Table of Contents
Advertisement
Servicing Recommendations
It is recommended that the housing be sent to Ikelite or an authorized
service center annually for routine service and maintenance. Service
may be required more or less frequently depending on care and use.
Lubricating Controls
The housing's controls may need to be lubricated if they become
particularly difficult to use or if the o-rings have dried out during longer
periods of storage.
There will be some breaking force required to move the controls
initially after the housing has been in storage for long periods of time.
Remove controls for lubrication only if they continue to stick after
applying a small amount of lubricant to the exposed portion of the
shafts and working them many times.
Use only Ikelite lubricant. Other types of lubricant may cause
»
swelling of o-rings or cracking of plastic components.
Lubricant is not a sealant; it is used to reduce friction.
»
Excessive lubricant can collect sand, hair or debris which may
interfere with proper sealing.
Never use spray lubricants as the propellant ingredient can
»
cause the plastic housing to crack or o-rings to swell.
Lubricating Push Buttons
1. Press and hold the push button all the way in.
20
Advertisement
Table of Contents
