Important Notices
A bulkhead cap or sync cord must be attached to the housing
»
bulkhead for waterproof operation. Never submerge the
housing in water without either a sync cord or bulkhead cap
attached.
Do not pull the shutter trigger without a camera installed. You
»
may accidentally detach or damage the control spring.
Never leave a housing in a rinse tank, even if it is the only
»
system in the tank. Accidental damage may occur when the
user walks away from a housing while it is in the rinse tank.
Do not use alcohol, cleaning agents, spray lubricants, Rain-X,
»
or other solvents on the housing or lens port. Use of an
incompatible chemical compound can damage the plastic and
o-rings, and may result in leaking.
Accessory Port
Do not remove the Accessory Port Plug unless you are
»
installing a compatible accessory.
Your housing features one spare Accessory Port which may be used
for attachment of factory optional or aftermarket housing accessories.
The Accessory Port is 1/2-20 threaded.
Visit ikelite.com for information on optional accessories.
3