP - GPRS Event Reporting to the TE when <mode> 1 or 2 is entered (OK response shall be given before flushing the codes) Read command returns the current <mode> and <bfr> settings, in the AT+CGEREP? format: +CGEREP: <mode>,<bfr>...
  • Page 92 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGREG - GPRS Network Registration Status +CGREG: <n>,<stat> Test command returns supported values for parameter <n> AT+CGREG=? Reference 3GPP TS 27.007 3.5.3.7.5. Define PDP Context - +CGDCONT +CGDCONT - Define PDP Context Set command specifies GPRS PDP context parameter values for a GPRS PDP AT+CGDCONT= context identified by the (local) context identification parameter, <cid>...
  • Page 93 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGDCONT - Define PDP Context If no PDP context has been defined, it has no effect and OK result code is returned. Test command returns values supported as a compound value AT+CGDCONT=? Example AT+CGDCONT=1,”IP”,”APN”,”10.10.10.10”,0,0...
  • Page 94 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGQMIN - Quality Of Service Profile (Minimum Acceptable) Note: only the “IP” PDP_Type is currently supported. Example AT+CGQMIN=1,0,0,3,0,0 AT+CGQMIN? +CGQMIN: 1,0,0,5,0,0 AT+CGQMIN=? +CGQMIN: "IP",(0-3),(0-4),(0-5),(0-9),(0-18,31) +CGQMIN: "PPP",(0-3),(0-4),(0-5),(0-9),(0-18,31) +CGQMIN: "IPV6",(0-3),(0-4),(0-5),(0-9),(0-18,31) - (Not supported) Reference 3GPP TS 27.007;...
  • Page 95 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGEQMIN – 3G Quality Of Service Profile (Minimum Acceptable) 64~568 - in 8 kbps steps 576~8640 - in 64 kbps steps <Guaranteed bitrate DL> - the guaranteed bitrate down link(kbits/s) 0 - subscribed value 1~63 - in 1 kbps steps 64~568 - in 8 kbps steps...
  • Page 96 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGEQMIN – 3G Quality Of Service Profile (Minimum Acceptable) – yes – no detect – subscribed value <Transfer delay > Transfer delay (milliseconds) 0 - subscribed value 10~150 - in 10 ms steps 200~950 - in 50 ms steps 1000~4000 - in 50ms steps <Traffic handling priority >...
  • Page 97 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGEQMIN – 3G Quality Of Service Profile (Minimum Acceptable) AT+CGEQMIN=? +CGEQMIN: "IP",(0-4), (0,1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps steps), (0,1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps steps, 8700-16000 in 100 kbps steps), (0,1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps steps), (0,1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps steps, 8700-16000 in 100 kbps steps),(0-2), (0,10-1500,1502,1510,1520),...
  • Page 98 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGQREQ - Quality Of Service Profile (Requested) Example AT+CGQREQ? +CGQREQ: 1,0,0,3,0,0 AT+CGQREQ=1,0,0,3,0,0 AT+CGQREQ=? +CGQREQ: "IP",(0-3),(0-4),(0-5),(0-9),(0-18,31) +CGQREQ: "PPP",(0-3),(0-4),(0-5),(0-9),(0-18,31) +CGQREQ: "IPV6",(0-3),(0-4),(0-5),(0-9),(0-18,31) - (Not supported) Reference 3GPP TS 27.007; 3GPP TS 03.60/23.060 3.5.3.7.9. 3G Quality Of Service Profile (Requested) - +CGEQREQ +CGEQREQ –...
  • Page 99 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGEQREQ – 3G Quality Of Service Profile (Requested) 576~8640 - in 64 kbps steps <Guaranteed bitrate DL> - the guaranteed bitrate down link(kbits/s) 0 - subscribed value 1~63 - in 1 kbps steps 64~568 - in 8 kbps steps 576~8640 - in 64 kbps steps 8700~16000 - in 100 kbps steps...
  • Page 100 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGEQREQ – 3G Quality Of Service Profile (Requested) – no detect – subscribed value <Transfer delay > Transfer delay (milliseconds) 0 – subscribed value 10~150 - in 10 ms steps 200~950 - in 50 ms steps 1000~4000 - in 50 ms steps <Traffic handling priority >...
  • Page 101 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGEQREQ – 3G Quality Of Service Profile (Requested) 64 kbps steps), (0,1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps steps, 8700-16000 in 100 kbps steps), (0,1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps steps), (0,1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps steps, 8700-16000 in 100 kbps steps), (0-2), (0,10-1500,1502,1510,1520), ("1E6","1E5","1E4","1E3","7E3","1E2","1E1",","0E0"),("6E8","1E6","1E5","1E4","...
  • Page 102 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGPADDR - Show PDP Address +CGPADDR: <cid>,<PDP_addr>[<CR><LF><CR><LF>+CGPADDR: <cid>,<PDP_addr>[…]] Parameters: <cid> - a numeric parameter which specifies a particular PDP context definition (see +CGDCONT command). If no <cid> is specified, the addresses for all defined contexts are returned.
  • Page 103 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGEQNEG – 3G Quality Of Service Profile (Negotiated) Test command returns a list of <cid>s associated with active contexts. AT+CGEQNEG=? Example AT+CGEQREQ? +CGEQREQ: 1,4,0,0,0,0,2,0,"0E0","0E0",3,0,0 AT+CGACT=1,1 T+CGEQNEG=? +CGEQREQ: (1) AT+CGEQNEG=1 +CGEQNEG: 1,3,128,384,0,0,2,1500,"1E4","1E5",3,0,1 Reference 3GPP TS 27.007;...
  • Page 104 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGDATA - Enter Data State AT+CGDATA=”PPP”,1 CONNECT Reference 3GPP TS 27.007 Reproduction forbidden without written authorization from Telit Communications S.p.A.- All Rights Reserved. Page 104 of...
  • Page 105 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.3.8. Commands For Battery Charger 3.5.3.8.1. Battery Charge - +CBC + CBC - Battery Charge Execution command returns the current Battery Charge status in the format: AT+CBC +CBC: <bcs>,<bcl> where: <bcs>...

  • Page 106: 3Gpp Ts 27.005 At Commands For Sms And Cbs

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.4. 3GPP TS 27.005 AT Commands for SMS and CBS 3.5.4.1. General Configuration 3.5.4.1.1. Select Message Service - +CSMS +CSMS - Select Message Service Execution command selects messaging service <service>. AT+CSMS= <service>...
  • Page 107 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.4.1.2. Preferred Message Storage - +CPMS +CPMS - Preferred Message Storage Set command selects memory storages <mem1>, <mem2> and <mem3> to be AT+CPMS= used for reading, writing, etc. <mem1>[,<mem2> If chosen storage is not appropriate for the ME (but is supported by the TA), final [,<mem3>]] result code +CMS ERROR: <err>...
  • Page 108 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CPMS - Preferred Message Storage reading, writing and storing respectively. Test command reports the supported values for parameters <mem1>, <mem2> and AT+CPMS=? <mem3> Example AT+CPMS? +CPMS: "ME",27, 50,"ME",27, 50,"SR",1,20 AT+CPMS="SM","ME","SM" +CPMS: 1,20,27, 50,1,20 AT+CPMS? +CPMS: "SM",1,20,"ME",27, 50,"SM",1,20...
  • Page 109 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.4.2. Message Configuration 3.5.4.2.1. Service Center Address - +CSCA +CSCA -Service Center Address Set command sets the Service Center Address to be used for mobile originated SMS AT+CSCA= transmissions. <sca> [,[<tosca>]] Parameter: <sca>...
  • Page 110 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CGSMS – Select service for MO SMS messages 0 – Packet Domain 1 - Circuit switched (factory default) 2 – Packet Domain preferred (use circuit switched if GRPS is not available) 3 - Circuit switched preferred (use Packet Domain if circuit switched not available) Read command reports the currently selected service or service preference : AT+CGSMS?
  • Page 111 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.4.2.4. Show Text Mode Parameters - +CSDH +CSDH - Show Text Mode Parameters Set command indicates whether detailed header information is shown in text mode AT+CSDH= result codes or not. [<show>] Parameter: <show>...
  • Page 112 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.4.2.5. Select Cell Broadcast Message Types - +CSCB +CSCB -Select Cell Broadcast Message Types Set command controls which CB messages are accepted and those that are rejected. AT+CSCB= [<mode>[,<mids> Parameters: [,<dcss>]]] <mode>...
  • Page 113 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CRES - Restore Settings Execution command restores message service settings saved by +CSAS command AT+CRES from SIM. [=<profile>] Parameter: <profile> 0 - it restores message service settings from NVM. 1..n - it restores message service settings from SIM. The value of n depends on the SIM and its max is 3.
  • Page 114 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.4.3. Message Receiving And Reading 3.5.4.3.1. New Message Indications To Terminal Equipment - +CNMI +CNMI - New Message Indications To Terminal Equipment Set command selects the procedure, how receiving of new messages from the AT+CNMI=[ network is indicated to the TE when TE is active.
  • Page 115 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CNMI - New Message Indications To Terminal Equipment <length> - PDU length <pdu> - PDU message (TEXT Mode) +CMT:<oa>,<alpha>,<scts>[,<tooa>,<fo>,<pid>,<dcs>, <sca>,<tosca>,<length>]<CR><LF><data> (the information written in italics will be present depending on +CSDH last setting) where: <oa>...
  • Page 116 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CNMI - New Message Indications To Terminal Equipment <PDU> - message PDU (TEXT Mode) +CBM:<sn>,<mid>,<dcs>,<pag>,<pags><CR><LF><data> where: <sn> - message serial number <mid> - message ID <dcs> - Data Coding Scheme <pag>...
  • Page 117 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CNMI - New Message Indications To Terminal Equipment <index> - location on the memory where SMS is stored <bfr> - buffered result codes handling method: 0 - TA buffer of unsolicited result codes defined within this command is flushed to the TE when <mode>=1..2 is entered 1 - TA buffer of unsolicited result codes defined within this command is cleared when <mode>=1..2 is entered.
  • Page 118 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGL - List Messages <alpha> - string type alphanumeric representation of <da> or <oa>, corresponding to an entry found in the phonebook; used character set is the one selected with command +CSCS. <length>...
  • Page 119 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGL - List Messages <stat> - message status <fo> - first octet of the message PDU <mr> - message reference number <scts> - arrival time of the message to the SC <dt>...
  • Page 120 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGR - Read Message The output depends on the last settings of command +CMGF (message format to be used) (PDU Mode) The output has the following format: +CMGR: <stat>,<alpha>,<length><CR><LF><pdu> where <stat>...
  • Page 121 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGR - Read Message <dcs> - Data Coding Scheme <oa> - Originator address, string type. <da> - Destination address, string type. <alpha> - string type alphanumeric representation of <da> or <oa>, corresponding to an entry found in the phonebook;...
  • Page 122 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CNMA – New Message Acknowledgement will NOT be reset automatically. Parameter: <n> - Type of acknowledgement in PDU mode 0 : send RP-ACK without PDU (same as TEXT mode) 1 : send RP-ACK with optional PDU message. 2 : send RP-ERROR with optional PDU message.
  • Page 123 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CNMA – New Message Acknowledgement AT+CNMA=2,3<CR> > 00FF00 <Ctrl-Z> (Text Mode) SMS AT commands compatible with 3GPP TS 27.005 Phase 2+ version . AT+CSMS=1 +CSMS: 1,1,1 Set Text mode. AT+CMGF=1 AT+CNMI=2,2,0,0,0 Message is received from network.
  • Page 124 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.4.4. Message Sending And Writing 3.5.4.4.1. Send Message - +CMGS +CMGS - Send Message (PDU Mode) (PDU Mode) Execution command sends to the network a message. AT+CMGS= <length> Parameter: <length> - length of the actual TP data unit in octets (i.e. the RP layer SMSC address octets are not counted in the length).
  • Page 125 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGS - Send Message Note: SIO consumes all SMS commands and also the text entered by user. So C-AT doesnot receive any SMS commands until SIO is fixed. (Text Mode) (Text Mode) Execution command sends to the network a message.
  • Page 126 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGS - Send Message +CMGS: <mr>[,<scts>] where <mr> - message reference number. <scts> - TP-Service Centre Time Stamp in Time String Format. Note: if message sending fails for some reason, an error code is reported. Note: concatenated SMS is not supported Note: In text mode, the maximum length of an SMS depends on the used coding scheme: It is 160 characters if the 7 bit GSM coding scheme is used, and 140...
  • Page 127 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.4.4.2. Send Message From Storage - +CMSS +CMSS - Send Message From Storage Execution command sends message with location value <index> from preferred AT+CMSS= message storage <mem2> to the network. <index>[,<da>...
  • Page 128 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMSS - Send Message From Storage +CMSS: 136 Reference 3GPP TS 27.005 3.5.4.4.3. Write Message To Memory - +CMGW +CMGW - Write Message To Memory (PDU Mode) (PDU Mode) Execution command writes in the <mem2> memory storage a new message. AT+CMGW= <length>...
  • Page 129 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGW - Write Message To Memory "REC READ" - received message read "STO UNSENT" - message stored not yet sent (default) "STO SENT" - message stored already sent After command line is terminated with <CR>, the device responds sending a four character sequence prompt: <CR><LF><greater_than><space>...
  • Page 130 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGW - Write Message To Memory Reference 3GPP TS 27.005 Example AT+CMGF=0 set PDU mode AT+CMGW=18 > 088128010099010259115507811020905512F90000A704F4F29C0E +CMGW: 29 AT+CMGF=1 set text mode AT+CSMP=17,167,0,0 AT+CSCA=”821029190903”,145 AT+CMGW="0165872928" > test message... +CMGW: 28 3.5.4.4.4.
  • Page 131 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +CMGD - Delete Message Example AT+CMGD=? +CMGD: (0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,3 0,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50),(0-4) AT+CMGD=11 Delete message in 10th record AT+CMGD=1,4 Delete all messages Reference 3GPP TS 27.005 3.5.4.4.5. More Message to Send - +CMMS +CMMS –...

  • Page 132: Custom At Commands

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.5. Custom AT Commands 3.5.5.1. General Configuration AT Commands 3.5.5.1.1. Change Audio Path - #CAP #CAP - Change Audio Path Set command switches the active audio path depending on parameter <n> AT#CAP=[<n>] Parameter: <n>...
  • Page 133 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SRS - Select Ringer Sound Set command sets the ringer sound. AT#SRS= [<n>,<tout>] Parameters: <n> - ringing tone 0 - current ringing tone 1..max - ringing tone number, where max can be read by issuing the Test command AT#SRS=?.
  • Page 134 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SRP - Select Ringer Path Read command reports the selected ringer path in the format: AT#SRP? #SRP: <n>. Test command reports the supported values for the parameter <n>. AT#SRP=? Example AT#SRP=? #SRP: (0) AT#SRP=0...
  • Page 135 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #TONE - Tone Playback <tone> and <duration>. Tone Classes Volume 3.5.5.1.6. #TSVOL – Tone Classes Volume Set command is used to select the volume mode for one or more tone AT#TSVOL= <class>, classes.
  • Page 136 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #TSVOL – Tone Classes Volume Note: GSM Tones: DialToneId BusyToneId CongestionToneId RadioPathToneId CallWaitingToneId Ringer Tone: RingingToneMOId RingingToneMTId AutoRedialConnToneId Alarm Tones: AlarmToneId BatteryLowToneId SMSToneId MMSToneId PowerOnToneId PowerOffToneId NoUnitsLeftToneId Signaling Tones: classzeroToneId NetworkIndToneId NoServiceToneId SignallingErrToneId...
  • Page 137 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SHDN - Software Shutdown Execution command causes device detach from the network and shut down. AT#SHDN Before definitive shut down an OK response is returned. Note: after the issuing of this command any previous activity is terminated and the device will not respond to any further command.
  • Page 138 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 1 - triggers the measurement of the module internal temperature, reporting [,<GPIO>]]]] the result in the format: #TEMPMEAS: <level>,<value> where: <level> - threshold level -2 - extreme temperature lower bound (see Note) -1 - operating temperature lower bound (see Note) 0 - normal temperature 1 - operating temperature upper bound (see Note)
  • Page 139 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 010, 011, 100, 101, 110 and 111) <hyst_time> - hysteresis time: all the actions happen only if the extreme or operating bounds are maintained at least for this period. This parameter is needed and required if <action>...
  • Page 140 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #GPIO - General Purpose Input/Output Pin Control AT#GPIO =<pin>,<mode>[,<dir>] AT#GPIO=<pin>, Execution command sets the value of the general purpose output pin GPIO<pin> <mode>[,<dir>] according to <dir> and <mode> parameter. Parameters: <pin>...
  • Page 141 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #GPIO - General Purpose Input/Output Pin Control <pin>, <mode> and <dir>. Example 3.5.5.1.11. STAT_LED GPIO Setting - #SLED #SLED - STAT_LED GPIO Setting Set command sets the behaviour of the STAT_LED GPIO AT#SLED=<mode>...
  • Page 142 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #MONI - Cell Monitor <GSM network> 0..6 - it is the ordinal number of the cell, in a neighbour of the serving cell. 7 - it is a special request to obtain GSM-related information from the whole set of seven cells in the neighbour of the serving cell.
  • Page 143 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #MONI - Cell Monitor 0..7 <lac> - localization area code <id> - cell identifier (hexadecimal character format) <arfcn> - assigned radio channel <dBm> - received signal strength in dBm <timadv> - timing advance <psc>...
  • Page 144 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #RFSTS – Read current network Status 2825220 Cell ID (Hexadecimal character format). IMSI "450050203619261" International Mobile Station ID NetNameAsc "SKTelecom" Operation Name, Quoted string type Service Domain (0 : No Service, 1 : CS only, 2 : PS only, 3 : CS+PS) ABND Active Band...
  • Page 145 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #RFSTS – Read current network Status Note 1 : nAST : Number of active set. Maximum is 6 Note 2 : If <nAST> is 1, it means that number of active set is 1. In this case, the module does not display parameters <nUARFCN>,<nPSC>...
  • Page 146 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SERVINFO - Serving Cell Information <dBM> - received signal strength in dBm <NetNameAsc> - operator name, quoted string type <NetCode> - country code and operator code, hexadecimal representation <PSC> - Primary Synchronisation Code <LAC>...
  • Page 147 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.5.1.17. Digital/Analog Converter Control - #DAC #DAC - Digital/Analog Converter Control Set command enables/disables the DAC_OUT pin. AT#DAC= <enable> Parameters: [,<value>] <enable> - enables/disables DAC output. 0 - disables pin; it is in high impedance status (factory default) 1 - enables pin;...
  • Page 148 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #VAUX- Auxiliary Voltage Output Control Note: when <stat>=2 and command is successful, it returns: #VAUX: <value> where: <value> - power output status 0 - output off 1 - output on(factory default) Note: the current setting is stored through #VAUXSAV Read command reports whether the Auxiliary Voltage pin output is currently AT#VAUX?
  • Page 149 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CBC- Battery And Charger Status <ChargerState> - battery charger state 0 - charger not connected <BatteryVoltage> - battery voltage in millivolt: it is the real battery voltage only if charger is not connected; if the charger is connected this value depends on the charger voltage.
  • Page 150 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SHFEC - Handsfree Echo Canceller Note: This setting returns to default after power off. Read command reports whether the echo canceller function on audio handsfree AT#SHFEC? output is currently enabled or not, in the format: #SHFEC: <mode>...
  • Page 151 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SHFSD - Set Headset Sidetone Note: This setting returns to default after power off. Read command reports whether the headset sidetone is currently enabled or not, in AT#SHFSD? the format: #SHFSD: <mode>...
  • Page 152 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 <level> Parameter: <level>: handset analogue output gain 0..6 - handset analogue output (-3dB/step, factory default=0) Note: This parameter is saved in NVM issuing AT&W command. Read command returns the current handset analog output gain, in the format: AT#HSRECG? #HSRECG: <level>...
  • Page 153 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #PSAV - Audio Profile Configuration Save - speaker to micro signal power relation - noise reduction max attenuation - noise reduction weighting factor (band 300-500Hz) - noise reduction weighting factor (band 500-4000Hz) - AGC Additional attenuation - AGC minimal attenuation - AGC maximal attenuation...
  • Page 154 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #PSET - Audio Profile Setting <max_atten> - AGC maximal attenuation(TBD) Read command returns the parameters for the active profile in the format: AT#PSET? #PSET:<scal_in>,<scal_out>,<side_tone_atten>,<adaption_speed>, <filter_length>,<rxtxrelation>,<nr_atten>,<nr_w_0>,<nr_w_1>, <add_atten>,<min_atten>,<max_atten> It is not allowed if active audio profile is 0. Test command returns the supported range of values for the audio parameters.
  • Page 155 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.5.1.36. Handset Automatic Gain Control - #SHSAGC #SHSAGC - Handset Automatic Gain Control Set command enables/disables the automatic gain control function on audio handset AT#SHSAGC = input. <mode> Parameter: <mode> 0 - disables automatic gain control for handset mode (default) 1 - enables automatic gain control for handset mode Note: This parameter is saved in NVM issuing AT&W command.
  • Page 156 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SHSNR - Handset Noise Reduction Note: This parameter is saved in NVM issuing AT&W command. Read command reports whether the noise reduction function on audio AT# SHSNR? handset input is currently enabled or not, in the format: #SHSNR: <mode>...
  • Page 157 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #NITZ - Network Timezone <mode> 0 - disables #NITZ URC (factory default) 1 - enables #NITZ URC; after date and time updating the following unsolicited indication is sent: #NITZ: <datetime> where: <datetime>...
  • Page 158 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #BND - Select Band 1 - GSM 900MHz + PCS 1900MHz 2 - GSM 850MHz + DCS 1800MHz 3 - GSM 850MHz + PCS 1900MHz 4 - GSM 900MHz + DCS 1800MHz + PCS 1900MHz 5 - GSM 850MHz + DCS 1800MHz + GSM 900MHz + PCS 1900MHz <WCDMA band>: 0 - 2100MHz(FDD I)
  • Page 159 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #AUTOBND - Automatic Band Selection Note : Band selection will be followed #BND setting at next power-up when AT#AUTOBND=0 or AT#AUTOBND=1 is issued. Read command returns whether the automatic band selection is enabled or AT#AUTOBND? not in the form: #AUTOBND: <value>...
  • Page 160 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3 - antenna not detected (open). <urcmode> - URC presentation mode. It has meaning only if <mod> is 1. 0 - it disables the presentation of the antenna detection URC 1 - it enables the presentation of the antenna detection URC, whenever the antenna detection algorithm detects a change in the antenna status;...
  • Page 161 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #V24CFG - V24 Output Pins Configuration 0 - DCD (Data Carrier Detect) 1 - CTS (Clear To Send) 2 - RI (Ring Indicator) 3 - DSR (Data Set Ready) <mode> - AT commands serial port interface hardware pins mode: 0 - AT commands serial port mode: output pins are controlled by serial port device driver.
  • Page 162 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #V24 - V24 Output Pins Control #V24: <pin2>,<state2>[...]] where <pinn> - AT command serial port interface HW pin <staten> - AT commands serial port interface hardware pin state Test command reports supported range of values for parameters <pin> and <state>. AT#V24=? 3.5.5.1.47.
  • Page 163 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SRAT – Selection of Radio Access Technology < PreferredAct > 0 - RAT GSM 2 - RAT UMTS Note: Dual mode means GSM and UMTS Access Technology will be active and full InterRAT measurements and handovers are provided.
  • Page 164 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #REGSTAT - Current Network Registration Status where: <State> 0 - not registered 1 - registered, GPRS attached 2 - registered, EDGE attached 3 - registered, WCDMA attached 4 - registered, HSDPA attached // with DFS22.21.00, DFSD23.09.01 5 - registered, HSUPA attached // with DFS22.21.00, DFSD23.09.01 6 - registered, HSUPA and HSDPA attached Read command reports the current values of <n>...
  • Page 165 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CALLSTAT - Set Reporting Call Status Test command returns all supported values of the parameter. AT#CALLSTAT=? 3.5.5.1.52. GPRS cell environment description - #CGED #CGED – GPRS cell environment description This command returns a dump of the cell environment, either as a one shot dump or AT#CGED=<mode>...
  • Page 166 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CGED – GPRS cell environment description 6>,..., <par N>, MeasId:<meas_id>, EventId:, <par 3>, <par 4>, <par 5>, <par 6>,..., <par M>, etc... Process:CO, MMs:<mm_state>, MMSs:<mm_service_state>, MSC:<ms_class>, T:<active_timer_bitmap> Process:CS, MMs:<mm_state>, MMSs:<mm_service_state>, LUS:<location_update_status>, T:<active_timer_bitmap>, L:<limited_service>...
  • Page 167 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CGED – GPRS cell environment description UMTS: SC:<scrambling_code>, RSCP:<rscp>, ECN0:<ecn0>, DLF:<dl_frequency> Process:CO, MMs:<mm_state>, MMSs:<mm_service_state>, MSC:<ms_class>, T:<active_timer_bitmap> Process:CS, MMs:<mm_state>, MMSs:<mm_service_state>, LUS:<location_update_status>, T:<active_timer_bitmap>, L:<limited_service> Process:PS, MMs:<mm_state>, MMSs:<mm_service_state>, LUS:<location_update_status>, T:<active_timer_bitmap>, L:<limited_service>, GS:<gprs_supported>, R:<ready_state> Cell change counters: CRT:<cell_reselecetion_total>, IRCR:<ir_cell_reselection_counter>, AIRCR:<attempted_ir_cell_reselection>,IRHO:<ir_handover>,...
  • Page 168 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CGED – GPRS cell environment description range 0-7; 10.5.2.20 GSM04.08 <RxQualSub> - Received signal qual.onserving cell, measured on a subset of slots, range 0-7;10.5.2.20 GSM04.08 <ms_txpwr> - Maximum TX power level an MS may use when accessing the system until otherwise commanded, range 0-31;...
  • Page 169 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CGED – GPRS cell environment description octets); 10.5.2.29 GSM04.08 <t_adv> - Timing Advance, not used, always FFh <bs_pa_mfrms> - BS_PA_MFRMS (multiframes period for transmission of PAGING REQUEST), range 0-7 mapped to 2-9; 10.5.2.11 GSM04.08 <amr_acs>...
  • Page 170 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CGED – GPRS cell environment description <ext_upl_tbf_supported> - may be 0-1 <ccn_active> - may be 0-1 <pfc_feat_supported> - may be 0-1 <dl_sc> and <ul_sc> - current Modulation and Coding Scheme of downlink(<dl_sc>) or uplink(<ul_sc>) TBF may be: NB_CS_1 NB_CS_2...
  • Page 171 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CGED – GPRS cell environment description <urrcm_state> - indicated by three hex digits (1:event, 2:state, 3:nr of sent measurements) <as_error_code> - indication about error in UAS; integer, range 0-99 <release_cause> - integer, range 0-99 <out_of_service>...
  • Page 172 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CGED – GPRS cell environment description MEASUREMENT PARAMETERS: ---------------------- <meas_id> - one hex digit, range 0-FH <event_id> - two hex digits 1AH-3DH <par 3,4,5,…,M,..,N> - integer, range 0-99 GSM RR PARAMETERS: ------------------- <signal_failure/radio_link_counter>...
  • Page 173 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CGED – GPRS cell environment description AB_11 AB_11_E UMTS/GSM MM PARAMETERS: <mm_state> - integer, range 0-99 <mm_service_state> - integer, range 0-99 <ms_class> - the MS GPRS-class (previously stored in ATC either at reception of message MN_GCLASS_IND or sending the message MN_GCLASS_REQ);...
  • Page 174 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #CELLINFO – Provide Cell information For GSM cells: URC: #CELLINFO: <type>,<MCC>,<MNC>,<LAC>,<CI>,<RxLev>[,<t_advance>] For UMTS cells: URC: #CELLINFO: <type>,<MCC>,<MNC>,<LAC>,<CI>,<scrambling_code>, <dl_frequency>,<rscp>,<ecn0> where: <type> 0 - GSM serving cell 1 - GSM neighbour cell 2 - UMTS serving cell 3 - UMTS neighbour cell 4 - UMTS detected cell...
  • Page 175 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #DBGS – Debug screen command #DBGS: RAT:<rat>, MCC:<mobile_country_code>, MNC:<mobile_network_code>, MMs: <mm_state>, LUS: <location_update_status>, LAC: <LAC>, MMSs: <mm_service_state>, T: <active_timer_bitmap>, B: <band>, Only if RAT:”GSM” RR: <rr_state>, Arfcn: <arfcn>, Arfcn_ded: <arfcn_ded>, Bsic: <bsic>, Rssi: <rssi>, C1: <c1>, RxQualFull: <RxQualFull>, txpwr:<txpwr>, rx_power_level: <rx_power_level>,...
  • Page 176 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #DBGS – Debug screen command #DBGS: no_ncells: <no_ncells>, The next line is repeated by the number of neighbour GSM cells which have been found Arfcn:<arfcn>, Bsic: <bsic>, Rssi: <rssi>, C2: <c2>, no_umts:ncells: <no_umts_ncells>, The next line is repeated by the number of neighbour UMTS cells which have been found...
  • Page 177 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #DBGS – Debug screen command IrCr2g3gCntAt: <ir_cr_2g_3g_cnt_at>, IrHocc2g3gCntSu: <ir_hocc_2g_3g_cnt_su>, IrHocc2g3gCntAt: <ir_hocc_2g_3g_cnt_at>, Ho2g2gCntSu: <ho_2g_2g_cnt_su>, Ho2g2gCntAt: <ho_2g_2g_cnt_at>, Cr3g3gCntSu: <cr_3g_3g_cnt_su>, Cr3g3gCntAt: <cr_3g_3g_cnt_at>, IrCr3g2gCntSu: <ir_cr_3g_2g_cnt_su>, IrCr3g2gCntAt: <ir_cr_3g_2g_cnt_at>, IrHocc3g2gCntSu: <ir_hocc_3g_2g_cnt_su>, IrHocc3g2gCntAt: <ir_hocc_3g_2g_cnt_at>, Ho3g3gCntSu: <ho_3g_3g_cnt_su>, Ho3g3gCntAt: <ho_3g_3g_cnt_su>.
  • Page 178 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #DBGS – Debug screen command (2 bits); 10.5.2.37b GSM04.08 <NOM>NETWORK OPERATION MODE (GPRS_Cell_Options), range 0-3 (2 bits); 10.5.2.37b GSM04.08 <T3192>T3192 (Wait for Release of the TBF after reception of the final block), 12.24 GSM04.60 (range 0x0000 - 0xFFFF, 0xFFFF means invalid value) <PBCCH>...
  • Page 179 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #DBGS – Debug screen command UMTS=5 (unused), DTM=6, EGPRS_DTM=7, undefined=8 <no_ncells> - Number of GSM neighbour cells <no_umts_ncells> - Number of DETECTED UMTS cells (CELL_DCH) or Number of UMTS neighbour cells (all states but CELL_DCH) <rr_state>...
  • Page 180 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #DBGS – Debug screen command <ul_meas_cnt> - Number of measurements sent during the last reporting period <oos_cnt> - Number of times UE went out of service <tx_pwr> - Tx output power <ch_type>...
  • Page 181 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #DBGS – Debug screen command 0 - supported 1 - not supported <drx_cycle> - DRX cycle frame length <call_connect> 0 - If no call is active or hold. 1 - If at least 1 call is active or hold. <rssi_1>...
  • Page 182 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #DBGS – Debug screen command <ciphering> - ciphering dis-/enabled (0/1) (can only be changed via Phonetool) <integr_prot> - integrity protection dis-/enabled (0/1) (can only be changed via Phonetool) AT#DBGS? #DBGS: <mode>,<page_nr> where: <mode>...
  • Page 183 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #QSS - Query SIM Status 1 - SIM INSERTED 2 - enabled; the ME informs at every SIM status change through the following unsolicited indication: #QSS: <status> where: <status> - current SIM status 0 - SIM NOT INSERTED 1 - SIM INSERTED 2 - SIM INSERTED and PIN UNLOCKED...
  • Page 184 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +XSIMSTATE - Display SIM and Phonelock Status AT+XSIMSTATE=1 +XSIM: <SIM state><CR><LF> +XLOCK: […]<CR><LF> CME ERROR: <error> where: <mode> parameter sets the result code presentation in the TA: 0 disable 1 enable <SIM state>...
  • Page 185 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +XSIMSTATE - Display SIM and Phonelock Status 3 the lock is BLOCKED 4 the lock is DEACTIVE 5 the lock is DISABLED 6 the lock has just been AUTOACTIVATED <Lock result> parameter shows the result of the lock verification for <fac>...
  • Page 186 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #E2SMSRI - SMS Ring Indicator Reports the range of supported values for parameter <n> AT#E2SMSRI=? Example AT#E2SMSRI=50 3.5.5.1.60. Message Waiting Indication - #MWI #MWI - Message Waiting Indication Set command enables/disables the presentation of the message waiting indicator AT#MWI=<enable>...
  • Page 187 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #MWI - Message Waiting Indication <indicator> 1 - either Line 1 (CPHS context) or Voice (3GPP context) 2 - Line 2 (CPHS context) 3 - Fax 4 - E-mail 5 - Other <count>...
  • Page 188 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +XSVM – Set Voice mail Number Test command returns supported <line>s, <index>s, <mode>s and <type>s. AT+ XSVM=? +XSVM: (list of supported <line>s),(list of supported <mode>s),<nlength>,(list of supported <type>s) Example AT+XSVM=1,1,0,"123456",129 AT+XSVM? +XSVM: 1,1,0,"123456",129,"MBDN voice number1"...
  • Page 189 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #USERID - Authentication User ID #USERID: "myName" 3.5.5.1.64. Authentication Password - #PASSW #PASSW - Authentication Password Set command sets the user password string to be used during the authentication AT#PASSW= step.
  • Page 190 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #PKTSZ - Packet Size ->value automatically chosen by device 3.5.5.1.66. Data Sending Time-Out - #DSTO #DSTO -Data Sending Time-Out Set command sets the maximum time that the module awaits before sending AT#DSTO= anyway a packet whose size is less than the default one.
  • Page 191 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SKTTO - Socket Inactivity Time-Out Example AT#SKTTO=30 ->(30 sec. time-out) AT#SKTTO? #SKTTO: 30 3.5.5.1.68. Socket Definition - #SKTSET #SKTSET - Socket Definition Set command sets the socket parameters values. AT#SKTSET= [<socket type>, Parameters: <remote port>,...
  • Page 192 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SKTSET - Socket Definition Test command returns the allowed values for the parameters. AT#SKTSET=? Example AT#SKTSET=0,1024,"123.255.020.001" AT#SKTSET=0,1024,"www.telit.net" Note Issuing command #QDNS will overwrite <remote addr> setting. 3.5.5.1.69. Socket Open - #SKTOP #SKTOP - Socket Open Execution command activates the context number 1, proceeds with the AT#SKTOP...
  • Page 193 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #QDNS - Query DNS Note This command requires that the authentication parameters are correctly set and that the GPRS network is present. 3.5.5.1.71. Manual DNS Selection - #DNS #DNS – Manual DNS Selection Set command allows to manually set primary and secondary DNS servers AT#DNS=<cid>, for a PDP context defined by +CGDCONT...
  • Page 194 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.5.1.72. Socket TCP Connection Time-Out - #SKTCT #SKTCT - Socket TCP Connection Time-Out Set command sets the TCP connection time-out for the first CONNECT answer AT#SKTCT= from the TCP peer to be received. [<tout>] Parameter: <tout>...
  • Page 195 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.5.1.74. Socket Parameters Reset - #SKTRST #SKTRST - Socket Parameters Reset Execution command resets the actual socket parameters in the NVM of the device AT#SKTRST to the default ones. The socket parameters to reset are: - User ID - Password - Packet Size...
  • Page 196 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #GPRS - GPRS Context Activation Example AT#GPRS=1 +IP: 129.137.1.1 Now GPRS Context has been activated and our IP is 129.137.1.1 AT#GPRS=0 Now GPRS context has been deactivated, IP is lost. 3.5.5.1.76.
  • Page 197 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SKTD - Socket Dial Note: If all parameters are omitted then the behaviour of Set command is the same as Read command. Read command reports the socket dial parameters values, in the format: AT#SKTD? AT#SKTD: <socket type>,<remote port>,<remote addr>, <closure type>,<local port>...
  • Page 198 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SKTL - Socket Listen When a connection request comes on the input port, if the sender is not filtered by the internal firewall (see command #FRWL), an unsolicited code is reported: +CONN FROM: <remote addr>...
  • Page 199 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SKTL - Socket Listen send escape sequence NO CARRIER Now listen is not anymore active to stop listening AT#SKTL=0,0,1024, 255 Note The main difference between this command and #SKTD is that #SKTL does not contact any peer, nor does any interaction with the GPRS context status, leaving it ON or OFF according to the #GPRS setting, therefore when the connection made with #SKTL is closed the context (and hence the local IP address) is maintained.
  • Page 200 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #FRWL - Firewall Setup IP address mask in the format: xxx.xxx.xxx.xxx Command returns OK result code if successful. Note: the firewall applies for incoming (listening) connections only. Firewall general policy is DROP, therefore all packets that are not included into an ACCEPT chain rule will be silently discarded.
  • Page 201 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #TCPMAXDAT – Maximum TCP Payload Size Set command allows to set the maximum TCP payload size in TCP header AT#TCPMAXDAT= options. <size> Parameter: <size> - maximum TCP payload size accepted in one single TCP/IP datagram;...
  • Page 202 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.5.2. Multisocket AT Commands 3.5.5.2.1. Socket Status - #SS #SS - Socket Status Execution command reports the current status of the sockets in the format: AT#SS[=<connId>] #SS: <connId>,<state>,<locIP>,<locPort>,<remIP>,<remPort> [<CR><LF><connId>,<state>,<locIP>,<locPort>,<remIP>,<remPort> […]] where: <connId>...
  • Page 203 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SI - Socket Info socket connection identifier, as before <connId> <sent> - total amount (in bytes) of sent data since the last time the socket connection identified by <connId> has been opened <received>...
  • Page 204 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SGACT - Context Activation <stat>[,<userId>[, Parameters: <pwd>]] <cid> - PDP context identifier 1..5 - numeric parameter which specifies a particular PDP context definition <stat> 0 - deactivate the context 1 - activate the context <userId>...
  • Page 205 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SCFG - Socket Configuration <connId>,<cid>, Parameters: <pktSz>,<maxTo>, <connId> - socket connection identifier <connTo>,<txTo> 1..6 <cid> - PDP context identifier 1..5 - numeric parameter which specifies a particular PDP context definition <pktSz>...
  • Page 206 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SCFGEXT - Socket Configuration Extended Set command sets the socket configuration extended parameters. AT#SCFGEXT= Parameters: <connId>, <connId> - socket connection identifier <srMode>, 1..6 <dataMode>, <srMode> - SRing URC mode <keepalive> 0 - normal mode (default): [,<unused_A>...
  • Page 207 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SCFGEXT - Socket Configuration Extended Example Socket 1 set with data view sring, text data mode and a keepalive time of 30 minutes. Socket 3 set with data amount sring, hex data mode and no keepalive.
  • Page 208 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SD - Socket Dial effect (if used) for TCP connections. Note: if we set <connMode> to online mode connection and the command is successful we enter in online data mode and we see the intermediate result code CONNECT.
  • Page 209 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SA - Socket Accept Note: the SRING URC has to be a consequence of a #SL issue Test command reports the range of values for all the parameters. AT#SA=? 3.5.5.2.9. Socket Restore - #SO #SO - Socket Restore Execution command resumes socket connection which has been suspended by the...
  • Page 210 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SL - Socket Listen If the socket is closed by the network the following URC is received: #SKTL: ABORTED Read command returns all the actual listening sockets. AT#SL? Test command returns the range of supported values for all the subparameters. AT#SL=? Example at#scfg?
  • Page 211 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SRECV – Received Data in Command Mode SRING URC (<srMode> be 2, <dataMode> be 0) displaying (in text format) 15 bytes data that have just come through connected socket identified by <connId>=3; it’s no necessary to issue #SRECV to read the data;...
  • Page 212 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SSEND EXT– Send Data in Command Mode extended Execution command permits, while the module is in command mode, to send data AT#SSENDEXT= through a connected socket including all possible octets(from 0x00 to 0xFF) <connId>, <bytestosend>...
  • Page 213 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #SLUDP - Socket Listen UDP 1 - starts socket listening <listenPort> - local listening port 1..65535 Note: if successful, commands returns a final result code OK . Then, when there’s an incoming UDP connection on the local port and if the sender is not filtered by internal firewall (see #FRWL), an URC is received: SRING : <connId>...
  • Page 214 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #FTPOPEN - FTP Open Execution command opens an FTP connection toward the FTP server. AT#FTPOPEN= [<server:port>, Parameters: <username>, <server:port> - string type, address and port of FTP server (factory default port <password>, 21).
  • Page 215 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #FTPGET - FTP Get starts getting a file from the FTP server. [<filename>] If the data connection succeeds a CONNECT indication is sent, otherwise a NO CARRIER indication is sent. The file is received on the serial port.
  • Page 216 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #FTPDELE - FTP Delete Note: The command causes an ERROR result code to be returned if no FTP connection has been opened yet. Test command returns the OK result code. AT#FTPDELE=? 3.5.5.3.9.
  • Page 217 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 3.5.5.4. GPS AT Commands Set 3.5.5.4.1. GPS Controller Power Management - $GPSP $GPSP - GPS Controller Power Management Set command allows to manage power-up or down of the GPS controller AT$GPSP=<status>...
  • Page 218 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 $GPSAT - GPS Antenna Type Definition Set command selects the GPS antenna used. Parameter: <type> 0 - GPS Antenna AT$GPSAT=<type> not power supplied by the module 1 - GPS Antenna power supplied by the module (default) Note: the current setting is stored through $GPSSAV Read command returns the currently used antenna, in the format: AT$GPSAT?
  • Page 219 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 $GPSNMUN - Unsolicited NMEA Data Configuration 1 – enable <GSV> - GPS Satellites in View 0 - disable (default) 1 – enable <RMC> - Global Positioning System Fix Data 0 - disable (default) 1 –...
  • Page 220 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #STIA – SIMTOOLKIT Activation Interface 1 – USB0 2 – USB3 Note 1: every time the SIM application issues a proactive command that requires user interaction an unsolicited code will be sent, if enabled with #STIA command, as follows: [URC type 1 : +STKPRO] +STKPRO command displays the list of supported proactive commands.
  • Page 221 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #STIA – SIMTOOLKIT Activation Interface - 05: Idle screen available event - 07: Language selection - 08: Browser Termination event <hex_string> sting containing data in hexadecimal format <icon_id>,<icon_id1>,<icon_id2> ,<icon_id_list_element> icon identifier list object (list containing icon id’s.
  • Page 222 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #STIA – SIMTOOLKIT Activation Interface <unit> may be: - 0: minutes - 1: seconds - 2: tenth of seconds <URL> URL that shall be loaded [URC type 2 : +STKCC] SIM-APPL-TK Call Control Commands +STKCC The SIMAP call control status is displayed using the unsolicited result code +STKCC: <cc_comand>…...
  • Page 223 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 #STIA – SIMTOOLKIT Activation Interface NVM. #STIA=<mode>, <devpath> Test command returns the supported range of values for parameters AT#STIA? #STIA=<mode>, <devpath> 3.5.5.5.2. SIMTOOLKIT Browser Request - +STKBR +STKBR – SIMTOOLKIT Browser Request AT+STKBR= This command allows to enter a response to a SIM -APPL-TK launch browser request.
  • Page 224 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +STKTR – SIMTOOLKIT Terminal Response The parameters depend on the proactive command: +STKTR: 01, <result>, [<add_result>] refresh +STKTR: 05, <result> set up event list +STKTR: 16, <result>, [<add_result>] set up call +STKTR: 17, <result>, <add_result>...
  • Page 225 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +STKTR – SIMTOOLKIT Terminal Response - 35: user cleared down call before connection or network release - 36: action in contradiction with the current timer state - 37: interaction with call control by SIM, temporary problem - 38: launch browser generic error code - 48: command beyond ME’s capabilities - 49: command type not understood by ME...
  • Page 226 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 +STKENV – SIMTOOLKIT Envelop command <help_requested> indicates help requested and may be: - 1: help is requested - 0: help is not requested <language> currently used language in the DTE (coding see 11.14) Test command returns the OK result code AT+STKENV=? 3.5.5.5.5.

  • Page 227: Acronyms And Abbreviations

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 ACRONYMS AND ABBREVIATIONS Absolute Radio Frequency Channel Number ARFCN Attention command BCCH Allocation Broadcast Control Channel BCCH Cell Allocation Cell Broadcast Message Cell Broadcast Service Current Call Meter Calling Line Identification Restriction CLIR Clear To Send Closed User Group...
  • Page 228 HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 Packet Data Unit Personal Identification Number Point to Point Protocol Pin Unblocking Code Radio Link Protocol Recommended minimum Specific data Request To Send SIM Access Profile Service Center Address Short Message Service Short Message Service Center SMSC Simple Mail Transport Protocol...

  • Page 229: Document History

    HE863 family AT commands reference guide 80377ST10083a Rev.6 – 2012-11-12 Document History Revision Date Changes 2010-11-26 First issue 2011-02-24 Updated first feature completed version 2011-09-08 Updated for AT&T IOT for HE863-NAD 2011-12-21 Updated for AT&T IOT for HE863-NAR Update for 11.00.xx2 for HE863-EUD/EUR/AUD/AUR 2012-02-01 Updated for 11.00.xx2 for HE863-NAG/EUG/AUG 2012-08-01...

This manual is also suitable for:

He863-eugHe863-eudHe863-eurHe863-nadHe863-nagHe863-nar ... Show all

Table of Contents