Operation With Non-Rechargeable Alkaline Batteries - sewerin miniLec 4 Operating Instructions Manual

4.2

Operation with non-rechargeable alkaline batteries

The MiniLec 4 instrument can be operated with new alkaline
batteries for at least 20 hours.
Proceed as follows to replace batteries or accumulators:
z Loosen the two lower screws on the back panel of the instru-
ment using the supplied screwdriver.
z Open the battery compartment.
z Insert the new cells. Ensure that the batteries are properly in-
serted to maintain correct polarity.
z Close the battery compartment.
z Retighten the two lower screws on the back panel of the in-
strument.
CAUTION!
A instrument operated with alkaline batteries cannot
be recharged in the docking station. If this instru-
ment is put into the docking station, a corresponding
message appears on display.
Note:
If it takes more than 120 seconds to replace the
batteries, you need to re-enter date and time the
next time you switch on the instrument. All other
data remains stored.
4 Charging and battery operation
39