Power Cord Specifications - Cisco M195 Hardware Installation Manual

Power Cord Specifications

PID
CCS-PSU1-1050AC=
UCSC-RAILB-M4
UCSC-RAILB-M4=
UCSC-BZL-C220M5
UCSC-BZL-C220M5=
UCSC-BZL-C240M5
UCSC-BZL-C240M5=
SFP-10G-SR
SFP-10G-SR=
GLC-SX-MMD
GLC-SX-MMD=

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the SMA. The jumper power cords for use in racks are available as an optional alternative to
the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
The following power cords and jumper cords are supported.
Figure 15: Argentina CAB-250V-10A-AR
1
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
18
Plug: IRAM 2073
Description
SMA M695 and M695F 1050 AC power supply
(spare)
SMA M195, M395, M695, and M695F rail kit
SMA M195, M395, M695, and M695F rail kit (spare)
SMA M195 and M395 1 RU locking faceplate
SMA M195 and M395 1 RU locking faceplate (spare)
SMA M695 and M695F 2 RU locking faceplate
SMA M695 and M695F 2 RU locking faceplate
(spare)
ESA C695F 10-Gb SFP
ESA C695F 10-Gb SFP (spare)
ESA C695F 1-Gb SFP
ESA C695F 1-Gb SFP (spare)
Cord set rating: 10 A, 250 V
2
Overview