Maintain Safety With Electricity; Prevent Esd Damage - Cisco Firepower 4100 Series Hardware Installation Manual

Hide thumbs Also See for Firepower 4100 Series:
Table of Contents

Advertisement

Maintain Safety with Electricity

• Keep tools away from walkways, where you and others might trip over them.
• Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that could get caught in the
• Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
• Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
• Never attempt to lift an object that is too heavy for one person.

Maintain Safety with Electricity

Warning
Before working on a chassis, be sure the power cord is unplugged.
Be sure to read the
appliance.
Follow these guidelines when working on equipment powered by electricity:
• Before beginning procedures that require access to the interior of the chassis, locate the emergency
• Do not work alone if potentially hazardous conditions exist anywhere in your work space.
• Never assume that power is disconnected; always check.
• Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension
• If an electrical accident occurs:
• Use the chassis within its marked electrical ratings and product usage instructions.

Prevent ESD Damage

ESD occurs when electronic components are improperly handled, and it can damage equipment and impair
electrical circuitry, resulting in intermittent or complete failure.
Cisco Firepower 4110, 4120, 4140, and 4150 Hardware Installation Guide
38
chassis.
Regulatory and Compliance Safety Information
power-off switch for the room in which you are working. Then, if an electrical accident occurs, you can
act quickly to turn off the power.
cables, frayed power cords, and missing safety grounds.
• Use caution; do not become a victim yourself.
• Disconnect power from the system.
• If possible, send another person to get medical aid. Otherwise, assess the condition of the victim,
and then call for help.
• Determine whether the person needs rescue breathing or external cardiac compressions; then take
appropriate action.
Installation Preparation
document before installing the security

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents