TYPICAL AIR CONNECTION SCHEMATIC
2
1
Compressed air take-off
1
2
Shut-off valve
Air filter
3
Air regulator & gauge
4
3/2 solenoid valve, normally closed
5
Quick exhaust valve & silencer
6
CAP - 1/4" G
P1
CYL - 1/8" G
P3
The spray gun must be earthed to dissipate any electrostatic charges which may be created by fluid
or air flows. This can be achieved through the spray gun mounting, or conductive air/fluid hoses.
Electrical bond from the spray gun to earth should be checked and a resistance of less than 10⁶ Ohms
SB-E-2-642 R3.1
5
3
WARNING
is required.
8/24
P3
6
4
EN
P1