How To Install The Oven (60 Hz Models Without Cords Or Plugs) - Alto-Shaam Vector VMC-F3E Operator's Manual

I
NSTALLATION
How to Install the Oven
Before you begin
Requirements
Voltages
22
Make sure you have:
Screwdriver (Phillips #2)
▪
Nut driver (1/4-inch)
▪
An appropriate lifting device, and enough personnel, to safely move and position
▪
the weight of the oven.
VMC-F3E: 472 lb (214 kg)
□
VMC-F4E: 599 (272 kg)
□
The oven must be installed on a level surface.
▪
The oven must not be installed in any area where it may be affected by steam,
▪
grease, dripping water, high temperature, or any other severely adverse
conditions.
The oven is not intended for built-in installation.
▪
V
VMC-F3E 208–240
380–415
VMC-F4E 208–240
380–415
*Electrical connections must meet all applicable federal, state, and local codes.
(60 Hz Models Without Cords or Plugs)
Ph Hz A
3 60 31–35
3 50/60 32–35
3 60 41–46
3 50/60 42–46
Ve ctor ™ F Series O p e r a tor' s Man u a l
▪
Breaker* kW
50 11.2 - 14.5
50 12.2 - 14.5
60 14.8 - 19.2
60 16.2 - 19.8
MN-39279 Rev 01 5 /18
▪ ▪ ▪