Alto-Shaam Vector VMC-H2 Operator's Manual
  1. Manuals
  2. Brands
  3. Alto-Shaam Manuals
  4. Oven
  5. Vector VMC-H2
  6. Operator's manual

Alto-Shaam Vector VMC-H2 Operator's Manual

Multi-cook oven, simple control
Hide thumbs Also See for Vector VMC-H2:
Table of Contents

Advertisement

Quick Links

See also: Service Manual
MN-46548-EN
REV.01
11/19
EN
alto-shaam.com
Operator's Manual
Vector™ Multi-Cook Oven
Structured Air Technology™
Simple Control
VMC-H2
VMC-H2H
VMC-H3
VMC-H3H
VMC-H4
VMC-H4H

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Vector VMC-H2 and is the answer not in the manual?

Questions and answers

Related Manuals for Alto-Shaam Vector VMC-H2

Summary of Contents for Alto-Shaam Vector VMC-H2

  • Page 1 Operator’s Manual Vector™ Multi-Cook Oven Simple Control VMC-H2 VMC-H2H VMC-H3 VMC-H3H VMC-H4 VMC-H4H Structured Air Technology™ MN-46548-EN REV.01 11/19 alto-shaam.com...

  • Page 2: Manufacturer's Information

    © Copyright 11/19 by Alto-Shaam, Inc. All rights reserved. This manual or any portion thereof may not be reproduced or used in any manner whatsoever without the express written permission of Alto-Shaam, Inc. Trademarks All trademarks referenced in this documentation are the property of their respective owners.

  • Page 3: Foreword

    OREWORD Enjoy your Alto-Shaam Vector Oven! Structured Air The Alto-Shaam Vector Oven features Structured Air Technology, giving you two, Technology™ three or four ovens in one. It gives you the flexibility to simultaneously cook a variety of menu items with no flavor transfer. It provides the ability to control temperature, fan speed, and time in each individual oven chamber.
  • Page 4 OREWORD This page intentionally left blank. Ve ct o r H™ Se r i es Op e ra to r ’ s Ma n u al MN- 4 65 4 8 Re v 1 1 1/ 1 9 ▪ ▪ ▪...

  • Page 5: Table Of Contents

    Foreword Enjoy your Alto-Shaam Vector Oven! ....3 Extend Your Manufacturer’s Warranty ....3 Alto-Shaam 24/7 Emergency Repair Service .
  • Page 6 ABLE OF ONTENTS How to Change the Sound Settings....74 How to Change the Temperature Scale ....75 How to Set the Cleaning Timer .

  • Page 7: Safety

    AFETY The Meaning of Signal Words This manual contains signal words where needed. These signal words must be obeyed to reduce the risk of death, personal injury, or equipment damage. The meaning of these signal words is explained below. DANGER Danger indicates a hazardous situation which, if not avoided, will result in serious injury or death.

  • Page 8: Appliance Description And Intended Use

    AFETY Appliance Description and Intended Use Structured Air Alto-Shaam Vector’s Structured Air Technology system allows for multiple, Technology™ unique cooking chambers within the same oven. Air is delivered by a blower located in the rear of each cooking chamber. Air travels vertically through the jet plates into each chamber.

  • Page 9: Safety Precautions

    AFETY Safety Precautions Before you begin Read and understand all instructions in this manual. Electrical precautions Obey these electrical precautions when using the appliance: ▪ Connect the appliance to a properly grounded outlet. Do not use the appliance if it is not properly grounded. Consult an electrician if there is any doubt that the outlet used is properly grounded.
  • Page 10 Only trained personnel are permitted to service or repair the appliance. Repairs that are not performed by an authorized service partner or trained technician, or appliance the use of non-factory parts, will void the warranty and relieve Alto-Shaam of all liability. ▪...
  • Page 11 AFETY Personal Protective Wear the following Personal Protective Equipment (PPE) while cleaning the Equipment (PPE) appliance: ▪ Protective gloves ▪ Protective clothing ▪ Eye protection ▪ Face protection Ve ct or H™ Se r i es Op e ra to r ’ s Ma n u al M N- 46 5 4 8 Re v 1 1 1/ 1 9...
  • Page 12 AFETY This page intentionally left blank. Ve ct o r H™ Se r i es Op e ra to r ’ s Ma n u al MN- 4 65 4 8 Re v 1 1 1/ 1 9 ▪ ▪ ▪...

  • Page 13: Labels

    ABELS Label Locations j klmn VMC-PHD-006220 Ve ct or H™ Se r i es Op e ra to r ’ s Ma n u al M N- 46 5 4 8 Re v 1 1 1/ 1 9 ▪ ▪ ▪...
  • Page 14 51mm 51mm 51mm LA-38994 Every Alto-Shaam product is precision calibrated prior to release from the factory to ensure accurate temperature control. Ve ct o r H™ Se r i es Op e ra to r ’ s Ma n u al...
  • Page 15 ABELS WARNING Hot surface Made in U.S.A. WARNING WARNING / ADVERTENCIA / AVERTISSEMENT Burn hazard Burn hazard. Always load liquids, or foods that can become liquid when heated, at an eye level where they can be seen. Peligro de quemaduras. Siempre coloque líquidos, o alimentos que Always load liquids, or foods that can become liquid se puedan volver líquidos cuando se calientan, a nivel de los ojos donde se puedan ver.
  • Page 16 ABELS Line 3 supply terminal LA-36443-L3 Neutral LA-36443-N Ground terminal LA-36443-G Equipotential terminal LA-36443-E Press and release the high limit temperature reset button(s). VMC-H2, VMC-H3, VMC-H4 VMC-F3, VMC-F4 VMC-H2H, VMC-H3H, VMC-H4H LA-39715 Ve ct o r H™ Se r i es Op e ra to r ’...

  • Page 17: Installation

    NSTALLATION Dimension Drawings VMC-H2: 37-1/2" (953mm) H2, H3, H4: 54-3/8" (1382mm) VMC-H2H: 39-1/2" (1003mm) H2H, H3H, H4H: 56-3/8" (1432mm) 21-1/2" VMC-H2: 34-11/16" (882mm) 19-9/16" (546mm) VMC-H2H: 36-11/16" (932mm) (498mm) 14-11/16" (373mm) 3-3/4" electrical connection (94 mm) electrical connection 4-5/16" (109mm) 16-3/8"...

  • Page 18: How To Receive The Appliance

    Alto-Shaam policy It is the policy of Alto-Shaam to assist customers in collecting claims that have been properly filed and actively pursued. Alto-Shaam cannot, however, file damage claims, assume the responsibilities for damage claims, or accept deductions in payment for damage claims.

  • Page 19: How To Unpack The Oven

    Examine the appliance for damage. If the appliance has been damaged, do not use the appliance until it has been inspected by an authorized service provider. Contact your carrier or Alto-Shaam customer service. Remove the shrink wrap. the restraining straps.

  • Page 20: Vector Pre-Installation Checklist

    NSTALLATION Vector Pre-Installation Checklist Installation of the oven is to be completed only by an authorized Alto-Shaam service partner. Place this form with the oven’s records. WARNING: Electric shock and arc flash hazard. Use caution when measuring line voltage and line current.
  • Page 21 NSTALLATION Continued from previous page Electrical Alto-Shaam oven ratings Breaker: Voltage: Phase: The following fields must be completed by the service technician on site. What is the measured voltage at the site? L1-N: L2-N: L3-N: L1-L2: L2-3: L1-L3: Pass Fail...
  • Page 22 NSTALLATION Continued from previous page Other site information Is there a proper ventilation hood installed above where the oven(s) will be installed? Pass Fail (If required) Does the designated location for the oven have a level surface, i.e., no more than 1.5” Pass Fail (38mm) change in elevation from its highest to lowest surface point?
  • Page 23 On-site manager should make the necessary contacts to move forward with these changes as soon as possible. If there are any questions, please contact Alto-Shaam Technical Service Department at 800-558- 8744 ext. 6702. Or, review documentation regarding the equipment www.alto-shaam.com/en/resource-library.

  • Page 24: Installation Checklist

    NSTALLATION Installation Checklist Installation of the oven is to be completed only by an authorized Alto-Shaam service partner. Place this form with the oven’s records. WARNING: Electric shock and arc flash hazard. Use caution when measuring line voltage and line current.
  • Page 25 NSTALLATION Continued from previous page Electrical: Record Measure the voltage at the wall outlet. L1 to L2: L1 to L3: L2 to L3: Measure the voltage at the oven’s main disconnect switch. L1 to L2: L1 to L3: L2 to L3: Measure the voltage at the oven’s main terminal block.

  • Page 26: How To Install The Oven (60 Hz Cord And Plug Models)

    NSTALLATION How to Install the Oven (60 Hz Cord and Plug Models) Before you begin Make sure you have: ▪ An appropriate lifting device, and enough personnel, to safely move and position the weight of the oven. VMC-H2/H2H: 213 lb (97 kg) □...
  • Page 27 NSTALLATION Continued from previous page Position the oven To position the oven, do the following. Step Action Make sure that: The location where the oven is being installed is rated to support the ▪ weight of the oven; The oven is within five feet (1.5m) of the appropriate electrical outlet; ▪...
  • Page 28 NSTALLATION Continued from previous page Connect power To connect electric power to the oven, do the following. the main disconnect switch to the OFF position. VMC-TS-006236 Connect the plug to the electrical outlet. NEMA 6-50P NEMA 15-50P NEMA 6-30P VMC-TS-000318 Press reset button(s) Press and release the high limit temperature reset button(s)

  • Page 29: How To Install The Oven (60 Hz Models Without Cords Or Plugs)

    NSTALLATION How to Install the Oven (60 Hz Models Without Cords or Plugs) Before you begin Make sure you have: ▪ Appropriate cord and plug. See local codes and regulations. ▪ Screwdriver (Phillips #2) ▪ Nut driver (1/4-inch) ▪ An appropriate lifting device, and enough personnel, to safely move and position the weight of the oven.
  • Page 30 NSTALLATION Continued from previous page Position the oven To position the oven, do the following. Step Action Make sure that: The location where the oven is being installed is rated to support the ▪ weight of the oven, The oven is within five feet of the appropriate electrical outlet, ▪...
  • Page 31 NSTALLATION Continued from previous page Connect the wiring To connect the wiring, do the following. Remove the pivot screws. Remove the top cover WARNING: Electric shock hazard. Make sure the supply cord is not connected to a power supply. VMC-TS-007943 Remove the bottom 3 screws from the mounting bracket.
  • Page 32 NSTALLATION Continued from previous page Connect the supply cord to the appropriate terminals (L1, L2, L3, etc.) in accordance with local codes and regulations. VMC-H2 VMC-H2H VMC-H3 VMC-H3H VMC-TS-001821 VMC-H3 VMC-H3H VMC-H4 VMC-H4H VMC-TS-001825 Continued on next page Ve ct o r H™ Se r i es Op e ra to r ’...
  • Page 33 NSTALLATION Continued from previous page Install the ground wire Adjust the cord length. Tighten the cord grip sealing nut onto the supply cord. VMC-TS-001829 Re-install the main disconnect switch. Re-install the mounting bracket. Re-install the top cover. Press reset button(s) Press and release the high limit temperature reset button(s) Remove...

  • Page 34: How To Install The Oven (50 Hz Models Without Cords Or Plugs)

    NSTALLATION How to Install the Oven (50 Hz Models Without Cords or Plugs) Before you begin Make sure you have: ▪ Appropriate cord and plug, minimum oil resistant HO7RN-F. See local codes and regulations. ▪ Screwdriver (Phillips #2) ▪ Nut driver (1/4-inch) ▪...
  • Page 35 NSTALLATION Wire sizes 60335-1 IEC:2010 Rated current of appliance Nominal cross-sectional area >0.2 – ≤3 >3 – ≤0 0.75 >6 – ≤10 >10 – ≤16 >16 – ≤25 >25 – ≤32 >32 – ≤40 >40 – ≤63 Position the oven To position the oven, do the following.
  • Page 36 NSTALLATION Continued from previous page Level the oven To level the oven, do the following. Check the level of the oven using a spirit (bubble) level. Check front to back and side to side. VMC-TS-007501 Adjust the legs, if necessary, to achieve levelness. The oven is now level.
  • Page 37 NSTALLATION Continued from previous page Remove the bottom 3 screws from the mounting bracket. Remove the main disconnect switch from the mounting bracket. VMC-TS-001815 Install the cord through the cord grip Install the cord and cord grip into the oven. Install the lock nut onto the cord grip.
  • Page 38 NSTALLATION Continued from previous page Install the ground wire Leave an extra loop so that current-carrying conductors become taut before the ground wire if the cord is accidentally pulled. Follow applicable regulations. Tighten the cord grip sealing nut onto the supply cord. VMC-TS-002875 VMC-TS-007997 ...
  • Page 39 NSTALLATION Continued from previous page Press reset button(s) Press and release the high limit temperature reset button(s) Remove the tag VMC-H2, VMC-H3, VMC-H4 VMC-H2H, VMC-H3H, VMC-H4H LA-39715 VMC-TS-007954 Result The oven is now installed. Ve ct or H™ Se r i es Op e ra to r ’...

  • Page 40: How To Install The Oven On A Stand

    NSTALLATION How to Install the Oven on a Stand Before you begin Make sure you have: ▪ The appropriate stand for your oven ▪ Regulation UL 197, 91.8 ▪ An appropriate lifting device, and enough personnel, to safely move and position the weight of the oven.
  • Page 41 NSTALLATION Continued from previous page Install wheels on To install the casters on the lower oven, do the following. lower oven Attach each caster with fasteners as shown. VMC-TS-008006 Level the unit as necessary. To do so, screw the wheel up or down until the unit is level.
  • Page 42 NSTALLATION This page intentionally left blank. Ve ct o r H™ Se r i es Op e ra to r ’ s Ma n u al MN- 4 65 4 8 Re v 1 1 1/ 1 9 ▪ ▪ ▪...

  • Page 43: Operation

    PERATION How to Turn On and Turn Off the Oven Before you begin The oven must be connected to electric power. Turning on the oven To turn on the oven, do the following. Step Action the main disconnect switch to the ON position. Press the ON/OFF button .

  • Page 44: How To Set Preheat Temperatures

    PERATION How to Set Preheat Temperatures ▪ Before you begin The oven must be turned on (screen is on). ▪ Factory preset preheat temperature for each chamber is 350°F. ▪ You will need to know the pass code. The pass code set at the factory is 12345. Procedure To set the preheat temperatures, do the following.
  • Page 45 PERATION Continued from previous page Touch the Temps icon . The Enter Pass Code screen displays. Enter the pass code 12345. Touch the check mark. The Set Preheat Temperatures screen displays. User Configuration Enter Pass Code 1 2 3 4 5 # 1 2 3 °F 4 5 6...
  • Page 46 PERATION Continued from previous page Touch the up arrow then the back arrow to return to the home screen. User Configuration User Configuration °F Temps Temp Sounds Logs Recipes Clean Oven Info Auto Cool VMC-TS-007762 Result The preheat temperatures have now been set. Ve ct o r H™...

  • Page 47: How To Preheat The Oven

    PERATION How to Preheat the Oven ▪ Before you begin The oven must be connected to electric power. ▪ The oven chambers should be empty. All chambers To preheat all chambers simultaneously, do the following. simultaneously Step Action Touch the Preheat icon .
  • Page 48 PERATION Continued from previous page Screen loading bars On the left side of the screen, red screen loading bars indicate each chamber’s progress towards reaching its set temperature. WAIT... Preheating PREHEATING PREHEATING 400°F WAIT... Set Temp PREHEATING PREHEATING WAIT... 350°F PREHEATING PREHEATING Actual Temp...

  • Page 49: How To Cook In Manual Mode

    PERATION How to Cook in Manual Mode ▪ Before you begin Be sure the oven is warmed up. Refer to topic How to Preheat the Oven. ▪ The Manual function must be enabled. See topic How to Enable Manual Mode, Linking, and Set Temp Function.
  • Page 50 PERATION Continued from previous page Touch Air Speed Enter the air flow in percentage 10%–100% using the Touch number pad. the check mark.  NOTE: The Air Speed icon will flash until a value is entered. You must enter values for time, temperature, and air speed.

  • Page 51: How To Use The Dual Timers

    PERATION How to Use the Dual Timers ▪ Before you begin Refer to topic How to Cook in Manual Mode Background There may be times when you will want to use the same chamber to cook two pans of food at the same time, but at different intervals. The dual timer function allows you to do so.
  • Page 52 PERATION Continued from previous page Touch the temperature setting Enter the cooking temperature using the Touch number pad. the check mark. Enter Temperature (°F) Enter Temperatu READY 15:00 350°F Manual 1 2 3 00:00 READY 4 5 6 350°F Manual 350°F READY 7 8 9...
  • Page 53 PERATION Continued from previous page Open the door and load pan 2 when it is ready. Close the door. Touch the start icon . The timer for pan 2 will start counting. Pressing the X icon stops the timer. The timer resets to 0. ...

  • Page 54: How To Cook With Programmed Recipes

    PERATION How to Cook with Programmed Recipes ▪ Before you begin Be sure the oven is preheated ▪ Be sure your food is prepared and ready to cook Procedure To cook using a programed recipe, do the following. Step Action Select the chamber .
  • Page 55 PERATION Continued from previous page During the cooking The screen indicates the time remaining. process Cooking 8:08 Biscuits Biscuits READY Stage Time Temp 350°F Program READY READY READY READY 300°F Program READY 225°F Program VMC-TS-007813 ▪ The menu area displays details on the current cook setting. ▪...

  • Page 56: How To Cook With Linked Chambers

    PERATION How to Cook with Linked Chambers ▪ Before you begin The selected chambers must be warmed up to the temperature of the recipe. Refer to topic How to Preheat the Oven. ▪ The Link function must be enabled. See topic How to Enable Manual Mode, Linking, and Set Temp Function.
  • Page 57 PERATION Continued from previous page Cooking with linked To cook with linked chambers, do the following. chambers Navigate to the recipe using the arrow icons Ready to Cook READY 350°F Program Preheat Link Bacon READY French to 350°F Program Fried eggs READY Biscuits Biscuits...

  • Page 58: How To Create And Edit Recipes

    PERATION How to Create and Edit Recipes Before you begin You will need to know the pass code. The pass code set at the factory is 12345. Procedure To create or edit a recipe, do the following. Step Action Touch the gear icon .
  • Page 59 PERATION Continued from previous page Touching the new recipe icon or touching an existing recipe allows access to the following: Recipe name ▪ Temperature for each stage ▪ Time for each stage ▪ Air speed for each stage ▪ Number of stages (By default, stages 2 and 3 have a length of zero.) ▪...

  • Page 60: How To Create And Edit Recipe Folders

    PERATION How to Create and Edit Recipe Folders Before you begin You will need to know the pass code. The pass code set at the factory is 12345. Procedure To create or edit a recipe folder, do the following. Step Action Touch the gear icon...
  • Page 61 PERATION Continued from previous page Create a new folder or edit an existing folder. Touch the recipes you want to add to the folder. Edit Folder Edit Folder New Folder Edit Folder Touch a recipe to add or remove from folder Touch a recipe to add or remove from folder Touch here to create folder name Name:...

  • Page 62: How To Load Recipes From A Usb Drive

    PERATION How to Load Recipes from a USB Drive ▪ Before you begin You will need a USB drive loaded with recipes. ▪ You will need to know the pass code. The pass code set at the factory is 12345. Procedure To load recipes from the USB drive, do the following.
  • Page 63 PERATION Continued from previous page Touch Load Recipes . The Enter Pass Code screen displays. Enter the pass code 12345 Touch the check mark USB Functions Enter Pass Code 1 2 3 4 5 # 1 2 3 4 5 6 Load Update IB Update CB...

  • Page 64: How To Save Recipes To A Usb Drive

    PERATION How to Save Recipes to a USB Drive ▪ Before you begin You will need a USB drive. ▪ You will need to know the pass code. The pass code set at the factory is 12345. Procedure To download recipes from the oven to a USB drive, do the following. Step Action Touch...
  • Page 65 PERATION Continued from previous page Touch Save Recipes . The Enter Pass Code screen displays. Enter the pass Touch code 12345 the check mark USB Functions Enter Pass Code Enter Pass Co 1 2 3 4 5 # 1 2 3 4 5 6 Load Update CB...

  • Page 66: How To Turn On And Turn Off The Chambers

    PERATION How to Turn On and Turn Off the Chambers Before you begin The oven must be connected to electric power. Turning off a To turn off a chamber, do the following. chamber Step Action Touch and hold the chamber icon .

  • Page 67: How To Enable Auto Cool

    PERATION How to Enable Auto Cool ▪ Before you begin The oven must be turned on (screen is on). ▪ You will need to know the pass code. The pass code set at the factory is 12345. Background There may be times when you want the oven to automatically cool down at a set time.
  • Page 68 PERATION Continued from previous page Touch the Enable Auto Cool icon Auto Cool Auto Cool VMC-TS-007979 Touch the hour time setting Enter the cool down time using the number Touch the check mark Repeat the process to set the minute time setting. Touch the check mark to save.

  • Page 69: How To Enable Manual Mode, Linking, And Set Temp Function

    PERATION How to Enable Manual Mode, Linking, and Set Temp Function Before you begin ▪ The oven must be turned on (screen is on). ▪ You will need to know the pass code. The pass code set at the factory is 12345. Procedure To enable the Set Temp, Linking, or Manual mode, do the following.
  • Page 70 PERATION Continued from previous page Touch the function you want to enable: Set Temp, Link, or Manual icon The Enter Pass Code screen displays. Enter the pass code 12345 Touch the check mark . The selected function will now be enabled. Repeat the process to disable the function.

  • Page 71: How To Enable Auto Preheat

    PERATION How to Enable Auto Preheat ▪ Before you begin The oven must be turned on (screen is on). ▪ You will need to know the pass code. The pass code set at the factory is 12345. Background There may be times when you want the oven to preheat to preset temperatures when the oven is turned on.
  • Page 72 PERATION Continued from previous page Touch the Auto Preheat icon The Enter Pass Code screen displays. Enter the pass code 12345 Touch the check mark . The selected function will now be enabled. Repeat the process to disable the function. User Configuration Enter Pass Code 1 2 3 4 5 #...

  • Page 73: How To Change The Time And Date Settings

    PERATION How to Change the Time and Date Settings Procedure To change the time and date settings, do the following. Step Action Touch the gear icon . The User Configuration screen displays. User Configuration Ready to Cook Preheat Bacon French toast Service Sounds Time...

  • Page 74: How To Change The Sound Settings

    PERATION How to Change the Sound Settings Procedure To change the sound settings, do the following. Step Action Touch the gear icon . The User Configuration screen displays. User Configuration Ready to Cook Preheat Bacon French toast Service Sounds Time Fried eggs Biscuits Logs...

  • Page 75: How To Change The Temperature Scale

    PERATION How to Change the Temperature Scale Procedure To change the temperature scale from °F to °C and vice versa, do the following. Step Action Touch the gear icon . The User Configuration screen displays. User Configuration Ready to Cook Preheat Bacon French toast...

  • Page 76: How To Set The Cleaning Timer

    PERATION How to Set the Cleaning Timer Before you begin To help you remember when to clean the oven, the number of hours until the next cleaning may be programmed into the controller. Procedure To set the cleaning timer, do the following. Step Action Touch...
  • Page 77 PERATION Continued from previous page Enter the operating hours until the oven needs to be cleaned. Touch the check mark Enter Hours Between Cleanings Enter Hours Between Cleanings 1 2 3 4 5 6 7 8 9 < 0 VMC-TS-007919 Touch the up arrow then the back arrow...

  • Page 78: How To View The Oven Logs

    PERATION How to View the Oven Logs Before you begin The oven must be turned on (screen is on). Procedure To view the oven logs, do the following. Step Action Touch the gear icon . The User Configuration screen displays. User Configuration Ready to Cook Preheat...
  • Page 79 PERATION Continued from previous page Touch the back arrow then the back arrow to return to the User Configuration screen. XX/XX/XX XX:XX:XX – 3 GRILLED CHIC XX/XX/XX XX:XX:XX – 2 GRILLED CHIC XX/XX/XX XX:XX:XX – 1 GRILLED CHIC Press here to see logs details XX/XX/XX XX:XX:XX –...

  • Page 80: How To Adjust The Oven Light Duration

    PERATION How to Adjust the Oven Light Duration Before you begin The oven must be turned on (screen is on). Procedure To adjust the oven light duration, do the following. Step Action Touch and hold the oven light icon . The Enter Pass Code screen displays. Enter the pass code 12345 Touch...

  • Page 81: Maintenance

    AINTENANCE Maintenance Schedule ▪ Requirements See topic How to Clean the Oven. ▪ Make sure the oven is cooled down and off—inside of chamber 140°F (60°C) or less. Daily For daily maintenance, do the following. ▪ Remove any spills with disposable paper wipes or a damp cloth. ▪...

  • Page 82: How To Clean The Oven

    AINTENANCE How to Clean the Oven Before you begin WARNING: Electric shock hazard. Set the main disconnect switch to the OFF position to remove electric power from the appliance. CAUTION: Burn hazard. Allow the oven, utensils, and racks to cool before cleaning. CAUTION: Corrosive materials hazard.
  • Page 83 AINTENANCE Continued from previous page Weekly cleaning To clean the oven weekly, do the following. procedure Step Action the main disconnect switch to the OFF position. Make sure the oven is cool—chambers are less than 140°F (60°C). VMC-TS-006236 Spray the exterior areas of the oven with stainless steel polish. NOTICE Use only non-caustic cleaners.
  • Page 84 AINTENANCE Continued from previous page Monthly cleaning To clean the oven monthly, do the following. procedure Step Action the main disconnect switch to the OFF position. Make sure the oven is cool—chambers are less than 140°F (60°C). Remove the cooking racks and jet plates CAUTION: Personal injury hazard.
  • Page 85 AINTENANCE Continued from previous page Re-install the jet plates and cooking racks.  NOTE: Make sure the jet plates are installed correctly. The nozzles on the jet plates should be pointing towards the food. Cleaning the filters Remove the filters (if equipped) VMC-TS-006247 Spray...
  • Page 86 AINTENANCE This page intentionally left blank. Ve ct o r H™ Se r i es Op e ra to r ’ s Ma n u al MN- 4 65 4 8 Re v 1 1 1/ 1 9 ▪ ▪ ▪...

  • Page 87: Troubleshooting

    ROUBLESHOOTING What to do if the Fan Indicator Light Illuminates Procedure If the fan indicator light illuminates, do the following. Step Action Turn off the oven and allow it to cool. Remove the filters VMC-TS-007746 Clean the filters in a dishwasher. Re-install the filters.

  • Page 88: What To Do If The High Limit Screen Displays

    ROUBLESHOOTING What to do if the High Limit Screen Displays Procedure If the high limit screen displays, do the following. Step Action Press and release the high limit temperature reset button(s) Ready to Cook Preheat Link Set Temp High Limit Bacon French toast Fried eggs...

  • Page 89: Warranty

    ARRANTY Warranty Introduction Alto-Shaam, Inc. warrants to the original purchaser only, that any original part found to be defective in material or workmanship will be replaced with a new or rebuilt part at Alto-Shaam's option, subject to provisions hereinafter stated.
  • Page 90 No person except an officer of Alto-Shaam, Inc. is authorized to modify this warranty or to incur on behalf of Alto-Shaam any other obligation or liability in connection with Alto-Shaam equipment.

This manual is also suitable for:

Vector vmc-h3Vector vmc-h3hVector vmc-h4hVector vmc-h4Vector vmc-h2h

Table of Contents

Save PDF