Main Control Panel Functions; J-Lx Control Panel - Jacuzzi LED Series Manual

3.0 Main Control Panel Functions

3.1 J-LX Control Panel

A. 2013+ P/N 6600-506 SMT panel (replaced 6600-239 early in 2013)
B. 2011-2012 P/N 6600-440
Button
LED Display: Can display current water temperature (default display), water temperature setpoint, selected
A
filtration/heating mode, and error messages.
Warmer Button: Increases water temperature setpoint.
B
Cooler Button: Decreases water temperature setpoint.
C
Light Button: Turns waterfall, footwell and accent lighting on in unison. Press once for high intensity, a sec-
ond time for medium intensity, a third time for low intensity, a fourth time to turn off. The displayed color is
D
changed using the light mode button (E) below.
Light Mode Button: Selects one of 4 color modes for waterfall, footwell and accent lighting.
E
Jets 1 Button: Turns jets pump #1 on and off. Press once for low speed; a second time for high speed and a
F
third time to turn off.
Jets 2 Button: Turns high-speed jets pump #2 on and off. Press once to turn on; a second time to turn off.
G
Heat Indicator: Lit when heater is on.
H
• Temperature Adjustment: 65 to 104°F (18 to 40°C); temperature override not possible. Software default setting is
100°F (38°C).
• Light System Operation: Light runs for 2 hours then shuts off.
• Jets Button Operation: Jets run for 20 minutes after activated then turn off automatically to conserve energy.
Simply press JETS Button to continue operation for an additional 20 minutes.
4
B C
A
D E
Display shown for example purposes only, actual water tem-
perature display will vary.
Function
OPERATION DETAILS
1
F
H
2
G