Tray Mounts; Accessory Port; Trigger Extension; Lanyard Mount - Ikelite 6171.11 Manual

Tray Mounts

This housing features two 1/4-20 threaded tray mounts on the bottom
of the housing. The spacing between the tray mounts is 3" (76.2 mm).
Optional tray with handles and mounting hardware are sold separately.
It is recommended to detach and thoroughly rinse the tray mounts,
tray, and mounting hardware, with fresh water routinely during
continuous use and prior to storage.

Accessory Port

This housing features one spare accessory port which may be used
for the attachment of optional accessories. This port accepts fittings
designed for a 1/2" through or 1/2-20 threaded hole.
The optional Vaccum Kit # 47012 may be installed in this location. A
hand pump with gauge allows you to draw a vacuum on the house
to simulate water pressure and check for leaks prior to entering the
water.
Visit ikelite.com for an updated list of compatible products.
Do not remove or loosen the accessory port plug unless you
»
are installing a compatible accessory.

Trigger Extension

The shutter lever may be extended to be closer to your hand when
using an optional tray with right-hand quick release handle. This
requires the Trigger Extension # 4077.93.
Trigger extension and tray with quick release handle are sold
separately.

Lanyard Mount

A lanyard with a thin cord may be attached to the housing using the
lanyard mount on back of the housing.
8