Power Cord Specifications - Cisco Firepower 4100 Series Hardware Installation Manual

Power Cord Specifications

PID
FPR4K-SSD-BBLKD=
FPR4K-SSD200
FPR4K-SSD200=
FPR4K-SSD400
FPR4K-SSD400=

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords are available for connection to the security
appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note Only the approved power cords or jumper power cords provided with the security appliance are supported.
The following power cords are supported.
Figure 16: Argentina CAB-9K10A-AR
1
3
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
28
Plug: IRAM 2073
Connector: IEC 60320-C15
Description
SSD slot carrier (spare)
200-GB SSD for Firepower 4110 and 4120
200-GB SSD for Firepower 4110 and 4120 (spare)
400-GB SSD for Firepower 4140 and 4150
400-GB SSD for Firepower 4140 and 4150 (spare)
2 Cord set rating: 10 A, 250 V
Overview