Cisco Firepower 4100 Series Hardware Installation Manual page 19

Hide thumbs Also See for Firepower 4100 Series:
Table of Contents

Advertisement

Overview
1
3
5
The following table describes the cable specifications needed to keep the insertion loss as low as possible.
Table 2: 40-G BASE-SR Cable Specifications
Interface
Ethernet 40-G BASE-SR4
850 nm wavelength
MPO-12 port adapter
Note
See the
We recommend the following Cisco OM3 MTP/MPO cables.
Table 3: Cisco Cables
Cisco Part Number
CAB-ETH-40G-5M
CAB-ETH-40G-10M
CAB-ETH-40G-20M
Captive screw/handle
Bypass LED BP:
• Green—In standby mode.
• Amber, flashing—Port is in hardware
bypass mode, failure event.
• Amber—Port is in hardware bypass
mode, forced.
Network activity LEDs:
• Amber—No connection, or port is
not in use, or no link or network
failure.
• Green—Link up, no network activity.
• Green, flashing—Network activity.
Cisco 40GBASE QSFP Modules Data Sheet
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
40-G Network Module with Hardware Bypass
2
Ethernet X/1
Ports 1 and 2 are paired together to form
a hardware bypass pair.
Ethernet X/2
4
Ports 1 and 2 are paired together to form
a hardware bypass pair.
Supported Cable
50 microns core diameter
2000/4700 (OM3/4) modal bandwidth (MHz*km)
50 m cable distance
for specifications of the QSFP for the 40-G BASE-SR-4.
Cable Length
5 m
10 m
20 m
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents